1 / 17

Temperature and Pressure Conversions for Liquids: Calculator Reference Table Review

Get a calculator reference table now to review temperature and pressure conversions for phase class 3 liquids. Convert temperatures from Celsius to Kelvin, convert pressure from atm to mm Hg and kPa.

octavious
Download Presentation

Temperature and Pressure Conversions for Liquids: Calculator Reference Table Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Phase Class #3 – Liquidsget a calculator + reference table now Review temperature and pressure conversions, Table H and vapor pressure.

  2. Convert these 4 now… 120⁰C into Kelvin 327 Kelvin to centigrade 0.556 atm to mm Hg 4.57 atm to kPa

  3. Convert 120⁰C into Kelvin 327 Kelvin to centigrade 0.556 atm to mm Hg 4.57 atm to kPa K = C + 273 K = 120 + 273 = 393 Kelvin K = C + 273 327 K = C + 273 327 K = 54⁰C 0.556 atm1 760 mm Hg1.0 atm X = 423 mm Hg 4.57 atm1 101.3 kPa1.0 atm X = 463 kPa

  4. Liquids are substances with particles sliding on each other, attached loosely by inter particle attractions. The particles do not have enough kinetic energy (motion) to shake apart into a gas, nor so little energy that they would lock together into a solid.

  5. When liquids get enough energy they reach the boiling point. At the boiling point ALL molecules of a liquid have enough energy to go into the gas phase. This is called vaporization. Also vaporization is evaporation, which is when few particles of a liquid get enough energy by bouncing around to escape to the gas phase. Evaporation happens to every liquid at every temperature. The hotter it is, the more evaporation can occur since more particles get enough energy. See the water evaporating from the lake? On every day, no matter what the temperature, all day long, at least some water evaporates.

  6. Phase change from liquid to gas… Evaporation is when some water molecules (any liquid) escape because individually they get enough kinetic energy to jump into the air. Boiling is when the entire liquid has enough kinetic energy to change phase. GAS When kinetic energy exceeds the forces of attraction, liquids become gases. This is an OPEN SYSTEM, the beaker will eventually empty. f this liquid is boiling it’s quicker, if it’s cool, then the process is slower. LIQUID

  7. In Vestal we have a normal air pressure, our altitude is about 1000 feet above sea level. In Boulder, they’re nearly 5,400 feet above sea level, so their air pressure is markedly lower. If the pressure is normal here, it’s about 85% lower there. Vestal 1.0 atm Boulder 0.85 atm. What temperature will that water boil in Boulder? Donna lives high up in the Rockies, in Boulder Colorado. She does like to cook, but things are not like they are here. First of all she does not shop at a mall.

  8. Air Pressure Air Pressure Air Pressure water water water

  9. Boiling Point Liquids (even water) boil when all the particles have enough energy to overcome the internal attraction that they have for themselves, andenough energy to overcome the air pressure pushing down upon the surface. Boiling point is not JUST temperature driven, it’s controlled by the temperature and the pressure together. High pressures will increase the energy (temperature) required to boil any liquid. Lower pressures will decrease the energy needed to boil a liquid. The internal attraction of the particles is a constant for each particular liquid. This internal attraction is measured by VAPOR PRESSURE.

  10. In a closed system, at a steady temperature a dynamic equilibrium is reached. This is when the evaporation rate equals the condensation rate. This is only possible in a closed system. Corked top Condensation (down arrows) Evaporation (up arrows) WATER

  11. In a closed system, at a steady temperature a dynamic equilibrium is reached. This is when the evaporation rate equals the condensation rate. This is only possible in a closed system. Corked top If the system is heated, more evaporation occurs, until a new dynamic equilibrium is reached. If it’s cooled, less evaporation will occur, until a new dynamic equilibrium is reached. Condensation (down arrows) WATER Evaporation (up arrows)

  12. This space above the water contains air, and has air pressure that matches the air pressure outside the glass. The evaporation causes more particles of gas to move into that space, increasing the pressure. This extra pressure is called VAPOR PRESSURE. Corked top Condensation (down arrows) WATER Evaporation (up arrows)

  13. twelve plus one

  14. The vapor pressure of water (part of table H) 101.3 kPa Pressure kPa 0 50 100 temperature, Centigrade degrees

  15. The vapor pressure of water (part of table H) Big black dot indicates the “normal boiling point”, the BP at normal pressure. 101.3 kPa The curved line indicates ALL of the boiling points of water, at all different pressures. Pressure kPa 0 50 100 temperature, Centigrade degrees

  16. The vapor pressure of water (part of table H) H2O at these pressures and temperatures is a LIQUID 101.3 kPa H2O at these pressures and temperatures is a GAS Pressure kPa 0 50 100 temperature, Centigrade degrees

  17. Table H is the vapor pressure of 4 different compounds, water included. Only look at one curve, or one liquid, at any time. Behind the curve is liquid. In front is a gas.

More Related