1 / 12

Electrochemistry V

Electrochemistry V. Cell Potential, Electrical Work & Free Energy. Work. The work that is accomplished is due to the push behind the electron flow. The driving force, emf, is defined in terms of potential difference in volts between 2 points in the circuit.

neylan
Download Presentation

Electrochemistry V

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Electrochemistry V Cell Potential, Electrical Work & Free Energy

  2. Work • The work that is accomplished is due to the push behind the electron flow. • The driving force, emf, is defined in terms of potential difference in volts between 2 points in the circuit. • 1 volt = 1 Joule of work/ Coulomb of charge transferred

  3. Work • Work is viewed from the point of view of the system. • Thus, work flowing out of the system is indicated by a negative (-) sign. • Therefore, cell potential and work have opposite signs. • E = -w/q or work/charge • -w= E q

  4. Maximum work • Maximum work comes from maximum potential. • -wmax = q Emax or wmax=-q Emax • However during any electrical work, current must flow and from the flow some energy is lost through friction creating heat. • Thus, actual work is always less than the calculated maximum.

  5. Entropy • As electrical energy is lost to heat energy, the wires get hot and entropy increases.

  6. Cell Efficiency • Suppose you have a galvanic cell. • Your cell has a maximum potential (at zero current) of 2.50v. • In one experiment 1.33 moles of electrons were passed through the cell at an average potential of 2.10v • Actual work done w=-q E • E = actual potential of current flow 2.10 v

  7. Cell Efficiency • q = charge in coulombs • 1 mole electrons = 1 Faraday = 96,485 • q =nF =(1.33 mole e-)(96,485C/mol e-) • w=-q E • =-(1.33mol e-)(96485c/mol e-)(2.10J/C) • = -2.69 x105J

  8. Cell Efficiency • The max would be • Wmax = -q E • =-(1.33mol e-)(96485C/mol e-)(2.50J/C) • = -3.21 x 105J • Cell Efficiency • w/wmax x 100 • -2.69x105J X100 = 83.8% • -3.21x105 J

  9. Wmax = ΔG • Since the change in free energy equals the maximum useful work obtainable from this process. • Wmax = ΔG =-q Emax • q=nF • ΔG = -q Emax =-nF Emax • And at standard conditions • ΔG=-nF E˚

  10. Wmax = ΔG • So that the maximum cell potential is directly related to the free energy difference between the products and reactants in the cell. • This also confirms that the spontaneous galvanic cell has a positive Ecell which gives a - ΔG

  11. Using Standard reduction potential • Calculate ΔG˚ for the reaction • Cu2+(aq)+ Fe(s) Cu(s) + Fe 2+(aq) • Is this reaction spontaneous?

  12. Use your Cheat Sheet! • Cu2+(aq) + 2e- Cu (s) E° = 0.34V • Fe (s)  Fe 2+ (aq) + 2 e-E° = 0.44V

More Related