1 / 9

VACUUM BAG REPLACEMENT

VACUUM BAG REPLACEMENT. 2 AFTER REMOVING THE BAG FROM THE BOX BE SURE TO PUSH THE PAPER BLOCKING THE HOLE OUT OF THE WAY. 1 USE FILTRETE 3M VACUUM BAG “Y&Z” NUMBER 64702A. VACUUM BAG REPLACEMENT MACHINES WITHOUT HANGER ASSEMBLY. 3 REMOVE THE EXISTING BAG.

oliver-gill
Download Presentation

VACUUM BAG REPLACEMENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. VACUUM BAG REPLACEMENT 2 AFTER REMOVING THE BAG FROM THE BOX BE SURE TO PUSH THE PAPER BLOCKING THE HOLE OUT OF THE WAY. 1 USE FILTRETE 3M VACUUM BAG “Y&Z” NUMBER 64702A

  2. VACUUM BAG REPLACEMENTMACHINES WITHOUT HANGER ASSEMBLY 3 REMOVE THE EXISTING BAG

  3. VACUUM BAG REPLACEMENTMACHINES WITHOUT HANGER ASSEMBLY 4 ORIENT THE NEW BAG AS SHOWN 5 INSERT THE BOTTOM OF THE CARDBOARD INTO THE SLOT PROVIDED. 6 PRESS THE CARDBOARD OPENING OVER THE TUBE 7 AFTER THE CARDBOARD IS SNUG ROTATE THE CLAMP SECURING THE BAG.

  4. VACUUM BAG REPLACEMENT MACHINES WITHOUT HANGER ASSEMBLY 8 FINAL POSITION AFTER INSTALLATION

  5. VACUUM BAG REPLACEMENTMACHINES WITH HANGER ASSEMBLY 9 REMOVE THE EXISTING BAG

  6. VACUUM BAG REPLACEMENTMACHINES WITH HANGER ASSEMBLY 10 LIFT THE FINGER TAB SO THE TUBE CLEARS THE OPENING 11 PLACE THE BAG IN THE OPENING IN THE ORIENTATION AS SHOWN

  7. VACUUM BAG REPLACEMENTMACHINES WITH HANGER ASSEMBLY 12 START THE CARDBOARD INTO THE GROOVES 13 CONTINUE SLIDING THE CARDBOARD 14 WHEN THE HOLE IN THE CARDBOARD AND THE HOLE IN THE PLASTIC MOUNT ARE ALIGNED STOP SLIDING. 15 RELEASE THE FINGER TAB AND CLOSE THE ASSEMBLY

  8. VACUUM BAG REPLACEMENT MACHINES WITH HANGER ASSEMBLY 17 FINAL POSITION AFTER INSTALLATION 16 TURN THE KNOB AND LOCK THE ASSEMBLY

  9. VACUUM BAG REPLACEMENTMACHINES WITH HANGER ASSEMBLY 18 THIS IS NOT CORRECT….THE CARDBOARD HOLE AND THE PLASTIC MOUNT HOLE ARE NOT ALIGNED 19 THIS IS CORRECT…. THE CARDBOARD HOLE AND THE PLASTIC MOUNT HOLE ARE ALIGNES 20 THIS IS A VIEW WITH THE PAPER VACUUM BAG REMOVED….THE CARDBOARD MAY NEED TO BE PRESSED TO GET A TIGHT FIT

More Related