DHC P Dynamic Host Configuration Protocol

1. DHC PDynamic Host Configuration Protocol

2. DHCP Overview • Used to automatically deliver IP addresses and Network settings • The purpose of DHCP is to assign network settings centrally from a server rather than configuring them locally on each and every workstation. • DHCP Server service must be installed and configured on machine that will function as DHCP server • Reduces the amount of time you spend configuring computers on your network • Used by client by default unless you specify otherwise • When configuring a newly detected card it auto sets itself as a dhcp client

3. Leasing an IP Address • An IP address is leased during the boot process • The overall process is composed of four broadcast packets: • DHCPDISCOVER • DHCPOFFER • DHCPREQUEST • DHCPACK

4. Leasing an IP Address (continued)

5. Leasing an IP Address (continued) • A DHCP transaction begins when a client sends out a DHCP DISCOVER packet which is a broadcast packet. The packet contains only the client’s hardware address. • The DHCP server receives the DHCP DISCOVER packet from the client. If an IP address on the client subnet is available it makes an offer by sending a DHCP OFFER packet to the client. The offer packet contains the following information: • Proposed IP address for the client • Server information: i.e, name / IP • Other configuration information

6. Leasing an IP Address (continued) • The client receives the DHCP OFFER packet. The client may receive more than one offer if more than one DHCP server exists on the network. If the client is interested in the offer, it sends a DHCPREQUEST packet to the server. This indicates a formal request to lease the IP address offered by the server. • The DHCP server receives the DHCPREQUEST packet and leases an IP address to the client. The server sends a DHCPACK packet to the client. This is an official notification that the address has been granted and the client can start using the IP address and options in the lease.

7. Renewing an IP Address • The IP address can either be permanent or timed • A permanent address is never reused for another client • Timed leases expire after a certain amount of time • Clients attempt to renew their lease based on the configured lease time • A DHCP server may either honor or reject a renew request

8. Renewing an IP Address (continued)

9. DHCP Server and Client • DHCP Server daemon (dhcpd) does not automatically get installed during a typical installation. • It can be installed during the OS installation or, • It can be installed via Yast or • It can be installed from the command line • DHCP client • 2 DHCP Clients are available • dhcp client daemon (dhcpcd) • Internet Systems Consortium (ISC) dhcp-client • OpenSuse uses dhcpcd by default. It does not need a configuration file • ISC dhcp-client can be used for more complex situations and does require a configuration file (/etc/dhclient.conf)

10. DHCP Server Configuration/etc/dhcpd.conf file • The /etc/dhcpd.conf file contains configuration information for the DHCP Server. • It can be modified with Yast or with a text editor • If a text editor is used, check syntax and restart service • rcdhcpd check-syntax • rcdhcpd restart

11. Server Commands • chkconfig • chkconfig dhcpd -- to view the boot status of dhcpd • chkconfig dhcpd on – to configure dhcpcd to start at boot • chkconfig dhcpd off – to configure dhcpcd to not start at boot • rcdhcpd • rcdhcpd check-syntax – to check the syntax of /etc/dhcpd.conf • rcdhcpd status – displays the status of the dhcp server service • rcdhcpd start –starts the dhcp server • rcdhcpd stop – stops the dhcp server

12. Client Commands Note: in each command, replace the pound sign (#) with the ethernet card number • ifconfig eth# -- to view the current IP address and IP settings of the eth# card • dhcpcd eth# -k -- forces dhcpcd to release the dhcp lease • dhcpcd eth# -n -- forces dhcpcd to try to renew the dhcp lease • ifdown eth# - to bring down the specified Ethernet card • ifup eth# - to bring up the specified Ethernet card (Do not use ifup and ifdown to ‘renew’ dhcp settings.)

13. Files Server • /etc/dhcpd.conf – server configuration file • /var/lib/dhcp/db/dhcpd.leases – stores client leases assigned by dhcpd • /etc/sysconfig/network/ifcfg-eth# - stores network card settings for eth# • /var/log/rc.dhcpd.log - log file for dhcpd Client • /var/lib/dhcpcd/dhcpcd-eth#.info – contains dhcp settings assigned to client from server • /etc/resolv.conf – shows dns settings of machine. At client, this will show what settings have been received by dhcp server • /etc/sysconfig/network/ifcfg-eth# - stores network card settings for eth#

14. Creating DHCP Fixed Addresses • Fixed Addresses (aka reservations) areused to hand out a specific IP address to a particular client • Useful when delivering IP addresses to devices that would normally use static addresses • Configure in Yast’s DHCP Server configuration / Host Management or by manually editing the dhcpd.conf file • Fixed Addresses are created based on MAC addresses • Commands that will display the MAC address of a card include: • ifconfig eth# • ifstatus eth# • ip link show eth# • Sample entry in dhcpd.conf file for fixed/static IP Address host apex { fixed-address 192.168.1.4; hardware ethernet 00:A0:78:8E:9E:AA; }

15. Creating DHCP “Exclusions” • No Exclusion entries exist for the dhcpd.conf file • To Exclude an IP address or range of IP addresses, specify the ranges around it. • For example on the 192.168.1.0 network, to exclude 192.168.1.101 through 192.168.1.150 from being distributed by the DHCP server, use the ranges (192.168.1.1 to 192.168.1.100) and (192.168.1.151 to 192.168.1.254) • Configure multiple ranges in Expert Settings within Yast’s DHCP Server configuration. The dhcpd.conf entry would look something like this: subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.1 192.168.1.100; range 192.168.1.150 192.168.1.254; }

16. Configuring a DHCP Relay • DHCP packets cannot travel across a router • A relay agent is necessary in order to have a single DHCP server handle all leases on both network segments • The Linux DHCP Relay Agent (dhcrelay) allows you to relay DHCP and requests from a subnet with no DHCP server on it to one or more DHCP servers on other subnets.

17. Configuring a DHCP Relay • Relay agents receive broadcast DHCP packets and forward them to a DHCP server. • When a DHCP client requests information, the DHCP Relay Agent forwards the request to the list of DHCP servers specified when the DHCP Relay Agent is started. • dhcp-relay must be installed (Yast or zypper install) • To start the DHCP Relay Agent use the command dhcrelay server-ip.

18. One physical network segment One logical subnet (192.168.1.0) One DHCP Server Single range is used to service all DHCP clients on Subnet A Single Subnet dhcpd.conf entry: subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.10 192.168.1.254; }

19. One physical network segment Multiple logical subnets 192.168.1.0 192.168.2.0 192.168.3.0 Three separate subnets must be shared One DHCP Server services all clients on Subnet A with an IP address from the shared network settings Router configured with multiple addresses to allow packets to move from one logical network to another dhcpd.conf entry: shared-network shared { subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.10 192.168.1.254; } subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.10 192.168.2.254; } subnet 192.168.3.0 netmask 255.255.255.0 { range 192.168.3.10 192.168.3.254; } } Shared-Networkmultiple subnets on same physical network(aka superscope)