1 / 19

Programming your Christmas Lights

Programming your Christmas Lights. Andrew Konkol Technical Architect at Sentry Insurance Creator/Designer of the Konkols Christmas Light Show. CLAP. C hristmas L ight A ddiction P roblem. Music. Turns flashing lights into Magic Classics, Pop, Rock TSO: Trans-Siberian Orchestra.

nitsa
Download Presentation

Programming your Christmas Lights

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Programming your Christmas Lights Andrew Konkol Technical Architect at Sentry InsuranceCreator/Designer of the Konkols Christmas Light Show

  2. CLAP Christmas Light Addiction Problem

  3. Music • Turns flashing lights into Magic • Classics, Pop, Rock • TSO: Trans-Siberian Orchestra

  4. Sequencing/Scheduling Software • Ties lighting effects (on/off, fades, chases, etc) to a timeline, in sync with music • Bitmap vs. Vector • Popular Free • Vixen (2.1, 3.0, Vixen+) • HLS • Nutcracker • xLights • Not free • Light Show Pro (LSP) – $100-$400 • Light-O-Rama (LOR) - $50-$400

  5. Computer • Most software is Windows-based • Needed for Sequencing • Needed for controlling the show and playing music during showtime • Unless you are using a stand-alone controller

  6. Power (Electricity) • AC • Traditional incandscents, LED lights from the store • Dimming requires zero-cross detector • DC • Needed for modern LED-based lighting • 5V, 12V common • PC Power supply works well for this • Need to consider total power required (Amps/Watts) • Outdoor = GFCI

  7. Zero Cross Detection

  8. FM Transmitter/Antenna • Gets music into the warm cars of visitors • Low Power (avoid attention of FCC) • Dipole antenna • www.radio-locator.com • RDS (Radio Data System)

  9. Protocols / Interfaces • RS-485-based • DMX • Renard • LOR • PixelNet • Ethernet-based • E1.31 (DMX-over-Ethernet or Streaming ACN) • Pixel protocols • WS2801, TM180x, WS2811, TLS3001, GE Color Effects • Protocol converters • Examples: Etherdongle (takes in E1.31, outputs PixelNet), E1.31-to-DMX/Renard bridges, etc.

  10. Controllers • Takes in information on a protocol bus and turns it into blinky-flashy • Use microcontrollers • PIC by Microchip • Programmed in C or Assembly; flashed with PicKit • Parallax Propeller • Programmed using proprietary “Spin” language; flashed with “Prop Plug” • 8 Cores • Arduino

  11. Controllers – AC • Uses Solid-State Relays (SSRs) • On-board: AC switching happens on the same board as the protocol processing • Off-board: AC switching happens remotely – 5V signal connects SSRs to main board • Fancy power-strip • Examples include Renard SS (8, 16, 24), Renard 64, Lynx Freestyle, Lynx Express, Helix, LOR

  12. Controllers - DC • May either switch a DC power source (using DC SSRs), or provide power directly • Commonly controls RGB floodlights, strips, or “dumb” RGB strings • Examples include Renard4Flood, Ren48LSD, Renard 64, PixelNet Dumb String Controller (DSC)

  13. Controllers - Pixel • Takes input protocol and produces pixel protocols to control “smart” RGB nodes • Provides constant DC power, plus a “data” signal to tell individual nodes to set RGB output levels (providing 256^3 = 16M color possibilities) • Examples include PixelNet Smart String Controller (SSC), PixelNet Zeus, SanDevices E68x series, J1SYS EthConGateway (ECG), RPM Pixel Bridge

  14. Controllers – Stand-alone • Some controllers can run the whole show • No computer needed at showtime • Theoretically could provide a more robust platform (Windows is not a real-time OS) • Files (MP3, sequences) stored on removable media • Just hook up other controllers, lights, and an FM transmitter, and you’re set • Examples include Helix and EtherDongle with Conductor daughter board

  15. Lights! • Incandescent • 1 channel per string • AC LEDs • 1 channel per string • DC LEDs, including “dumb” strips/strings/floods • RGB strings typically use 3 channels per string • Pixels (“smart” strips, strings, modules) • Typically use 3 channels per node, so a string of 50 would use 150 channels

  16. Topology • How does it all connect together? • It all depends! • What protocols, controllers, lights are you using? • Centralized versus decentralized • Data and power connections

  17. Topology of my show

  18. Resources • www.doityourselfchristmas.com – General DIY lighting forum. Renard, Vixen, E68x, Audrino, HLS • www.diylightanimation.com– Lynx, SmartStrings, Etherdongle, LSP, xLights • www.diyledexpress.com– Lots of LED-based products, boards, kits, enclosures • www.holidaycoro.com – Corrugated plastic props, DMX-based stuff, RGB • www.aliexpress.com/store/701799- Ray Wu’s store – lots of RGB products, direct from China (message Ray direct to get a combined shipping quote) • www.lightorama.com – Commercial (non-DIY) lighting control products • www.lightshowpro.com – Home of LSP • www.vixenlights.com – home of Vixen, including latest 3.0 releases • www.auschristmaslighting.com- Australian forum – lots of DC-based stuff (RGB, etc) • Don’t forget to check out the Wikis – most forums have one

  19. Questions? • Andrew.Konkol@outlook.com • https://www.facebook.com/KonkolsChristmasLightShow

More Related