1 / 41

WG302v2 WAG302v2

WG302v2 WAG302v2. ProSafe Wireless Access Points. Version 2. Software changes only, same hardware. Use same firmware image. During boot-up, software decide to boot up “AG” or “G” code. Changes from version 1. Added: Spectra link. Untagged VLAN support. Removed: Autocel.

octavious-puckett
Download Presentation

WG302v2 WAG302v2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WG302v2WAG302v2 ProSafe Wireless Access Points

  2. Version 2 • Software changes only, same hardware. • Use same firmware image. During boot-up, software decide to boot up “AG” or “G” code.

  3. Changes from version 1 • Added: • Spectra link. • Untagged VLAN support. • Removed: • Autocel

  4. Front Panel – WG302

  5. Rear Panel – WG302 • 1. Primary and secondary 2.4 GHz detachable antenna. • 2. Reset button. • 3. Serial console port. Use the male DB-9 serial port for serial DTE connection. • 4. RJ45 Ethernet LAN/POE port. • 5. Power socket. Use 1.2VDC 1.2A power adapter.

  6. Front Panel and LED – WAG302

  7. Rear Panel – WAG302 • 1. 5 Ghz detachable antenna. • 2. 2.4 GHz detachable antenna. • 3. Reset button. • 4. Serial console port. Use the male DB-9 serial port for serial DTE connection. • 5. RJ45 Ethernet LAN/POE port. • 6. Power socket. Use 1.2VDC 1.2A power adapter.

  8. General

  9. Basic Settings

  10. Wireless Settings 11a

  11. Wireless Settings 11b/g

  12. Security Profile Settings

  13. Security Profile ConfigurationAuthentication - Open

  14. Security Profile ConfigurationAuthentication - Shared

  15. Security Profile ConfigurationAuthentication – Legacy 802.1x A Radius server must be first configured in the Radius Server Settings page before this authentication method can be selected.

  16. Security Profile ConfigurationAuthentication – WPA with Radius A Radius server must be first configured in the Radius Server Settings page before this authentication method can be selected.

  17. Security Profile ConfigurationAuthentication – WPA2 with Radius A Radius server must be first configured in the Radius Server Settings page before this authentication method can be selected.

  18. Security Profile ConfigurationAuthentication – WPA & WPA2 with Radius A Radius server must be first configured in the Radius Server Settings page before this authentication method can be selected.

  19. Security Profile ConfigurationAuthentication – WPA-PSK

  20. Security Profile ConfigurationAuthentication – WPA2-PSK

  21. Security Profile ConfigurationAuthentication – WPA-PSK & WPA2-PSK

  22. Radius Server Settings

  23. Access Control ACL using Radius database is currently not supported.

  24. Change Password

  25. Remote Management

  26. Upgrade Firmware

  27. Backup / Restore Settings

  28. Reboot AP

  29. Activity Log

  30. Available Wireless Station List

  31. Statistics

  32. Rogue AP Detection 11a

  33. Rogue AP Detection 11b/g

  34. Advanced IP Settings

  35. Hotspot Settings * DHCP server must be enabled for Hotspot feature to work.

  36. Advanced Wireless Settings 11a

  37. Advanced Wireless Settings 11b/g

  38. Advanced Access Point SettingsWireless bridging and repeating Note the MAC address

  39. Advanced Access Point Settings 11b/gWireless bridging and repeating Note the MAC address

  40. FAQ • 1. Why v2? • In effort to consolidate number of vendors, the wg302 and wag302 are now manufactured by a different vendor of Netgear. • 2. What about support of v1? • We have continuing support agreement with the original vendor of v1. Bugs will still be fixed but no new feature will be added to v1. • 3. What are the differences between v1 and v2? • Feature: same features between v1 and v2. V2 added support of Spectra link and untagged VLAN. • Firmware: now both wag302 and wg302 will use the same firmware image. When the access point boot up, it will detect the unit’s model and bring up the correct code. • 4. What about AutoCell? • We have removed AutoCell from wg302 and wag302. We are only supporting AutoCell on wg102.

  41. Known issues • At initial release: • Throughput of v2 is below v1 (Fixed by v5.0.48). • Does not support Day light saving time. (Added in v5.0.48). • Does not support ACL using RADIUS (Added in v5.0.48). • DHCP server must be enabled for Hotspot feature to work. • WDS throughput is slower than v1 (To be fixed).

More Related