1 / 17

200-150 Exam Questions

If you have short time to prepared the Cisco CCNA Data Center 200-150 Exam? Visit Exams4sure and pass your exam in 1 day. We will provide you 200-150 Dumps with 100% passing guarantee. Our experts compiled to the point 200-150 study material for your success. Students trust us and teachers recommended us for the success. Our 200-150 Exam Questions & 200-150 Test Engine will help you to enhance your skills to perform 100% in your real exam. Visit us for more information. Get special discount by using this code. “xey20”. <br>https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

nikkibella43
Download Presentation

200-150 Exam Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pass Cisco CCNA Data Center 200-150 Exam by the help of Exams4sure 200-150 Exam Dumps

  2. About CCNA Data Center 200-150 The Cisco CCNA Data Center Routing and Switching written exam validate that professionals have the expertise to: configure, validate, and troubleshoot complex enterprise network infrastructure; understand how infrastructure components interoperate; and translate functional requirements into specific device configurations. Content By Cisco.com https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  3. There is a lot of website providing CCNA Data Center Routing and Switching 200-150 Dumps But Exams4sure.com Is one of the best website which provide you 100% Passing Guarantee + Money Back Guarantee Visit us Today

  4. Here are some Sample Questions You can also get a free demo before Purchase We believe in quality and success

  5. Question No 1: A network engineer is verifying Layer 2 connectivity of a server to a Cisco Nexus switch by checking the Address Resolution table statistics. Which command shows the MAC address, physical interfaced, VLAN and IP address of a server on a Cisco Nexus switch? A. Show Iparp interface B. Show Iparp C. Show Iparp detail D. Show arp detail Answer: C https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  6. Question No 2: Which address type is used in IPv4 but is not used in IPv6? A. Multicast B. Broadcast C. Anycast D. Unicast Answer: B https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  7. Question No 3: A network uses on pair of Layer 3 switches for core and distribution purposes. Which design is this network using? A. Collapsed core B. Collapsed distribution C. Collapsed Layer 3 core D. Collapsed Layer 2-3 Answer: A https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  8. Question No 4: What is the minimum number of disks that are needed in RAID 1? A. 4 disks B. 2 disks C. 8 disks D. 16 disks Answer: A https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  9. Question No 5: What is the minimum number of fabric modules that should be installed in the Cisco Ne*js 7000 chassis for N 1 redundancy using Ml-Series line card? A. 3 B. 4 C. 5 D. 6 Answer: A https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  10. Question No 6: Which address and subnet combination is valid for a host assignment? A. 172.23.175.210/15 B. 10.100.74.127/25 C. 192.168.73.223/29 D. 10.230.33.15/28 Answer: C https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  11. QUESTION 8 A customer requires two separate physical pathways between multiple initiators and multiple targets. Which technology meets this requirement on a single Cisco MDS9148 switch? A. zoning B. port security C. LUN masking D. VSANs Answer: D https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  12. Question No 8: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to switch technology? A. NTP B. Switch-to-Switch Connectivity C. Loop Prevention D. Access Vlans E. VLAN ACL Port ACL F. Switch Virtual Interface G. Port Security Answer: D https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  13. Question No 9: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition? A. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport mode access vlan 10 command. B. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport access mode vlan 10 command. C. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport vlan 10 access command. D. In Configuration mode, using the interface range Fastethernet 1/0/1 2, then switchport access vlan 10 command. Answer: D https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  14. Question No 10: The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition? A. Under the interface Serial0/0/0 configuration enter the ipnat inside command. B. Under the interface Serial0/0/0 configuration enter the ipnat outside command. C. Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command. D. Under the ip access-list standard nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command. Answer: C https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  15. Students Trust Us Hi this is Nicole Frive from the Texas and I would like to tell you that I whack my exam with the use of exams4sure dumps. I got the same questions in the exam I prepared from your test engine program. I will recommend your site to all my friends for sure.

  16. Why Choose US • 100% Passing Guarantee • 100% Money Back Guarantee • 3 Months Free Updates • Cisco CCNA Data Center Routing and Switching 200-150 Real Exam Scenarios • Real Exam Questions Simulator https://www.exams4sure.com/Cisco/200-150-practice-exam-dumps.html

  17. If You have any question about the exam or Anything else please let us know. For more Information visit us Thank you!!

More Related