1 / 9

Applying TFI-5 and Understanding The Backplane Environment

Applying TFI-5 and Understanding The Backplane Environment. John D’Ambrosia Tyco Electronics. Agenda. TFI-5 The Evolution of the Interconnect Variability of the Backplane Environment Example – Transmit De-Emphasis as a Solution The Common Electrical Interface. TFI-5.

nonnie
Download Presentation

Applying TFI-5 and Understanding The Backplane Environment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Applying TFI-5 and Understanding The Backplane Environment John D’Ambrosia Tyco Electronics

  2. Agenda • TFI-5 • The Evolution of the Interconnect • Variability of the Backplane Environment • Example – Transmit De-Emphasis as a Solution • The Common Electrical Interface

  3. TFI-5 • Point-to-point connection between a TDM framer and a TDM switch fabric device • 30 inches (76 cm) of total PCB trace including two connector • Support lane bandwidths of 2.488 Gb/s (3.11 Gb/s optional) • Support higher bandwidth across multiple lanes • Example – 4 TFI-5 Lanes  OC-192 Traffic • Lane Deskew • Capable of checking for errors • Capable of bit error rate of 10E-12 for PCB

  4. Semiconductors Equalization Board Interface Board Interface Higher Performance Media Higher Performance Media P a s s i v e P a s s i v e Channel Architecture Connectors Pre-emphasis Transmission Media Loss Properties Encoding Techniques Length Construction Alternate Drilling Alternate Drilling Evolution of the Interconnect A c t i v e F r e q u e n c y Active Length

  5. Variability of Backplane Environment 34” System Length, 0.200” Backplane

  6. Example - Transmit Emphasis as a Solution

  7. Impact of Transmit Emphasis

  8. Next - Common Electrical Interface • 4.976 to 6+ Gigabit and 9.95 to 11+ Gigabit signaling. • Short reach (0 to 200 mm with up to one connector) • Long reach (0 to 1m with up to two connectors) • Example – Backplane Application (0.86m) at 5 Gb/s Tx Output No Equalization Rx Input No Tx Equalization Rx Input With Tx Equalization

  9. Acknowledgements • Slide #4 – D’Ambrosia, Fogg, Laziris-Brunner, and Tailor, “Reliable Serial Data Transmission at 10 Gb/s,” DesignCon 2002. • Slides #5 and #8- D’Ambrosia and Woodruff, “The High-Speed Backplane Initiative – The Technical Challenges It Faces,” DesignCon 2003. • Slides #6 and #7, D’Ambrosia, Dalmia, and Debie, ”The Importance of XAUI Channel Analysis,” Integrated Communications Design July, 2002.

More Related