1 / 13

“To NAT or Not?”

“To NAT or Not?”. Kent Reuber ( reuber@stanford.edu ) 725-8092. Outline. What is NAT? Why would you want to use NAT? How NAT works How NAT firewalling works Things that don’t work with NAT Considerations when deploying NAT Q&A. What is NAT?. NAT = “Net Address Translation”

ordell
Download Presentation

“To NAT or Not?”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. “To NAT or Not?” Kent Reuber (reuber@stanford.edu) 725-8092

  2. Outline • What is NAT? • Why would you want to use NAT? • How NAT works • How NAT firewalling works • Things that don’t work with NAT • Considerations when deploying NAT • Q&A

  3. What is NAT? • NAT = “Net Address Translation” • Several different methods (“one-to-one”, “many-to-one”. For the gory details, see RFC 1613 • Most frequently encountered method is the one used in home broadband routers which “hide” an entire non-routable network range behind a single routable “public” IP address. • Ref: Bill Dutcher: “The NAT Handbook” (Wiley)

  4. Why would you want to use NAT? • Allows you to buy a single IP address from your ISP and share that address among a large number of devices. (May save $$) • All devices on the local network can access the outside net (usually the Internet) at the same time, though the bandwidth is shared. • Firewall: Outside hosts can *reply* to hosts behind the NAT router, but the inside hosts have to initiate the session. (Note: there are some ways around this.)

  5. NAT router setup • NAT routers are given two IP’s addresses: • 1 non-routable (LAN -- you) • 1 routable (WAN – ISP) • Machines on LAN side get special non-routable addresses (usually 10.*.*.* or 192.168.*.*). • No IP addresses in these ranges are routed on the Internet.

  6. How NAT works • Normal routers maintain source and destination IP addresses from end-to-end • NAT routers change IP addresses and port • Outgoing packets appear to come from the NAT router’s public address. • NAT routers keep track of each “flow” so that replies can be returned. (Destination address changed)

  7. How NAT firewalling works • Suppose a host (either friendly or malicious sends a packet to the NAT router without the connection being initiated from the inside). Remember, it can’t send directly to the hosts on the other side -- they have non-routable addresses! • Since there is no entry in the flow table, the NAT router has no idea where to forward it and drops the packet. Instant firewall!

  8. Circumventing the NAT firewall (if you must) • You may want to run a server behind your NAT router. How do you let in some traffic? • NAT routers have a limited ability to “port forward”, sending all traffic to a given computer on the internal net and bypassing the flow table. • For example: • Send all Web traffic (port 80) to 192.168.1.3 • Send all mail traffic (port 25) to 192.168.1.5 • You can get hacked if forwarded port is vulnerable! For example, if your IIS Web server isn’t patched, your firewall won’t help you. Always keep services with open ports patched.

  9. What doesn’t work through a NAT router • It’s best to think of NAT routers as “one way mirrors”. • You can see out but people can’t see in. • Protocols that break are usually servers or protocols that are sensitive to tampering: • X Windows: Use “ssh +X” from the client side (behind the router) to set up your session. • Many VPN’s won’t allow connections through NAT. NAT packet rewriting looks like tampering. Stanford VPN can use UDP which circumvents this limitation. Other company VPN’s may not.

  10. Considerations: Should You Use NAT? • It’s your only choice if you get 1 address from your ISP and you want to create a network. • For Stanford West and Welch Rd. Apts., you can get multiple IP addresses, so that you don’t necessarily need one. • Firewall features may be appealing, but you may still want a publicly accessible machine. • May want to put one or more hosts on the public side of the NAT (e.g., file server). • You should keep most private information (e.g., bank accounts) on the private side.

  11. Example home network: Mixed public/NAT setup

  12. Can/Should you use NAT routers on campus? • Usually done for a small group/lab, not an entire department. Use with caution. You may want to talk to Networking first. • You must not send DHCP replies on WAN Ethernet side as this will disrupt other users. Disrupting network access is a great way to get disconnected! • If a host behind your NAT is compromised (e.g., from being hacked while off-site), and attacks some host, we are legally obligated to shut it down the host where the attack originates. • The only visible address that we can disable is your NAT router. • This will take down your whole private net!

  13. Q&A

More Related