1 / 62

Welding Symbols (ISO 2553) and Weld Joint Design

Welding Symbols (ISO 2553) and Weld Joint Design. ELEMENTARY WELD SYMBOLS. Square Groove Weld . Single V Groove Weld . ELEMENTARY WELD SYMBOLS. Single Bevel Groove Weld . Single V Groove Weld with Broad Root Face. ELEMENTARY WELD SYMBOLS. Single Bevel Groove Weld with Broad Root Face.

norton
Download Presentation

Welding Symbols (ISO 2553) and Weld Joint Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Welding Symbols (ISO 2553) and Weld Joint Design

    2. ELEMENTARY WELD SYMBOLS

    3. ELEMENTARY WELD SYMBOLS

    4. ELEMENTARY WELD SYMBOLS

    5. ELEMENTARY WELD SYMBOLS

    6. ELEMENTARY WELD SYMBOLS

    7. ELEMENTARY WELD SYMBOLS

    8. ELEMENTARY WELD SYMBOLS

    9. SUPPLEMENTARY SYMBOLS

    10. SUPPLEMENTARY SYMBOLS

    11. SUPPLEMENTARY SYMBOLS

    12. SUPPLEMENTARY SYMBOLS

    13. SUPPLEMENTARY SYMBOLS

    14. EXAMPLES OF APPLICATION

    15. EXAMPLES OF APPLICATION

    16. EXAMPLES OF APPLICATION

    17. EXAMPLES OF APPLICATION

    18. EXAMPLES OF APPLICATION

    19. EXAMPLES OF APPLICATION

    20. EXAMPLES OF APPLICATION

    21. EXAMPLES OF APPLICATION

    22. EXAMPLES OF APPLICATION

    23. EXAMPLES OF APPLICATION

    24. DIMENSIONING OF WELDS

    25. DIMENSIONING OF WELDS

    26. DIMENSIONING OF WELDS

    27. DIMENSIONING OF WELDS

    28. DIMENSIONING OF WELDS

    29. DIMENSIONING OF WELDS

    30. DIMENSIONING OF WELDS

    31. DIMENSIONING OF WELDS

    32. DIMENSIONING OF WELDS

    33. WELD JOINT DESIGN

    34. Edge Preparation - Need

    35. Edge Preparation Factors which influence choice of edge preparation - Thickness - Material - Welding process - Extent of penetration required - Welding distortion - Cost

    36. Basic Joint Types

    37. Basic Weld Types

    38. Applicable Welds for Butt joint

    39. Applicable Welds for Butt joint

    40. Applicable Welds for Tee joint

    41. Applicable Welds for Lap joint

    42. Applicable Welds for Corner Joint

    43. Applicable Welds for Edge Joint

    44. Butt joint

    45. Butt joint

    46. Weld Reinforcement

    47. Butt joint – Complete Joint penetration

    48. Butt joint – Complete Joint penetration

    49. Butt joint – Complete Joint penetration (welding from one side)

    50. Butt Joint – Double V groove

    51. Butt Joint – U groove

    52. Butt Joint – Bevel groove

    53. Butt Joint – J groove

    54. Tee Joint – Full strength joint

    55. Tee Joint – Full penetration joint

    56. Tee Joint

    57. Lap Joint

    58. Welding Position – Groove

    59. Welding Position – Groove

    60. Welding Position – Fillet

    61. Welding Position – Fillet

    62. Welding Positions – Groove

    63. Welding Positions – Fillet

More Related