1 / 20

GT1020 – Useful information

GT1020 – Useful information. GT1020. 512kB project memory. GT1020 is supported by GT Designer2 Version 2.43V and later. GT1020. Connecting to System Q. GT1020. Connecting to System Q. GT1020. Connecting to ACPU and QnACPU. GT1020. Connecting to FX-series (1). *1. GT1020.

oni
Download Presentation

GT1020 – Useful information

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GT1020 – Useful information

  2. GT1020 512kB project memory GT1020 is supported by GT Designer2 Version 2.43V and later.

  3. GT1020 Connecting to System Q

  4. GT1020 Connecting to System Q

  5. GT1020 Connecting to ACPU and QnACPU

  6. GT1020 Connecting to FX-series (1) *1

  7. GT1020 Connecting to FX-series (2) FX3U

  8. GT1020 Connecting to FX-series (3) FX3U

  9. GT1020 Connecting to FX-series (4) FX3U

  10. GT1020 Cable diagrams: RS422 cable 1

  11. GT1020 Cable diagrams: RS422 cable 2

  12. GT1020 Cable diagrams: RS232 cable 3

  13. GT1020 Cable diagrams: RS232 cable 4

  14. GT1020 Cable diagrams: RS232 cable 5

  15. GT1020 RS232/USB conversion adapter GT1020-RS2TUSB-5S GT1020-RS2TUSB-5S RS-232/USB conversion adaptor is an adaptor that converts the RS-232 interface for communication with PC on the GOT to the USB interface. It is used with a GT09-C30USB-5P USB cable. The use of a GT1020-RS2TUSB-5S RS-232/USB conversion adaptor requires an installation of the USB driver that is supplied with the package.

  16. GT1020 RS232/USB conversion adapter After installation of the driver a COM port isreserved for the adapter

  17. GT1020 Communication driver GT1020 is factory-installed with the driver for MELSEC-FX. An installation of the communication driver is required when connected to a controller other than a MELSEC-FX. When installing communication driver onto the GOT, power on the GOT in the OS transmission mode.

  18. GT1020 Communication driver Transfer Standard monitor OS and desired Communication driver to GOT

  19. GT1020 Setting of 3 Colours Backlight

  20. GT1020 Setting of 3 Colours Backlight In GT 1020 direct addressing of bits in a word (i.e. GD201.b14) is not possible, therefore the backlight colour has to be controlled in the PLC.

More Related