1 / 13

Slitting Lines Complete Machine Manufacturer Company Nirmal Overseas Limited

If one is looking for Manufacturer Machine Company in Noida, It is in your best machine manufacturer company Nirmal Overseas limited.

nirtube
Download Presentation

Slitting Lines Complete Machine Manufacturer Company Nirmal Overseas Limited

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NIRMAL OVERSEAS LIMITED Call Us: 91-120- 4279670, 4281417

  2. TECHNICAL DESCRIPTION Machinery name : Slitting Machine Type : Automatic Electrical control : Machine is capable of Cutting sheet and Slitting from 0.5 mm 10 mm of wall thickness. Coil wall thickness range : 0.5 mm to 10 mm Coil weight : 5 to 30 ton. Coil material : MS/HR/CR/ GP Line Speed : 40 – 100 m/min.

  3. LIST OF EQUIPMENT • Coil rest saddle • Coil moving carriage • Snubber • Uncoiling • Strip pintching pressing and Leveling • Side / center support • Sheet cutting • Slitter/Shear • Coil inline separation device • Scrap removing • Looping device • Coil tensioner and feeding device • Coil rewinding • Coil car

  4. COIL REST SADDLE : This unit is placed at the starts point of complete operation for slitting. This coil is putted in to these saddles through crane for support. COIL CAR : This unit is placed underground which is used to lift the coil for loading on uncoiler center position. This unit is machined properly guided on the guide rods and bushes. Hydraulic Mechanism provide up and down motion. Capacity – 30 ton Driven by gear motor

  5. SNUBBER: Snubber roll device is placed on top of un-coiler and when the coil is tighten in the uncoiler this Vertical rollers help to presses the coil to rotate with Uncoiler and move on pintching and leveling. Pressing movement : By Hydraulic cylinder Roller : 350 Dia .

  6. UNCOILING : This unit is designed to take capacity of 30 Ton coil. When the coil is bought and tightened with the help of carriage ( coil car).The single mandrel type coil inner diameter and the movement is done Hydraulically. In addition a break is also provided so that the coil could enter according to the working manpower.

  7. STRIP PINCHING PRESSING AND LEVELLING: The unit can be centralized at anytime with the help of our supplied design. The design is capable of leveling and pinching different thickness and width of welding coil/strip ton its next operation of shearing and cutting. Pintching /Pressing is done by Hydraulic cylinder. Rollers are Hardened and grounded special Alloys steel with antifriction bearing and blocks. Pinch /Leveler rolls : 07 Pinch roll press : By Hydraulic cylinder Leveling press : By Hydraulic cylinder

  8. SHEET CUTTING : The function of this unit is to shear the strip from 0.5 mm – 6mm thick x 1600 mm. The shearing is achieved by two shear blades bottom blade is in horizontal position. It is fixed : top blade moves up and down and is fixed on angular position with respect to horizontal blades .The up and down movement of the top blade is achieved with the help of hydraulic cylinder and hydraulic power rack. SLITTER/SHEAR : This unit function is to cut primary coils into slitted coils. After the levelled coil which is supported by center and side guiding then its comes into the unit.

  9. The design is also made for the quick change of the cutter as the stand is been automatically been removed by hydraulic cylinder. Cutter shaft and Material : Hardened and grounded. Cutter material and make : SKD 11 standard make. SCRAP REMOVING : This unit is used to take out end strips fro the coil when it is Slitted by shear. The speed can be adjusted it is been conical design which can load the capacity till 1 ton with transmission mechanism and clutch system.

  10. COIL TENSIONER AND FEEDING DEVICE: This unit function is separate steel strip of slitter. Used break mechanism and Pressuring pad.

  11. COIL SEPARATION DEVICE : The device is placed on top of the Reeler/ Recoiler. When the coil is been rewinding into the slitted coil. This device is been pressed fitted with nitrile spacers and hydraulic cylinder. COIL REWINDING/RECOILING : The unit is been uncoiled – levelled –slitted –tension with the help of reeling shafts which rotate the shaft and rewind the slitted coils with the help of a seperator device. This unit drum which automatic collapse and Expends the inner diameter of the coil with the help of hydraulic mechanism with break control.

  12. COIL CAR : This unit is used to lift the coil for unloading on Recoiler center position. This unit is machined properly guided on the guide rods and bushes. The hydraulic Mechanism is provided for up and down motion.

  13. If looking for Manufacturer Machine Company in Noida, he or she searches a machine its your best machine manufacturer company Nirmal Overseas limited. • Contact Us: • NIRMAL OVERSEAS LTD. • PLOT NO. 147, N.S.E.Z. NOIDA (U.P.) – 201305 INDIA • Phone: +91-120-4279670 • +91-120-4281417 • Mobile: +91-9810292199 / +91-8826354666 • Email: sales@nirmaloverseas.com, • nirmal@nirmaloverseas.com • Website: http://www.nirmaloverseas.com • Production: 36 KM Stone, Ganpati Industrial Area Bahadurgarh Haryana

More Related