Introduction to Production and Resource Use

1. Introduction toProduction and Resource Use Chapter 6

2. Topics of Discussion • Conditions of perfect competition • Classification of inputs • Important production relationships (assume one variable input in this chapter) • Assessing short run business costs • Economics of short run decisions

3. Conditions for Perfect Competition • Homogeneous products • No barriers to entry or exit • Large number of sellers • Perfect information Page 109

4. Classification of Inputs • Land: includes renewable (forests) and non-renewable (minerals) resources • Labor: all owner and hired labor services, excluding management • Capital: manufactured goods such as fuel, chemicals, tractors and buildings • Management: production decisions designed to achieve specific economic goal Page 110

5. Production Function Output = f(labor|capital, land, and management) Start with one variable input Page 112

6. Production Function Output = f(labor|capital, land, and management) Start with one variable input assume all other inputs fixed at their current levels… Page 112

7. Coordinates of input and output on the TPP curve Page 112

8. Total Physical Product (TPP) Curve Variable input Page 113

9. Law of DiminishingMarginal Returns “As successive units of a variable input are added to a production process with the other inputs held constant, the marginal physical product (MPP) eventually declines” Page 113

10. Other Physical Relationships The following derivations of the TPP curve play An important role in decision-making: Marginal Physical =  Output ÷  Input Product Pages 114-115

11. Other Physical Relationships The following derivations of the TPP curve play An important role in decision-making: Marginal Physical =  Output ÷  Input Product Average Physical = Output ÷ Input Product Pages 114-115

12. Change in output as you increase inputs Page 112

13. Total Physical Product (TPP) Curve Marginal physical product is .45 as labor is increased from 16 to 20 output input Page 113

14. Output per unit input use Page 112

15. Total Physical Product (TPP) Curve Average physical product is .31 if labor use is 26 output input Page 113

16. Plotting the MPP curve Change in output associated with a change in inputs Page 114

17. Marginal Physcial Product Change from point A to point B on the production function is an MPP of 0.33 Page 114

18. Plotting the APP Curve Level of output divided by the level of input use Page 114

19. Average Physical Product Output divided by labor use is equal to 0.19 Page 114

20. Three Stages of Production Average physical product (yield) is increasing in Stage I Page 114

21. Three Stages of Production Marginal physical product falls below the average physical product in Stage II Page 114

22. Three Stages of Production MPP goes negative as shown on Page 112… Page 114

23. Three Stages of Production Why are Stage I and Stage III irrational? Page 114

24. Three Stages of Production Output falling Productivity rising so why stop??? Page 114

25. Three Stages of Production The question therefore is where should I operate in Stage II? Page 114

26. Economic Dimension • We need to account for the price of the product • We also need to account for the cost of the inputs

27. Key Cost Relationships The following cost derivations play a key role in decision-making: Marginal cost =  total cost ÷  output Page 117-120

28. Key Cost Relationships The following cost derivations play a key role in decision-making: Marginal cost =  total cost ÷  output Average variable = total variable cost ÷ output cost Page 117-120

29. Key Cost Relationships The following cost derivations play a key role in decision-making: Marginal cost =  total cost ÷  output Average variable = total variable cost ÷ output cost Average total = total cost ÷ output cost Page 117-120

30. From TPP curve on page 113 Page 118

31. Fixed costs are $100 no matter the level of production Page 118

32. Column (2) divided by column (1) Page 118

33. Costs that vary with level of production Page 118

34. Column (4) divided by column (1) Page 118

35. Column (2) plus column (4) Page 118

36. Change in column (6) associated with a change in column (1) Page 118

37. Column (6) divided by column (1) or Page 118

38. or column (3) plus column (5) Page 118

39. Let’s graph the cost series in this table

40. Plotted cost relationships from table 6.3 on page 118 Plotting costs for levels of output Page 119

41. Now let’s assume this firm can sell its product for $45/unit

42. Key Revenue Concepts Notice the price in column (2) is identical to marginal revenue in column (7). What about average revenue, or AR? What do you see if you divide total revenue in column (3) by output in column (1)? Yes, $45. Thus, P = MR = AR under perfect competition. Page 122

43. Let’s see this in graphical form

44. $45 P=MR=AR Profit maximizing level of output, where MR=MC 11.2 Page 123

45. Average Profit = $17, or AR – ATC P=MR=AR $45-$28 $28 Page 123

46. Grey area represents total economic profit if the price is $45… P=MR=AR 11.2  ($45 - $28) = $190.40 Page 123

47. P=MR=AR Zero economic profit if price falls to PBE. Firm would only produce output OBE . AR-ATC=0 Page 123

48. P=MR=AR Economic losses if price falls to PSD. Firm would shut down below output OSD Page 123

49. Where is the firm’s supply curve? P=MR=AR Page 123

50. Marginal cost curve above AVC curve? P=MR=AR Page 123