1 / 42

COT 4600 Operating Systems Fall 2009

COT 4600 Operating Systems Fall 2009. Dan C. Marinescu Office: HEC 439 B Office hours: Tu-Th 3:00-4:00 PM. Lecture 27. Schedule Tuesday November 24 - Project phase 4 and HW 6 are due Tuesday December 1st -Research projects instead of final exam presentation

norman-patrick
Download Presentation

COT 4600 Operating Systems Fall 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. COT 4600 Operating Systems Fall 2009 Dan C. Marinescu Office: HEC 439 B Office hours: Tu-Th 3:00-4:00 PM

  2. Lecture 27 Schedule Tuesday November 24 - Project phase 4 and HW 6 are due Tuesday December 1st -Research projects instead of final exam presentation Thursday December 3rd - Class review Last time: More on Scheduling Network properties - (Chapter 7) - available online from the publisher of the textbook Layers Data Link Layer Today: Transport protocols; end-to-end problems Next Time: Project discussion 2 2 2 2 2

  3. Requirements of application level-processes. • The transport protocols are expected to: • Guarantee message delivery • Deliver messages in the same order they are sent • Deliver at most one copy of each message • Support arbitrarily large messages • Support synchronization between sender and receiver • Allow the receiver to apply flow control to the sender • Support multiple application processes on each host

  4. Best-effort networks • Services provided by best-effort networks • Drop messages • Re-order messages • Deliver duplicate copies of a given message • Limit messages to some finite size • Deliver messages after an arbitrarily long delay • Challenges develop algorithms that turn the less-than-desirable properties of the underlying network into the high level services required by application programs.

  5. UDP • Provides a process-to-process transport service. • Unreliable and unordered datagram service • No flow control • Multiplexing • Pseudo-header: fields from the IP header (1)+(2)+(3) • (1) protocol number • (2) source IP address • (3) destination IP address • UDP length field • UDP Checksum optional in IPv4 but mandatory in IPv6 • pseudo header + udp header + data

  6. UDP ports • Endpoints identified by ports. • servers run at well-known ports (e.g. Web server at port 80, Domain Server at port 53) • see /etc/services on Unix

  7. UDP header

  8. Reliable service - TCP • Connection-oriented • Byte-stream • sending process writes some number of bytes • TCP breaks into segments and sends via IP • receiving process reads some number of bytes • Full duplex • Flow control: keep sender from overrunning receiver • Congestion control: keep sender from overrunning network

  9. End-to-end issues • TCP is based on sliding window protocol used at data link level, but the situation is very different. • Potentially connects many different hosts need explicit connection establishment and termination • Potentially different RTT need adaptive timeout mechanism • Potentially long delay in network  need to be prepared for arrival of very old packets • Potentially different capacity at destination need to accommodate different amounts of buffering • Potentially different network capacity  need to be prepared for network congestion

  10. End-to-end issues (cont’d) • At a link level congestion is visible in the queue of packets at the sender. Network congestion much tougher to cope with, detect and then prevent. • TCP uses the sliding window algorithm on an end-to end basis to provide reliable/ordered delivery. • X.25 uses the sliding window protocol on a hop-by-hop basis. • A sequence of hop-by-hop guarantees does not add up to an end-to-end guarantee. • End-to-end argument: a function should not be provided at a lower levels of a system unless it can be completely and correctly implemented at that level. • Yet for performance optimization a function may be incompletely provided at a low level. E.g. error detection is provided on a hop by hop basis. Why send all the way a corrupted packet?

  11. Segment Format • Each connection identified with 4-tuple: • <SrcPort, SrcIPAddr, DstPort, DstIPAddr> • Sliding window + flow control • Acknowledgment, SequenceNum, AdvertisedWindow • Flags: SYN, FIN, RESET, PUSH, URG, ACK • Checksum: pseudo header + tcp header + data

  12. The state transition diagram of a TCP connection • Two types of events trigger a transition: • a segment arrives from the peer • the local application process invokes and operation on TCP Lecture 27

  13. Connection establishment and termination • Connection establishment is an asymmetric activity: • A server does a passive open. • A client does an active open • The two parties have to agree upon on a set of parameters the starting numbers the two sides plan to use for their respective byte streams. • Three-Way Handshake • Connection termination is symmetric, each side has to close the connection independently. One side can do a close, meaning that it can no longer send the data, but the other side may keep the other half of the connection open and continue sending data.

  14. Open a connection • The information exchanged during the three-way handshake • SN - initial sequence number the client wants to use • SN - initial sequence number the server wants to use • SYN  flag indicating a sequence number is sent • SYN+ACK  flags indicating a sequence number is sent and the next sequence number expected (ACK). • The three-ways handshake: • a client does an active open, sends a SYN and moves to SYN_SENT state. • when SYN arrives at server, the server moves to SYN_RECVD state and sends a segment with SYN+ACK flags on. • when the client receives the segment with SYN+ACK flags on it moves to ESTABLISHED state

  15. Lecture 27

  16. Close a connection • Three combinations of transitions to close a connection: • This side closes first: ESTABLISHED FIN_WAIT_1FIN_WAIT_2 TIME_WAITCLOSED • The other side closes first: ESTABLISHEDCLOSE_WAITLAST_ACKCLOSED • Both sides close at the same time: ESTABLISHEDFIN_WAIT_1CLOSINGTIME_WAITCLOSING • It takes twice the maximum life time of an IP datagram in the Internet ( 120 sec) to move from TIME_WAIT to CLOSED. Reason: the local side of the connection sent an ACK segment in response to a FIN segment but does not know if the ACK segment reached the other side. The other side may have retransmitted the FIN that might arrive late and be acted upon by a new reincarnation of the connection.

  17. Sliding-window revisited • Each byte has a sequence number. ACKs are cumulative • Sending side • LastByteAckedLastByteSent • LastByteSentLastByteWritten • bytes between LastByteAcked and LastByteWritten must be buffered • Receiving side • LastByteRead < NextByteExpected • bytes between LastByteReadand LastByteRcvd must be buffered

  18. Flow control • Sender buffer size: MaxSendBuffer • Receive buffer size: MaxRcvBuffer • Receiving side: • LastByteRcvd - NextByteReadMaxRcvBuffer • AdvertisedWindow = MaxRcvBuffer - (LastByteRcvd - NextByteRead)

  19. Flow control (cont’d) • Sending side NextByteExpectedLastByteRcvd + 1 LastByteSent - LastByteAckedAdvertisedWindow EffectiveWindow = AdvertisedWindow – (LastByteSent - LastByteAcked) LastByteWritten - LastByteAckedMaxSendBuffer • Block sender if (LastByteWritten - LastByteAcked) + y > MaxSendBuffer • Always send ACK in response to an arriving data segment • Persist when AdvertisedWindow=0

  20. Protecting against wraparound • A byte with a sequence number x may be sent at one time and then on the same connection a byte with the same sequence number x may be sent again. • Wrap Around: controlled by the 32-bit SequenceNum • The maximum lifteimeof an IP datagram is 120 sec thus we need to have a wraparound time at least 120 sec. • For slow links OK but no longer sufficient for optical networks. Bandwidth & Time Until Wrap Around Bandwidth T1 (1.5Mbps) Ethernet (10Mbps) T3 (45Mbps) FDDI (100Mbps) STS-3 (155Mbps) STS-12 (622Mbps) STS-24 (1.2Gbps) Time Until Wrap Around 6.4 hours 57 minutes 13 minutes 6 minutes 4 minutes 55 seconds 28 seconds

  21. Keeping the pipe full • The SequenceNum, the sequence number space (32 bits) should be twice as large as the window size (16 bits). It is. • The window size (the number of bytes in transit) is given by the AdvertisedWindowfield (16 bits). • The higher the bandwidth the larger the window size to keep the pipe full. • Essentially we regard the network as a storage system and the amount of data is equal to: ( bandwidth x delay )

  22. Required window size for a 100 msec RTT. Bandwidth T1 (1.5Mbps) Ethernet (10Mbps) T3 (45Mbps) FDDI (100Mbps) STS-3 (155Mbps) STS-12 (622Mbps) STS-24 (1.2Gbps) Delay x Bandwidth Product 18KB 122KB 549KB 1.2MB 1.8MB 7.4MB 14.8MB

  23. Adaptive retransmission –original algorithm • Measure SampleRTT for each segment/ACK pair • Compute weighted average of RTT • EstimatedRTT = axEstimatedRTT + bxSampleRTT • where a + b = 1 • a between 0.8 and 0.9 • b between 0.1 and 0.2 • Set timeout based on EstimatedRTT • TimeOut = 2 xEstimatedRTT

  24. Karn/Partridge algorithm • Do not sample RTT when retransmitting • Double timeout after each retransmission

  25. Jacobson/Karels algorithm • New calculation for average RTT Diff = SampleRTT - EstimatedRTT EstimatedRTT = EstimatedRTT + (dx) Deviation = Deviation + d(|Diff|- Deviation) • where d is a fraction between 0 and 1 • Consider variance when setting timeout value • TimeOut = m x EstimatedRTT + f x Deviation • where m = 1 and f = 4 • Notes • algorithm only as good as granularity of clock (500ms on Unix) • accurate timeout mechanism important to congestion control (later)

  26. Congestion control andresource allocation • Network resources: link bandwidth and router buffer space. • Global optimization problem - hence very hard. • Flow control versus congestion control (should be fair). • Network model: • a) Packet switched network. Congestion is often unavoidable.

  27. Congestion control and resource allocation • b) Connectionless Flows. Datagram (no state) | Virtual Circuit (hard state) |Flows (soft state) Flow à a sequence of packets between a source/destination pair following the same route through the network. Established explicitly or implicitly. Soft state à cannot explicitly be created and removed by signaling

  28. Congestion control and resource allocation • c) Underlying service model • best-effort (assume for now) • multiple qualities of service (later) • Taxonomy of resource allocation mechanisms: • (1) Router Centric/Host Centric • (2) Reservation Based / Feedback Based • (3) Window based / Rate Based

  29. Evaluation • fairness • power (ratio of throughput to delay) • Fairness criteria

  30. Queuing disciplines • First-In-First-Out (FIFO) with tail drop • does not discriminate between traffic sources • Priority Queuing • Fair Queuing (FQ) • explicitly segregates traffic based on flows, one queue per flow • ensures no flow captures more than its share of capacity • Weighted fair queuing (WFQ). How many bits to transmit each time the router servers a queue.

  31. Problem: packets not all the same length • really want bit-by-bit round robin • not feasible to interleave bits (schedule on packet basis) • simulate by determining when packet would finish • For a single flow • suppose clock ticks each time a bit is transmitted • let Pi denote the length of packet i • let Si denote the time when start to transmit packet i • let Fidenote the time when finish transmitting packet i • Fi= Si + Pi

  32. When does router start transmitting packet i • If before router finished packet i-1 from this flow, then immediately after last bit of i--1 (Fi-1) • If no current packets for this flow, then start transmitting when arrives (call this Ai) • Thus: Fi= MAX(Fi-1, Ai) + Pi • For multiple flows • calculate Fifor each packet that arrives on each flow • treat all Fi's as timestamps • next packet to transmit is one with lowest timestamp

  33. Not perfect: can't preempt the packet currently being transmitted • Example

  34. TCP congestion control • In late 1980’s Van Jacobson proposed to augment TCP with a congestion control mechanism. • Each source attempts to estimate how much capacity is available in the network. The source uses: • (a) the implicit feedback provided by the acknowledgments to determine when it is safe to insert a new packet into the network (self-clocking), and • (b) timeouts to detect congestion. • Three inter-related mechanisms: • Additive Increase/Multiplicative Decrease  new state variable a window that combines flow control and congestion control. • Slow Start  mechanism to allow a connection to achieve its window fast. • Fast Retransmit  a heuristic to deal with timeouts.

  35. Additive Increase/Multiplicative Decrease • Objective: adjust to changes in the available capacity • New state variable per connection that limits how much data source has in transit : CongestionWindow MaxWin = MIN(CongestionWindow, AdvertisedWindow) EffWin = MaxWin - (LastByteSent - LastByteAcked) • Idea: • increase CongestionWindow when congestion goes down • decrease CongestionWindow when congestion goes up • Question: how does the source determine whether or not the network is congested? • Answer: a timeout occurs • timeout signals that a packet was lost • packets are seldom lost due to transmission error • lost packet implies congestion

  36. Additive Increase/Multiplicative Decrease • Algorithm: • increment CongestionWindow by one packet per RTT (linear increase) • divide CongestionWindow by two whenever a timeout occurs (multiplicative decrease) • In practice: increment a little for each ACK. MSS – maximum segment size. • Increment = MSS * MSS/CongestionWindow) • CongestionWindow += Increment

  37. Packets in transit during additive increase with one packet being added each RTT • Example trace: saw-tooth behavior

  38. Slow start • Objective: determine the available capacity in the first place • It takes too long to ramp up a connection when starting from scratch. • Idea: double the number of packets TCP has in transit every RTT. • begin with CongestionWindow = 1 packet • double CongestionWindow each RTT (increment by 1 packet for each ACK) • Exponential growth, but slower than all in one blast. • Used... • when first starting connection • when connection goes dead waiting for a timeout

  39. Example trace Linear growth till about 0.4 sec. Then packets get lost and the window ramps up. A timeout occurs at 2 sec. Then the window size becomes about half of what it was before 17 kB versus 34, and increases linearly towards that value….. Why packets get lost: assume that the network would only support 20 packets from this source. When they get to the destination and ACKs are sent, the window size is doubled to 40. Obviously the other half is lost.

  40. Fast retransmit and fast recovery • Problem: coarse-grain TCP timeouts lead to idle periods • Fast retransmit: use duplicate ACKs to trigger retransmission

  41. Results • Fast recovery: remove the slow start phase; go directly to half the last successful CongestionWindow

  42. Congestion avoidance mechanisms • TCP's strategy • to control congestion once it happens • to repeatedly increase load in an effort to find the point at which congestion occurs, and then back off • Alternative strategy • predict when congestion is about to happen, and reduce the rate at which hosts send data just before packets start being discarded • we call this congestion avoidance, to distinguish it from congestion control • Two possibilities • router-centric: DECbit and RED Gateways • host-centric: TCP Vegas

More Related