1 / 6

INET

INET. &ROUTE M=4, L=41, ONEWAY=T, H=60, C=1, ID='RTE 41 SB ', N=-3401, -3517, -3605, -3609, -3639, -3641, 3677, -3703, -3741, -3779, -3831, -3887, -4001, -3999, -3995, 7117, -3977, -8389,

orson-gallegos
Download Presentation

INET

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. INET &ROUTE M=4, L=41, ONEWAY=T, H=60, C=1, ID='RTE 41 SB ', N=-3401, -3517, -3605, -3609, -3639, -3641, 3677, -3703, -3741, -3779, -3831, -3887, -4001, -3999, -3995, 7117, -3977, -8389, -8409, -8383, -3975, -8415, -8417, -8403, -8397, -3903, -3447, 2183, -7837, -3853, -3825, -3823, -3821, -8473, -3819, -3847, -7833, -3455 /END

  2. Palm Beach AM Peak Network

  3. Route_ID Route_Name Track Time Distance Mode Line Company Reporting Headway Speed Label Comment Layover Palm Beach Line Attributes

  4. Transit Network Issues • Model Conversion - Line Databases • Sources of speeds • FSUTMS/Tranplan – Highway Network and “curves” • TransCAD – Can assume a delay at each stop. Relationship between highway and transit speeds is whatever we specify. • Conventions for coding stop? • Should we use scheduled speeds?

  5. Transit Network Issues • Line attributes • Node/Stop Attributes • Time periods/Time of day • Coding of auto connectors • Coding of walk connectors • Planning vs. Operational Analysis • Other issues

  6. TransCAD Transit Network Editing In general, if you are doing line edits on a network that a route system is based on, it's always a good idea to have the route system open at the same time, and to perform line edits in the following manner: 1. Perform a few line edits at a time. If you are also showing the route system, you'll see if the edits will affect your route system. 2. Switch over to the route system. TransCAD should detect that changes have been made to the line layer, and will prompt you to update the route system. It may also prompt you to create a new .net file. If you're not making changes to the route system, you do not need to make a .net file.

More Related