1 / 8

V irtual I nteractive E ngineering on the W eb ( VIEW )

V irtual I nteractive E ngineering on the W eb ( VIEW ). Project Report February 5, 2008 Carlos Sanchez Ivan Sopin. What’s Been Done. The project team went to the GaTech Savannah’s campus and familiarized with the machine Pictures and measurements of the machine were taken.

nitsa
Download Presentation

V irtual I nteractive E ngineering on the W eb ( VIEW )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Virtual Interactive Engineering on the Web(VIEW) Project Report February 5, 2008 Carlos Sanchez Ivan Sopin

  2. What’s Been Done • The project team went to the GaTech Savannah’s campus and familiarized with the machine • Pictures and measurements of the machine were taken Left to right: Patrick Hager, Carlos Sanchez, Dr. Wayne M. Johnson, Dr. Felix G. Hamza-Lup, Ivan Sopin, and Dr. Priya T. Goeser (not in the picture)

  3. What’s Been Done (cont.) • The tensile testing machine Solidworks model is almost finished

  4. What’s Been Done (cont.) • Design of the website was slightly improved (new header, resources section, link to the simulator, etc.):

  5. What’s Been Done (cont.) • The interface of the controller was replicated, and a prototype of the webpage with the simulator was created:

  6. Model of the grip vice Controller’s interface Simulation graph

  7. What’s to be Done • Complete the controller model • Double-check all measurements • Find out and implement the functionality of the controller • Set the input data format and be able to plot it correctly • Provide scene/controller/graph interaction • Run some basic simulations

  8. Questions?

More Related