1 / 25

DFMA Paradigms as Applied to the Swingline 747 Stapler

DFMA Paradigms as Applied to the Swingline 747 Stapler. Presented by, Team Alpha. Overview. Introduction to DFMA. Stapler Properties/Specifications. Material Selection. Manufacturing Processes. Assembly Analysis. Conclusions. Questions. INTRODUCTION. Product Specifications.

oscar-cross
Download Presentation

DFMA Paradigms as Applied to the Swingline 747 Stapler

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DFMA Paradigms as Applied to the Swingline 747 Stapler Presented by, Team Alpha

  2. Overview • Introduction to DFMA. • Stapler Properties/Specifications. • Material Selection. • Manufacturing Processes. • Assembly Analysis. • Conclusions. • Questions.

  3. INTRODUCTION

  4. Product Specifications

  5. DFMA as Applied For Material Selection

  6. MATERIAL SELECTION

  7. Intuitive Method For Material Selection • First best material • Same Material For Same Part • Problem solving material selection • Searching material selection The material is selected among the few materials the design engineer is familiar with. A property has given rise to problems. A new material is chosen in the same group of material with a higher value of the property. The designer takes more or less randomly into account one requirement at the time.

  8. Drawbacks with Intuitive Methods • Important requirements have often given rise to failures in operation. • First solution at hand is taken which is not very likely to be good solution. • The solution is typically far from the optimum giving the part poor competitiveness.

  9. Major Material Properties Which Influence Material Selection • Young's Modulus and Specific Stiffness • Strength • Toughness • Density • Cost

  10. Manufacturing Process

  11. Which Manufacturing Paradigms to Use

  12. Market size Large Market Type Market niches Mass production static Several Yes Product improvement No Concurrent Evolving product family Concurrent Product family

  13. Manufacturing Processes

  14. The Upper ArmStep: 1

  15. The Upper ArmStep: 2

  16. The Upper ArmStep: 3

  17. The Upper Arm Original Design Modified Design

  18. Staple Slide Original Design Modified Design

  19. Upper Staple Guide Original Design Modified Design

  20. Assembly Process

  21. Handling Times Data Table

  22. CONCLUSIONS • DFMA Paradigms • Material Selection • Manufacturing • Assembly • Overall Summary

  23. Questions

More Related