1 / 72

Con 1 units

Con 1 units. The Scientific Method. 1. Observe the problem 2. collect data 3. search for laws that describe the problem 4. form a hypothesis 5. form a theory 6. test or modify the theory. Steps for the Scientific Method. Step # 1 – Observation

noreen
Download Presentation

Con 1 units

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Con 1 units

  2. The Scientific Method • 1. Observe the problem • 2. collect data • 3. search for laws that describe the problem • 4. form a hypothesis • 5. form a theory • 6. test or modify the theory.

  3. Steps for the Scientific Method Step # 1 – Observation • Observation – the act of gathering information (data) • Qualitative data – information with NO numbers • (hot, blue, rainy, cold) • Quantitative data – information with numbers • (98°F, 80% humidity, 0°C)

  4. Steps for the Scientific Method Step # 2 – Form a Hypothesis • Hypothesis – tentative explanation for what has been observed • There is no formal evidence at this point • It is just a gut feeling

  5. Steps for the Scientific Method Step # 3 – ExperimentationExperimentation – a set of controlled observations that test the hypothesis • Independent variable – the thing that you change in the experiment • Dependant variable – the thing that changes because you changes the independent variable • Constant – something that does not change during the experiment • Control – the standard for comparison

  6. For example… • Let’s say we are going to do an experiment testing what happens when you heat and cool a balloon… We will start with a balloon at room temperature

  7. Now we will change something… I will add heat to one balloon It will expand What will happen to the balloon’s size?

  8. Now let’s cool things down I will add cool down the balloon It will get smaller What will happen to the balloon’s size?

  9. So what is what? • What variable did YOU change? • Temperature • What variable changes BECAUSE you changed the temperature? • Size of the balloon • What is did not change in the experiment? • Amount of air in the balloon, what the balloon is made of… • What balloon did you use to compare the others to? • The room temperature balloon (Independent Variable) (Dependent Variable) (Constant) (Control)

  10. Steps for the Scientific Method Step # 4 – Conclusion • Conclusion – judgment based on the information obtained

  11. Data Analysis: Basic Concepts Topic 3 Base Units • There are seven base units in SI. • A base unit is a defined unit in a system of measurement that is based on an object or event in the physical world. • A base unit is independent of other units. • Some familiar quantities that are expressed in base units are time, length, mass, and temperature.

  12. Data Analysis: Basic Concepts Topic 3 Base Units

  13. Data Analysis: Basic Concepts Topic 3 Time

  14. Data Analysis: Basic Concepts Topic 3 Derived Units • Not all quantities can be measured with base units. • For example, the SI unit for speed is meters per second (m/s).

  15. Data Analysis: Basic Concepts Topic 3 Volume  • Volume is the space occupied by an object. • The derived unit for volume is the cubic meter, which is represented by a cube whose sides are all one meter in length. • For measurements that you are likely to make, the more useful derived unit for volume is the cubic centimeter (cm3).

  16. Data Analysis: Basic Concepts Topic 3 Temperature Scales • Scientists use two temperature scales. • .

  17. Data Analysis: Basic Concepts Topic 3 Temperature Scales • The defined the freezing point of water is 0 and the boiling point as 100.

  18. Data Analysis: Basic Concepts Topic 3 Temperature Scales • The Kelvin scale was devised by a Scottish physicist and mathematician, William Thomson, who was known as Lord Kelvin. • A Kelvin (K) is the SI base unit of temperature. • On the Kelvin scale, water freezes at about 273 K and boils at about373 K.

  19. Significant Figures • Scientist use significant figures to determine how precise a measurement is • Significant digits in a measurement include all of the known digits plus one estimated digit

  20. For example… • Look at the ruler below • Each line is 0.1cm • You can read that the arrow is on 13.3 cm • However, using significant figures, you must estimate the next digit • That would give you 13.30 cm

  21. Let’s try this one • Look at the ruler below • What can you read before you estimate? • 12.8 cm • Now estimate the next digit… • 12.85 cm

  22. The same rules apply with all instruments • The same rules apply • Read to the last digit that you know • Estimate the final digit

  23. Let’s try graduated cylinders • Look at the graduated cylinder below • What can you read with confidence? • 56 ml • Now estimate the last digit • 56.0 ml

  24. One more graduated cylinder • Look at the cylinder below… • What is the measurement? • 53.5 ml

  25. Rules for Significant figuresRule #1 • All non zero digits are ALWAYS significant • How many significant digits are in the following numbers? • 3 Significant Figures • 5 Significant Digits • 4 Significant Figures • 274 • 25.632 • 8.987

  26. Rule #2 • All zeros between significant digits are ALWAYS significant • How many significant digits are in the following numbers? 3 Significant Figures 5 Significant Digits 4 Significant Figures 504 60002 9.077

  27. Rule #3 • All FINAL zeros to the right of the decimal ARE significant • How many significant digits are in the following numbers? 3 Significant Figures 5 Significant Digits 7 Significant Figures 32.0 19.000 105.0020

  28. Rule #4 • All zeros that act as place holders are NOT significant • Another way to say this is: zeros are only significant if they are between significant digits OR are the very final thing at the end of a decimal

  29. Rule #5 • All counting numbers and constants have an infinite number of significant digits • For example: 1 hour = 60 minutes 12 inches = 1 foot 24 hours = 1 day

  30. How many sig. Figs. Are in the following numbers? • 56784 • 40002 • 600 • 34081000.00 • 123.4005 • 38726.000 • 7162534 • 100 • 200.0004

  31. Data Analysis: Basic Concepts Topic 3 Scientific Notation • When numbers larger than 1 are expressed in scientific notation, the power of ten is positive. • When numbers smaller than 1 are expressed in scientific notation, the power of ten is negative.

  32. Data Analysis: Basic Concepts Topic 3 Convert Data into Scientific Notation • Remove the extra zeros at the end or beginning of the factor. • Multiply the result by 10n where n equals the number of places moved. • Remember to add units to the answers.

  33. Significant Digits in Calculations • Now you know how to determine the number of significant digits in a number • How do you decide what to do when adding, subtracting, multiplying, or dividing?

  34. Rules for Addition and Subtraction • When you add or subtract measurements, your answer must have the same number of decimal places as the one with the fewest • For example: 20.4 + 1.322 + 83 = 104.722

  35. Addition & Subtraction Continued • Because you are adding, you need to look at the number of decimal places 20.4 + 1.322 + 83 = 104.722 (1) (3) (0) • Since you are adding, your answer must have the same number of decimal places as the one with the fewest • The fewest number of decimal places is 0 • Therefore, you answer must be rounded to have 0 decimal places • Your answer becomes • 105

  36. Rules for Multiplication & Division • When you multiply and divide numbers you look at the TOTAL number of significant digits NOT just decimal places • For example: 67.50 x 2.54 = 171.45

  37. Multiplication & Division • Because you are multiplying, you need to look at the total number of significant digits not just decimal places 67.50 x 2.54 = 171.45 (4) (3) • Since you are multiplying, your answer must have the same number of significant digits as the one with the fewest • The fewest number of significant digits is 3 • Therefore, you answer must be rounded to have 3 significant digits • Your answer becomes • 171

  38. Accuracy vs. precision • The quality of a measurement depends on the measuring instrument and the person making the measurement. • Accuracy = how close the measurement is to the actual value. • Precision = the agreement among the values for the measurement.

  39. For Example… • Let’s say we had the following dart board Is the accuracy good or bad? Accuracy - GOOD Precision - GOOD Is the precision good or bad?

  40. Try this one • Let’s say we had the following dart board Is the accuracy good or bad? Accuracy - BAD Precision - GOOD Is the precision good or bad?

  41. Try this one • Let’s say we had the following dart board Is the accuracy good or bad? Accuracy - BAD Precision - BAD Is the precision good or bad?

  42. Ways to determine density • 1. regularly shaped objects – direct volume measurement. • 2. Irregularly shaped objects- use water displacement method to fine volume.

  43. Data Analysis: Basic Concepts Topic 3 Derived Units • Notice that meters per second includes two SI base units—the meter and the second. A unit that is defined by a combination of base units is called a derived unit. • Two other quantities that are measured in derived units are volume and density.

  44. Dimensional Analysis • Dimensional analysis is just a big word for going from one unit to another. • Have you ever converted inches into feet or years into days? • If so, then you have done dimensional analysis

  45. Dimensional Analysis • Dimensional Analysis – method of problem-solving that focuses on changing units • Conversion Factor – a ratio of equal values used to go from one unit to another • Example: 1 foot = 12 inches • Can be written as 1 foot 12 inches

  46. Rules for Dimensional Analysis • ALWAYS start with the given!!! • Draw a multiplication sign and a line • Place the unit to be canceled on the bottom • Place a conversion factor on the line you have drawn • Cross out units and see what you have left. • You must have one on top & one on the bottom A x B A / /

  47. Data Analysis: Basic Concepts Topic 3 Density • Density is a ratio that compares the mass of an object to its volume. • The units for density are often grams per cubic centimeter (g/cm3). • You can calculate density using this equation:

  48. density • D=m/v • Density units always is g/cm3 • Mass is always in g • Volume is always in cm3 • If it is not you must convert • Note 1ml = 1cm3 ; 1 L = 1 dm3

  49. Density calculations • 1. Know the formula • 2. make sure your units are correct. • 3. plug the numbers provided in the problem into the formula and solve for x

  50. example • Calculate the density of an object that has a volume of 4.67 cm3,and a mass of 56.9 g • D = m • V • D= x • M= 56.9g • V= 4.67 cm3

More Related