580 likes | 740 Views
Distribution. ED01. English. Code : STM#120. OfficeServ 7200 Hardware Description. Samsung Electronics Co., Ltd. Contents. Cabinet and Power Supply. Processor Modules. Voice Trunk Modules. Subscriber Stations. Data Modules. Terminals. Cabinet and Power Supply. Cabinet Configuration.
E N D
Distribution ED01 English Code : STM#120 OfficeServ 7200 Hardware Description Samsung Electronics Co., Ltd.
Contents Cabinet and Power Supply Processor Modules Voice Trunk Modules Subscriber Stations Data Modules Terminals
Cabinet Configuration Expansion Cabinet LCP only 8TRK,DLI,SLI,HYB WLI,MGI,WIM,4DSL 8TRK,DLI,SLI,HYB WLI,MGI,LIM,4DSL 8TRK,DLI,SLI,HYB,LIM TEPRI,WLI,MGI,4DSL 8TRK,DLI,SLI,HYB,LIM WLI,MGI,4DSL 8TRK,DLI,SLI,HYB,LIM WLI,MGI,4DSL MCP only 8TRK,DLI,SLI,HYB WLI,MGI,WIM,4DSL 8TRK,DLI,SLI,HYB WLI,MGI,LIM,4DSL 8TRK,DLI,SLI,HYB,LIM TEPRI,WLI,MGI,4DSL 8TRK,DLI,SLI,HYB,LIM TEPRI,WLI,MGI,4DSL 8TRK,DLI,SLI,HYB,LIM TEPRI,WLI,MGI,4DSL Access Cabinet
continue
PSU (Power Supply Unit) • Features • 1 PSU per chassis • Mounted on back plane • Supports 80 devices per chassis • Power is controlled by a thermal sensor • After 24hrs of cooling fan failure, PSU will stop!
MFM RCM MIS MCP (Main Control Unit) • Features • Installed in slot 0 of main chassis • 256 time slot switch matrix • 1x smart media card slot • 3x daughter module positions • Memory backup switch • 8 position DIP switch • 1x internal MOH source • MFM : Multi-Frequency Module • RCM/RCM2 : R2 CID Module • MIS : Miscellaneous
continue • Capacity without Option board • Capacity with Option board
continue • Sets DIP switch S2 S3 CHARGE Off
continue • Front View
Daughter boards for MCP • MFM (Multi-Frequency Module) • Installed in any position on MCP module • Only 1 per system • 12 DSPs for DTMF and tone detection
continue • RCM (R2 CID Module) • Installed on MCP module • Only 1 per system • RCM1 • R2 signalling send (30 channels) and receive (8 channels) or CID detection (14 channels) by DIP switch on RCM. • RCM2 • R2 signalling send ( channels) and receive (8 channels) or CID detection (14 channels) by DIP switch on RCM.
continue • MISC (Miscellaneous) • Installed on MCP • Only 1 per system • 2x external MOH • 1x external page • 1x loud bell • 1x common bell • 1x dry contact
Dry contact #1 (For common bell) Dry contact #2 (For external page) Dry contact #3 (For external page) External Page Equipment Additional Page Equipment MISC 2 MISC 1 continue
LCP (Local Control Processor) • Features • Installed in slot 0 expansion chassis • 3x link cable RJ45 ports, for connection to MCP • 2x status LEDs
continue • Front View
Voice Trunk Module (TEPRI) • Features • Same as OS500 operation. • Only installed in slots 3 – 5 of Access cabinet or slot 3 of Expansion cabinet. • T1/E1 signals by programming. • Resistor Terminations for T1 line(100 W) and E1 line(120 W). • 8 position DIP switch.
continue • DIP switch Setting
SYNC ASI IPC TP1 RST LOS L2 CLK TP2 SIO T1/E1/PRI TEPRI continue • Front View
Voice Trunk Module (8TRK) • Features • 8 trunk loop start module • 8 caller ID path support • Performs Polarity Reverse Sensing (PRS), (Option) • Performs Metering Pulse Detection (MPD), (Option)
P1-P8 Port (RJ-45) (RJ-45) continue • Pin Assignment
P1 P2 P3 P4 P1 P2 P3 P4 P5 P6 P7 P8 P5 P6 P7 P8 8TRK continue • Front View
Voice Trunk Module (4BRI) • Features • 8 ISND2 channels • Slots 1 – 5 of any cabinet • Max 10 cards – 80 channels
P1-T P2-T P3-T P4-T RUN ACT P1-S P2-S P3-S P4-S 4BRI continue • Front View
MGI (Media Gateway Interface) • Features • MGI2 – carrier module has NO MGI channels • MGI2 daughter modules added to provide 4 – 16 channels. • Installed in any subscriber slot. • G.729,G.723.G.726.G.711
Option1 MGI2D Option2 MGI2D Option3 MGI2D Option4 MGI2D continue • Option board • Option board provide 4 channels.
Analog Station (8/16SLI) • Features • SLI (Subscriber Line Interface) • Functions • Ring generation • DTMF/Dial pulse detection • Hook on/off detection • Tone generation • Board types • 8 SLI : 8 SLI ports • 16 SLI : 16 SLI ports • 16 MWSLI : 16 SLI with message wait • Power fail transfer relays
P1/P9 P2/P10 P3/P111 P4/P12 P1 P9 P2 P10 P3 P11 P4 P12 P5 P13 P6 P14 P7 P15 P8 P16 P1 P2 P3 P4 P5/P13 P6/P14 P7/P15 P8/P16 P1 P2 P3 P4 16SLI P5 P6 P7 P8 P5 P6 P7 P8 8SLI continue • Front View
continue • Pin Assignment P1 port Ports from P2 to P8
Digital Station (8/16DLI) • Features • DLI (Digital Line Interface) • Types • 8 DLI : 8 DLI ports 2B+D • 16 DLI : 16 DLI ports 1B+D • Max 8 large display phones per module
P1 P2 P3 P4 P1/P9 P2/P10 P3/P11 P4/P12 P1 P9 P2 P10 P3 P11 P4 P12 P1 P2 P3 P4 P5 P6 P7 P8 P5 P13 P6 P14 P7 P15 P8 P16 P5 P6 P7 P8 P5/P13 P6/P14 P7/P15 P8/P16 8DLI 16DLI continue • Front View
continue • Pin Assignment
Hybrid Station (8HYB/8Combo) • Features • Ring generation • DTMF/Dial pulse detection • Hook on/off detection • Tone generation • Specifications • 8 SLI ports • 8 DLI ports
P1/P9 P2/P10 P3/P11 P4/P12 P1 P9 P2 P10 P3 P11 P4 P12 P5 P13 P6 P14 P7 P15 P8 P16 P5/P13 P6/P14 P7/P15 P8/P16 8HYB continue • Front View
continue • Pin Assignment
Voice Mail System (SVMi-20E) • Features • Same position rules as station modules • Default card has 4 ports • Scalable to 20 ports? • Modem daughter card (and yes, it works!)
VM1 VM2 VM3 HDD LRT SDN PGD LAT RST LAN SIO SVMi-20E continue • Front View
Router Module (WIM) • Features • WIM : WAN Interface Module • Functions • Only 1 per system • Only installed in slot 1 of main chassis • 1x LAN port • 2x WAN ports (RJ45) • 1x WAN port (V.35 serial) • 1x DMZ • SIO for configuration • WIMD – daughter board for VPN
DMZ LAN LAN RUN DMZ SERIAL SERIALL • WAN1 WAN2 RST • WAN1 • WAN2 SIO WIM continue • Front View
continue • WIM to LIM connection • The Method of LAN port connection • Managed LIM : Slot2 LIM with WIM • Unmanaged LIM : Slot 3,4,5 • Using the Ethernet port of the front panel, • Through back panel, connect with the LIM board of slot 2.
Switch Module (LIM/PLIM) • LIM : LAN Interface Module • Features • Installed in slots 2 ~ 5 of any chassis • Max 8 per system (128 ports) • When in slot 2 of main chassis it’s a managed switch • If in any other slot it’s unmanaged • 16x 10/100 base T Ethernet ports • PLIM provides the Power over Ethernet (PoE) function • Functions • Detects 10/100 BASE-T, or full/half duplex automatically. • Offers the VLAN for supporting QoS. • Functions as a switching hub.
P1 P2 P3 P4 P9 P10 P11 P12 P5 P6 P7 P8 P13 P14 P15 P16 LIM continue • Front View
Voice Application Module (4WLI) • WLI : Wireless Line Interface • Features • Functions • Voice decompression: G.711, G.729 • Wireless specification: 802.11b WLAN • Specifications • Up to four APs. • Simultaneous calling through up to four channels per AP. • The maximum number of mobile station subscribers is 120.
P1 P2 P3 P4 RUN SW1 SW2 SW3 SIO 4WLI continue • Front View