1 / 34

Alphabet Of Lines

Alphabet Of Lines. Chapter 4. Introduction to the Alphabet of Lines. The use of line types on a drawing are used to describe the various features of an object to the person reading the print In order to understand what the drafter is trying to get across

oren-ballard
Download Presentation

Alphabet Of Lines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Alphabet Of Lines Chapter 4

  2. Introduction to the Alphabet of Lines • The use of line types on a drawing • are used to describe the various features of an object • to the person reading the print • In order to understand what the drafter is trying to get across • you must be able to understand the symbols and lines s/he uses.

  3. Introduction to the Alphabet of Lines – Cont’d • A line is the most fundamental and perhaps the most important, single entity on a technical drawing • Lines help to illustrate and describe the shape of objects that will later become real parts.

  4. Introduction to the Alphabet of Lines • Each line has a definite form and line weight. • The standard thick line weight varies from .030 to .038 of an inch. • The standard thin line weight varies from .015 to .022 of an inch.

  5. The Alphabet of Lines Illustrated

  6. Visible (Object) Hidden Center Dimension Extension Leader Section Cutting Plane Phantom Viewing Plane Break 11 Main Line Types

  7. Visible Lines • Also referred to as Object Lines • Dark, heavy lines. • Show the outline and shape of an object. • Define features you can see in a particular view.

  8. Visible or Object Line

  9. Hidden Lines • Light, narrow, short, dashed lines. • Shows the outline of a feature that can not be seen in a particular view. • Used to help clarify a feature, but can be omitted if they clutter a drawing.

  10. Hidden Lines

  11. Center Lines • Thin line consisting of long and short dashes. • Shows the center of holes, slots, paths of rotation, and symmetrical objects.

  12. Center Lines

  13. Dimension Lines • Dark, heavy lines. • Show the length, width, and height of the features of an object. • Terminated with arrowheads at the end.

  14. Center Lines

  15. Extension Line Dimension Line Extension Lines • Used to show the starting and stopping points of a dimension. • Must have at least a 1/16th space between the object and the extension line.

  16. Extension Lines

  17. Leader Line Leader Lines • Thin lines. • Used to show the dimension of a feature or a note that is too large to be placed beside the feature itself.

  18. Leader Lines

  19. Cutting Plane Lines • Thick broken line that is terminated with short 90 degree arrowheads. • Shows where a part is mentally cut in half to better see the interior detail.

  20. Cutting Plane Lines

  21. Section Lines • Thin lines Usually drawn at 45 degrees • There are different types of section lines • depending on the type of material being cut through

  22. Section Lines • Indicates the material that has been cut through in a sectional view • Use to show where the cutting-plane line has cut through material

  23. Section Lines

  24. Break Lines • Used to break out sections for clarity or for shortening a part. • Three types of break lines with different line weights. • Short Breaks. • Long Breaks. • Cylindrical Breaks.

  25. Short Break Line Short Break Lines • Thick wavy line. • Used to break the edge or surface of a part for clarity of a hidden surface.

  26. Long Break Lines • Long, thin lines. • Used to show that the middle section of an object has been removed so it can be drawn on a smaller piece of paper.

  27. Cylindrical Break Lines • Thin lines. • Used to show round parts that are broken in half to better clarify the print or to reduce the length of the object.

  28. Phantom Lines • Thin lines made up of long dashes alternating with pairs of short dashes. • Three purposes in drawings. 1. To show the alternate position of moving parts. 2. To show the relationship of parts that fit together. 3. To show repeated detail.

  29. Phantom Lines Alternate Position • Phantom lines can show where a part is moving to and from. • Eliminates the confusion of thinking there may be 2 parts instead of just 1.

  30. Phantom Line

  31. Relationship of Mating Parts • Phantom lines can also show how two or more parts go together without having to draw and dimension both parts.

  32. Repeated Detail • Phantom lines can show repeated detail of an object. • Saves the drafter time and the company money. • Less chance of drafter error.

  33. OnLine Slide Show • There is a brief and easy to follow demonstration of the Alphabet of Lines on line • http://www.wisc-online.com/objects/ViewObject.aspx?ID=MTL17903

  34. Summary • Now that we have discussed the 11 main line types, you should be able to do the following: 1. Identify the alphabet of lines. 2. Identify where the line types are used. 3. Produce the lines with various line weights.

More Related