1 / 5

Automatic Single Sided Test Sequence of ELQ 30A

Automatic Single Sided Test Sequence of ELQ 30A. ELQ 30A provides single sided test sequences to estimate the data transfer capacity of the tested lines used for different xDSL systems without the aid of far end device or a second operator.

nyoko
Download Presentation

Automatic Single Sided Test Sequence of ELQ 30A

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Automatic Single Sided Test Sequence of ELQ 30A ELQ 30A provides single sided test sequences to estimate the data transfer capacity of the tested lines used for different xDSL systems without the aid of far end device or a second operator. Numerous test parameter sets are pre-programmed containing: ■Tolerance masks for Loss, LCL, Return Loss, Impedance measurement ■Principal system parameters for VDSL2, VDSL1, ADSL2 +, ADSL, ADSL G LITE READSL2, ADSL G LITE, ADSL G.LITE2, SHDSL, HDSL, ISDN systems. Using the pre-programmed test parameters ELQ 30A provides immediate PASS/FAIL qualification and detailed information about the reasons of failure. After selecting the cable type and xDSL system ELQ 30A launches an automatic test sequence performing unilateral measurements Selectable xDSL Systems Selectable Test Programs Results of the Automatic test To learn more click onthe selectedtopic! ELEKTR NIKA

  2. Selectable xDSL Systems ELEKTR NIKA

  3. Selectable Test Programs Short Program means measurement of: ■ Loss ■ Noise Notice: Loss and Noise measurements are mandatory for data transfer speed calculation Long Program means measurement of: ■ Loss ■ Noise ■ Return Loss ■ Impedance ■ Balance Free Program means: Any combination of measurements ELEKTR NIKA

  4. Detailed Results of VDSL and ADSL Qualification ELEKTR NIKA

  5. THANK YOU FOR YOUR ATTENTION!

More Related