1 / 14

Autonomous Clock Project Part A GPS CLOCK INTERFACING WITH AN LCD

Autonomous Clock Project Part A GPS CLOCK INTERFACING WITH AN LCD. ECE 345 Design Project Professor Gary Swenson T.A. Ajay Patel Presented By: Antwan Williams. Project Goals. Design a clock that will display the correct time according to position. Use an LCD to display time and location.

newton
Download Presentation

Autonomous Clock Project Part A GPS CLOCK INTERFACING WITH AN LCD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Autonomous Clock Project Part AGPS CLOCK INTERFACING WITH AN LCD ECE 345 Design Project Professor Gary Swenson T.A. Ajay Patel Presented By: Antwan Williams

  2. Project Goals • Design a clock that will display the correct time according to position. • Use an LCD to display time and location.

  3. Description • Receive a signal from the Global Positioning System (GPS) that gives correct time and position. • Send that information to the HC12 Motorola Microcontroller. • Take that information and display it on the AND501/GST LCD. FOR MORE INFO...

  4. Technology • Ashtech’s GPS G8 OEM Boards • Small board • Needed programming • LCD interface not included • Used GPS NMEA standards • NMEA 0183 messages OEM: Original Equipment Manufacturer

  5. GPS Evaluate Software

  6. THE PLAN • HC12 use it’s transmission/receive registers to send NMEA commands to the GPS device. • HC12 would then receive time and location from the GPS device. • HC12 adjusts the time depending on the location it receives. • Uses index registers to display it on the LCD.

  7. SCHEMATIC

  8. SERIAL COMM. SOFTWARE FLOWCHART

  9. LCD SOFTWARE FLOWCHART

  10. CHALLENGES • HC12 didn’t have the correct pin numbers on their printed on their I/O board. • Broken LCD • Modifying the code to increment to the next character and cease it from outputting nonsense to the LCD.

  11. Modifications • Portability • Smaller GPS device • 4*8 character LCD

  12. $ COST OF HARDWARE • HC12 = $????.?? • GPS = $750.00 • LCD = $30.00

  13. NEW GPS WATCH BY CASIOFOR $499.00

  14. Team/Resources • Need for GPS watches… • Special Thanks to: • Ajay • Professor Swenson

More Related