Common Boiler Water Problems and Their Solutions!

1. Common Boiler Water Problems and Their Solutions! Most boiler issues begin with the water quality. Common boiler feed water issues with the condensate return water can cause severe damage to the unit and give rise to problems such as the build-up of solid deposits on the water side of the tube, water leaks, corrosion, larger than normal sludge build-up, foaming in the boiler tank and other boiler issues: Most Common Boiler Issues with the Water Quality Improperly balanced water is one of the major causes that develops various issues within the boiler unit. Poor- quality water can potentially cause damage to the components of a boiler. If you experience any equipment issues, it is best to find out the causes including problems with the water chemistry that demand attention and solutions to rebalance it. Below are the listed common boiler issues with water quality and their solutions: 1. Solid Deposits Build-up: Poor water quality can lead your system to malfunction or crash altogether. Minerals such as calcium or other minerals can be deposited in the boiler and pipes. These deposits are responsible for slowing down the passage of steam through the unit or blocking it completely. Solution: Hence, getting rid of these scale deposits will help get your boiler efficiency back to its maximum. 2. Water and Safety Probes Breaking from Scale Deposits: Probes submerged in water can also accumulate scale, much like pipes. This scale build-up on probes highlights the importance of treating tank water to prevent such issues. If probes cannot accurately measure water temperature or pressure, the boiler may shut off automatically. Failure of safety controls and sensors could also prevent the boiler from shutting off in hazardous situations, such as excessive pressure build-up. Regular inspections are essential to ensure the proper functioning of safety controls and maintain a safe working environment. Solution: Low water cut-off valves are crucial components that shut off the boiler if water levels drop too low. Your routine maintenance tasks should include testing the operation of these valves. Draining the tank briefly during testing helps remove sediment and assesses the system's performance, ensuring safety and efficient operation. 3. Corrosion: Most boiler problems arise from the inside of the system and gradually work their way out. It is often difficult to notice signs of corrosion until a pipe or tank leaks. Corrosion occurs due to the chemical reaction of the water within the boiler combined with the material of the pipes or tank. This situation happens due to some common factors such as too much dissolved oxygen in the boiler water, dissolved solids or improper pH levels. Solution: The boiler professional can help you with this problem by treating the boiler water and causing further damage. Preventing corrosion is a great way to protect your system from dangerous leaks. If you notice any of these boiler issues with the water quality or any other problem, N Price Ltd will be the ultimate choice. Contact us today to book your appointment for a Boiler Install in Brighton, boiler repair or service! For more information visti our web page - https://www.npriceltd.co.uk/boiler-installations/.