1 / 21

Physics 2102 Lecture: 04 THU 28 JAN

This lecture introduces the concept of electric flux and Gauss' Law in physics. Topics covered include electric charge, electric force, electric field, moving charges, electronic circuit components, magnetic field, electromagnetic waves, and more.

ngerman
Download Presentation

Physics 2102 Lecture: 04 THU 28 JAN

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Physics 2102 Jonathan Dowling Physics 2102 Lecture: 04 THU 28 JAN Flux Capacitor (Schematic) Gauss’ Law I Carl Friedrich Gauss 1777 – 1855

  2. What Are We Going to Learn?A Road Map • Electric charge- Electric force on other electric charges- Electric field, and electric potential • Moving electric charges : current • Electronic circuit components: batteries, resistors, capacitors • Electric currents-Magnetic field - Magnetic force on moving charges • Time-varying magnetic field - Electric Field • More circuit components: inductors. • Electromagneticwaves-light waves • Geometrical Optics (light rays). • Physical optics (light waves)

  3. STRONG E-Field Angle Matters Too Weak E-Field  dA Number of E-Lines Through Differential Area “dA” is a Measure of Strength What? — The Flux!

  4. E q normal AREA = A=An Electric Flux: Planar Surface • Given: • planar surface, area A • uniform field E • E makes angle q with NORMAL to plane • Electric Flux: F = E•A = E A cosq • Units: Nm2/C • Visualize: “Flow of Wind” Through “Window”

  5. E dA E Area = dA dA Electric Flux: General Surface • For any general surface: break up into infinitesimal planar patches • Electric FluxF = EdA • Surface integral • dAis a vector normal to each patch and has a magnitude = |dA|=dA • CLOSED surfaces: • define the vector dA as pointing OUTWARDS • Inward E gives negative fluxF • Outward E gives positive fluxF

  6. dA (pR2)E–(pR2)E=0 What goes in — MUST come out! dA Electric Flux: Example E • Closed cylinder of length L, radius R • Uniform E parallel to cylinder axis • What is the total electric flux through surface of cylinder? (a) (2pRL)E (b) 2(pR2)E (c) Zero L R Hint! Surface area of sides of cylinder: 2pRL Surface area of top and bottom caps (each): pR2

  7. dA 1 2 dA 3 dA Electric Flux: Example • Note that E is NORMAL to both bottom and top cap • E is PARALLEL to curved surface everywhere • So: F = F1+ F2 + F3 =pR2E + 0 – pR2E = 0! • Physical interpretation: total “inflow” = total “outflow”!

  8. Electric Flux: Example • Spherical surface of radius R=1m; E is RADIALLY INWARDS and has EQUAL magnitude of 10 N/C everywhere on surface • What is the flux through the spherical surface? • (4/3)pR2 E = -13.33p Nm2/C (b) 2pR2 E = -20p Nm2/C (c) 4pR2 E= -40p Nm2/C What could produce such a field? What is the flux if the sphere is not centered on the charge?

  9. r q Electric Flux: Example (Inward!) (Outward!) Since r is Constant on the Sphere — Remove E Outside the Integral! Surface Area Sphere Gauss’ Law: Special Case!

  10. S Gauss’ Law: General Case • Consider any ARBITRARY CLOSED surface S -- NOTE: this does NOT have to be a “real” physical object! • The TOTAL ELECTRIC FLUX through S is proportional to the TOTAL CHARGE ENCLOSED! • The results of a complicated integral is a very simple formula: it avoids long calculations! (One of Maxwell’s 4 equations!)

  11. Properties of Conductors Inside a Conductor in Electrostatic Equilibrium, the Electric Field Is ZERO. Why? Because If the Field Is Not Zero, Then Charges Inside the Conductor Would Be Moving. SO: Charges in a Conductor Redistribute Themselves Wherever They Are Needed to Make the Field Inside the Conductor ZERO. Excess Charges Are Always on the Surface of the Conductors.

  12. –15C Gauss’ Law: Conducting Sphere • A spherical conducting shell has an excess charge of +10 C. • A point charge of -15 C is located at center of the sphere. • Use Gauss’ Law to calculate the charge on inner and outer surface of sphere • (a) Inner: +15 C; outer: 0 • (b) Inner: 0; outer: +10 C • (c) Inner: +15 C; outer: –5 C R2 R1

  13. –5 C +15C –15C Gauss’ Law: Conducting Sphere • Inside a conductor, E = 0 under static equilibrium! Otherwise electrons would keep moving! • Construct a Gaussian surface inside the metal as shown. (Does not have to be spherical!) • Since E = 0 inside the metal, flux through this surface = 0 • Gauss’ Law says total charge enclosed = 0 • Charge on inner surface = +15 C Since TOTAL charge on shell is +10 C, Charge on outer surface = +10 C - 15 C = -5 C!

  14. Safe in the Plane!? Faraday’s Cage • Given a hollow conductor of arbitrary shape. Suppose an excess charge Q is placed on this conductor. Suppose the conductor is placed in an external electric field. How does the charge distribute itself on outer and inner surfaces? (a) Inner: Q/2; outer: Q/2 (b) Inner: 0; outer: Q (c) Inner: Q; outer: 0 • • Choose any arbitrary surface inside the metal • • Since E = 0, flux = 0 • • Hence total charge enclosed = 0 • All charge goes on outer surface! Inside cavity is “shielded” from all external electric fields! “Faraday Cage effect”

  15. Field on Conductor Perpendicular to Surface We know the field inside the conductor is zero, and the excess charges are all on the surface. The charges produce an electric field outside the conductor. On the surface of conductors in electrostatic equilibrium, the electric field is always perpendicular to the surface. Why? Because if not, charges on the surface of the conductors would move with the electric field.

  16. Charges in Conductors • Consider a conducting shell, and a negative charge inside the shell. • Charges will be “induced” in the conductor to make the field inside the conductor zero. • Outside the shell, the field is the same as the field produced by a charge at the center!

  17. Gauss’ Law: Conducting Plane • Infinite CONDUCTING plane with uniform areal charge density s • E is NORMAL to plane • Construct Gaussian box as shown. • Note that E = 0 inside conductor

  18. + + + + + + + + + + + + E = 0 Gauss’ Law: Conducting Example • Charged conductor of arbitrary shape: no symmetry; non-uniform charge density • What is the electric field near the surface where the local charge density iss? (a) s/e0 (b) Zero (c) s/2e0 THIS IS A GENERAL RESULT FOR CONDUCTORS!

  19. Summary: • Gauss’ law provides a very direct way to compute the electric flux. • In situations with symmetry, knowing the flux allows to compute the fields reasonably easily. • Field of an insulating plate: 0 ;of a conducting plate: 0 . • Properties of conductors: field inside is zero; excess charges are always on the surface; field on the surface is perpendicular and E=0.

More Related