1 / 10

New tool for beam break-up analysis

New tool for beam break-up analysis. TM 110. y. y. 2 nd pass deflected beam. z. x. injected beam. E. B. Reasons for writing a new code: TDBBU weaknesses need for new features need for an ‘in-house’ code. bi - ‘beam instability’ code. Features: allows any ERL topology

nlillian
Download Presentation

New tool for beam break-up analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. New tool for beam break-up analysis TM110 y y 2nd pass deflected beam z x injected beam E B • Reasons for writing a new code: • TDBBU weaknesses • need for new features • need for an ‘in-house’ code

  2. bi- ‘beam instability’ code Features: • allows any ERL topology • cleaner algorithm than TDBBU (very likely a personal bias) • written in C++ (compiles with GNU GCC, i.e. all major OS) • faster than TDBBU (a single 5 GeV ERL run takes less than a minute; execution time is estimated to be 7-9 times faster than TDBBU when no coupling is present; with coupling it is estimated to be at least 4 times faster) • easier to use

  3. Basic algorithm Expand beam line into a consecutive list of cavities (pointers) in the same order a bunch sees them in its lifetime (from injection to dump); Link pointers to actual HOMs; Start filling beam line with bunch train; Determine which pointer sees a bunch next; Update wake-field in HOM which is pointed by the pointer; Push the bunch to next pointer, store its coordinates until they are needed by any bunch that will reach this point next; consecutive list of cavities: 1 2 3 … N – 2 N – 1 N actual HOMs (n  N): hom 1 hom 2 … hom (n – 1) hom n

  4. Wake arithmetics Wake function due to single bunch: Electrons in “test” bunch will get a kick: Same for “test” bunch trailing behind a bunch train {qn, dn}: “t” “e” t

  5. Horner’s trick Problem: evaluate polynomial: an xn + an–1 xn–1 + … + a1 x + a0 Correct answer: (…(anx + an–1) x + an–2) x + … ) x + a0 In the same vein: Introduce complex kick from HOM: CPU expenses then become linear with the size of the problem

  6. moving average LSM findbi– utility to find threshold Features: • uses amplitude of complex kick due to HOM to determine whether case is stable • uses bisection method to find threshold until derivative of wake amplitude growth rate vs. beam current stabilizes, then uses Newton-like method • finds threshold with 0.1 % accuracy in a typical  8 iteration calls

  7. Calibration: single HOM recirculator 1st order perturbation approach fails

  8. HOM frequency randomization (fixed current) rms = 0 Hz rms = 33 kHz rms = 42 kHz rms = 46 Hz rms = 53 kHz rms = 67 kHz

  9. Simulation example: ‘ERL in CESR tunnel’ single “worst” HOM: R/Q = 51.5 , Q = 50000, f = 2575 MHz frequency spread applied (rms): 3 MHz smallest threshold found so far: 163 mA (linac lattice DCS, 04/01/03, max beta 80 m)

  10. no displacement 2.8 mm (rms) 5.6 mm (rms) HOM displacement effect • No change in threshold due to displacement errors is observed. • There is emittance growth when operating near the threshold. • Average kick amplitude grows.

More Related