1 / 43

2002 EPICS Seminar

2002 EPICS Seminar. Welcome EPICS'02. Institute of High Energy Physics Chinese Academy of Sciences 20-22 August, 2002. Introduction to BEPCII EPICS Seminar 2002 （ August 20, 2002, IHEP ）. From BEPC to BEPCII Basic Design Key Technologies Budget and schedule Summary.

nichellel
Download Presentation

2002 EPICS Seminar

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2002 EPICS Seminar Welcome EPICS'02 Institute of High Energy Physics Chinese Academy of Sciences 20-22 August, 2002

  2. Introduction to BEPCIIEPICS Seminar 2002（August 20, 2002, IHEP） • From BEPC to BEPCII • Basic Design • Key Technologies • Budget and schedule • Summary

  3. (1) From BEPC to BEPCII • Status of the BEPC • Why BEPCII • What is BEPCII

  4. 1.1 The Status of the BEPC

  5. The Layout of BEPC storage ring

  6. Main Parameters Beam Energy (E) 1.0 ~ 2.5 GeV Revolution frequency (fr) 1.247 MHz Lattice Type FODO + Low-b Insertions *x -function at IP (*x/ *y) 1.3/0.05 m Transverse Tune (x/y) 5.8/6.8 (Col. Mode) 8.72/4.75 (SR Mode) Natural Energy Spread (e) 2.64E 10-4 Momentum Com. Factor (p) 0.042 (Col. Mode) 0.016 (SR Mode) Hor. Natural Emittance (x0) 0.4@1.55 GeV, 0.076@2.2GeV(SR) mmmr RF Frequency (frf) 199.533 MHz Harmonic Number (h) 160 RF Voltage (Vrf) 0.6~1.6 MV Bunch Number (Nb) 1*1 (Col.), 60~80 (SR) Maximum Beam Current 50mA@1.55 GeV (Col.,) 130mA (SR) Luminosity 5 1030 cm-2 s-1@1.55 GeV, 11031 cm-2 s-1@1.89GeV

  7. Statistics of 00-01 Operation Start-up Fault Injection 6% 4% 12% BSRF MD 26% 10% BES 42%

  8. Daily J/y operation of BEPC Period Days Beam time (hrs.) J/y events Lmax(1030cm-2 s-1) t(hrs) 99-00 142 2323 24 M 4 8-10 00-01 110 1900 22 M 5 8-10

  9. Physics results from BEPC/BES

  10. BSRF dedicated operation 70 days with three times for about 300 users every year Imax=140 mA, ex0=76 nm, t=20~30 hrs., Ninj=2

  11. Synchrotron radiation application with BSRF

  12. 2.1 Why BEPCII • BEPC/BESI collected 9 106 J/yevents in about two years; • Upgraded BEPC/BESII obtained 5107 J/yevents in two years; • BEPC/BESI collected 4 106 y events; • BEPC /BESII operated for y from Nov. 23, 2001 to March 13, 2002; • With 1 106 a week, 1.4107 y was collected in 100 days; • Nice physics results are expected; • For our physics goal, 6 109 J/y2109 yper year are expected BEPCII/BESIII!

  13. 1.3 Luminosity Strategy of the BEPCII Multy-bunch kbmax~400,kb=1  93 Choose large ex & optimum param.: Ib=9.75mA, xy=0.04 Micro-b:by*=5cm  1.5 cm SC insertion quads Reduce impedance +SC RF sz=5cm  <1.5cm (LBEPCII/ LBEPC)D.R.=(5.5/1.5) 93  9.8/35=96 LBEPC=1.010 31 cm-2s-1 LBEPCII =110 33 cm-2s-1

  14. (2) The Basic Design • The double ring structure of BEPCII • Design Goals and Main Parameters • Lattice and Dynamic Aperture • Beam Collective Effects • Beam Lifetime & Average Luminosity

  15. 2.1 The double ring structure of BEPCII

  16. Mock-up of the double ring installation • There is no showstopper for the transportation, installation, mounting and dismount of the magnets. • The existing monuments for survey and alignment will be covered by the inner ring magnets. New monuments will be fixed on the wall of the tunnel. • The antechamber of the positron ring needs to be carefully designed to fit the crucial space between two rings; • The cable system, the cooling-watersystem, the pressure-air system and others need to be rearranged.

  17. Magnet girder and pre-alignment

  18. 2.2 Design Goals and Main Parameters

  19. Main Parameters

  20. 2.3Lattice and Dynamic Aperture

  21. 2.4 Single beam collective effects • Bunch length and impedance Vrf= 1.5MV, Z/n|eff0.2, Ith = 37mA Ib = 9.8mA, l ~ 1.3 cm • Beam-cavity interaction(with KEKB SC cavities) • Resistive wall x/y= 6.6/7.6,Nb = 99, Ib = 9.8mA,  = 4.3ms; • Ion effects • Electron cloud instability: Antechamber with TiN coating for e+ ring • Bunch feedback：tL=5 ms, tT=2 ms  • Single beam instabilities can be damped !

  22. 2.5 Beam-beam effects • Head-on beam-beam effect: similar to BEPC  x=0.04 has been demonstrated • Parasitic beam-beam effect c=112 mrad • Horizontal crossing angle c (5.5-11)2 mrad(BEPCII), 2.32 mrad(CESR) 112 mrad(KEKB), 12.5 2 mrad(DAFNE) • Beam-beam simulation for BEPCII with BBC code has shown that the beam-beam parameters and crossing angle of 11 mrad are acceptable.

  23. 2.5 Beam Lifetime and Average Luminosity Taking t =1.35 hrs., tf= 0.4 hr. and L0=11033 cm -2s-1, the optimized collision time is calculated as 1.0 hrs. and the maximum average luminosity is calculated as Lmax~ 0.51033 cm-2s-1. The top-off injection will further improve the average luminosity.

  24. (3) Key Technologies • Injector Upgrades • 500 MHz SC RF System • SC Micro-b Quads and IR • Magnet System • Power Supply System • Injection Kickers • Vacuum System • Instrumentation and Feedback • Control Upgrade

  25. BEPCII will apply state of art technologies

  26. 3.1 Injector upgrading • Basic requirement: • Higher intensity: positron injection rate  50 mA/min.; • Full energy injection with E=1.55 ~ 1.89 GeV; • To enhance the current and energy of the electron beam bombarding the target and to reduce the beam spot; • To design and produce a new positron source and to improve its focusing; • To increase the repetition rate from present 12.5 Hz to 50 Hz. • To consider multi-bunch injection (fRF/fLinac=7/40);

  27. The measures to increase positron intensity

  28. BEPCIIPositron Source

  29. 3.2 500 MHz SC RF System • Basic requirement • Sufficient RF voltage for short bunches. • Sufficient high RF power. • Suppressing the instabilities related to RF system. • Stable and reliable RF system

  30. RF Cavity in BEPCII Tunnel

  31. 3.3 SC Micro-bQuads and IR

  32. 3.4 Magnets System New arc magnets

  33. Two-in-one QuadrupoleIQ1

  34. Septum Bending magnetISPB Magnetic length 0.6m Magnetic Field 0.4 T Theckness 10mm Aperture 11078mm2 Current 2100 A Current density 52.7 A/mm2

  35. (5) Power Supplies System

  36. 3.6 Vacuum System • The BEPCII poses two challenges to the vacuum system, one is vacuum pressure （Arcs: 810-9Torr，IR: 510-10Torr）, other is the impedance. • Vacuum pressure Electron Ring Positron Ring

  37. Vacuum Chamber Design

  38. 3.6 Injection Kickers

  39. 3.7 Instrumentation and Feedback Beam Position Monitor Bunch Current Monitor Beam Feedback System Synchrotron Light Monitor IP beam position control ……

  40. 3.8 Control System BEPC WS console Ethernet PC subsystems VAX 4500 Injection Beam diagnostic Linac CAMAC PS, Vacuum, RF BEPCII 

  41. (4) Budget and Schedule The budget of BEPCII project is estimated as 640 MRMB. It is scheduled to finish in 4 years.

  42. (5) Summary • BEPC has been well operated with many exciting HEP and SR results for 13 years since it was put into operation in 1989. • BEPCII is proposed as micro-b plus multibunches with two rings and its design luminosity is order of magnitude higher than present BEPC in energy range of J/y, y  and y. • Some key technologies need to be developed to achieve the goal of BEPC II. • The international collaboration will be promoted in order to accomplish this challenging and exciting project on schedule and budget.

  43. May the EPICS’02 be a Great Success !

More Related