1 / 4

Cable for UPAMD

Cable for UPAMD. Steve Sedio Foxconn 8/02/2011. Requirements: Power, 25 milliohms max AWG selected by worst case resistance and operation at 50C Signal Option #1, Single ended – 50 – 60 ohms Option #2, Balanced – 100 – 120 ohms Data rate frequency, 500KHz

oleg
Download Presentation

Cable for UPAMD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cable for UPAMD Steve Sedio Foxconn 8/02/2011

  2. Requirements: • Power, 25 milliohms max • AWG selected by worst case resistance and operation at 50C • Signal • Option #1, Single ended – 50 – 60 ohms • Option #2, Balanced – 100 – 120 ohms • Data rate frequency, 500KHz • Power - is also RF ground (no separate ground). Drain wires would tie to power – in the plug. • Waiting for capacitance / inductance

  3. Foxconn RecommendationSingle Ended Signal, Shield Made from Spiral (Power+ and Power -) Single Ended Signal Wire Insulation Inner Jacket Power + Power - & AC Ground Outer Jacket

  4. Add - Foxconn RecommendationBalanced Signal, Shield Made from Spiral (Power+ and Power -) Wire Insulation Balanced Signal pair Power + Inner Jacket Power - & AC Ground Outer Jacket

More Related