1 / 11

SIMCom DSDS Solution Introduction The global leading provider of M2M wireless module

SIMCom DSDS Solution Introduction The global leading provider of M2M wireless module. September, 2012. DSDS Overview. DSDS = Dual SIM Dual Standby Single modem (1BB / 1RF ) managing 2 SIMs Idle Services on both SIM in parallel (paging reception, reselection..)

odin
Download Presentation

SIMCom DSDS Solution Introduction The global leading provider of M2M wireless module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SIMCom DSDS Solution Introduction The global leading provider of M2M wireless module September, 2012

  2. DSDS Overview • DSDS = Dual SIM Dual Standby • Single modem (1BB / 1RF ) managing 2 SIMs • Idle Services on both SIM in parallel (paging reception, reselection..) • Cell selection/reselection on the 2 SIMs • Paging monitoring on 2 SIMs • Ability of doing CS/PS call on any of the 2 SIMs • BUT only 1 connection (CS/PS) at a time AND no activity on other SIM possible (neither idle nor connected) • When 1 SIM enters CS/PS call => no activity on other SIMs • MT call on second SIM not possible • MO call on second SIM not possible (ie double call feature not possible) • To sum up => Dual SIM, Dual Standby but Single Call

  3. Hardware Overview • Only 2 SIM connectors are required

  4. Software Architecture Overview

  5. Software Architecture Overview • Single L1 managing services for both HL stack • protocol stack duplicated • New module creation for Hw SIM swap management —DSCV • Suspend-Resume mechanism in case of concurrent procedure —DSUAL

  6. AT Interface • AT*PSSDS (Select default SIM) • Set SIM_x into Default SIM • Clarification: If there are 2 SIMs, then the SIM1 is identified by value 1 and SIM2 is identified by value 2. If there is one SIM then default SIM is the only SIM present

  7. Use Cases • Outgoing call on Default SIM: No Change • By default, usual AT commands are routed to default SIM

  8. Use Cases • Outgoing call on Non Default SIM • Non Default SIM selection is needed before each command

  9. Use Cases • Incoming call on Non-Default SIM

  10. Usage Summary • No extra Hardware Circuit • Simple AT command to change default SIM card • SIM URCs on the non-default SIM are appended with “DS” to indicate TE that this URC is from the non-default SIM • Incoming call notification from Default SIM: RING • Incoming call notification from Non Default SIM: RINGDS

  11. Thank you!

More Related