1 / 52

Chapter #10: Feedback

Chapter #10: Feedback. from Microelectronic Circuits Text by Sedra and Smith Oxford Publishing. Introduction. IN THIS CHAPTER YOU WILL LEARN The general structure of the negative-feedback amplifier and the basic principle that underlies its operation.

oshaughnessy
Download Presentation

Chapter #10: Feedback

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter #10: Feedback from Microelectronic Circuits Text by Sedra and Smith Oxford Publishing The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  2. Introduction • IN THIS CHAPTER YOU WILL LEARN • The general structure of the negative-feedback amplifier and the basic principle that underlies its operation. • The advantages of negative feedback, how these come about, and at what cost. • The appropriate feedback topology to employ with each of the four amplifier types: voltage, current, trans-conductance, and trans-resistance. • Why and how negative-feedback amplifiers may be unstable (i.e. oscillate) and how to design the circuit to ensure stable performance. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  3. Introduction • Most physical systems incorporate some sort of feedback. • Although theory of negative feedback was developed by electrical engineers. • Harold Black with Western Electric Company • Feedback can be negative (degenerative) or positive (regenerative). The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  4. Introduction • Feedback may be used to: • desensitize the gain • reduce nonlinear distortion • reduce the effect of noise • control the input and output resistances • extend bandwidth • These characteristics result, however, in loss of gain. • “The basic idea of negative feedback is to trade-off gain for other desirable properties.” The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  5. Introduction • Under certain conditions, negative feedback can be come positive. • This causes oscillation. • However, positive feedback does not always lead to instability. • Regenerative feedback has a number of applications – specifically, in active filtering. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  6. 10.1. The General Feedback Structure • Figure 10.1. shows the basic structure of a feedback amplifier – signal-flow diagram. • Open-loop amplifier has gain A (xo = Axi). Figure 10.1: General structure of the feedback amplifier. This is a signal-flow diagram, and the quantities x represent either voltage or current signals. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  7. 10.1. The General Feedback Structure • Output (xo) is fed to load as well as feedback network. • Feedback factor (b.) defines feedback signal (xf). • Feedback signal (xf) is subtracted from input (xi). • This characterizes negative feedback. • Gain of feedback amplifier is defined in (10.4). • Note that (10.4) may be approximated at 1/b.. • As such, gain of feedback amplifier is almost entirely determined by feedback network. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  8. 10.1. The General Feedback Structure The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  9. 10.1. The General Feedback Structure Equations (10.1) through (10.3) may be obtained from (10.6) and (10.7). The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  10. 10.2. Some Properties of Negative Feedback • 10.2.1. Gain De-sensitivity • Equations (10.8) and (10.9) define de-sensitivity factor of (1+Ab.). • 10.2.2. Bandwidth Extension • Equations (10.10) through (10.13) demonstrate how 3-dB frequencies may be shifted via negative feedback. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  11. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  12. 10.2. Some Properties of Negative Feedback • 10.2.3. Interference Reduction • Signal-to-interference ratio (S/I = Vs/Vn) • Equations (10.14) through (10.16) define this value. • Power supply hum • Pre-amplification • 10.2.4. Reduction in Nonlinear Distortion • Negative feedback may facilitate linearization. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  13. Figure 10.4: Illustrating the application of negative feedback to improve the signal-to-interference ratio in amplifiers. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  14. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  15. 10.3. The Four Basic Feedback Topologies • 10.3.1. Voltage Amplifiers • 10.3.2. Current Amplifiers • 10.3.3. Trans-conductance Amplifiers • 10.3.4. Trans-resistance Amplifiers The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  16. 10.3.1. Voltage Amplifiers • voltage amplifiers – accept input voltage and yield output voltage. • VCVS • Thevenin Output • voltage-mixing / voltage-sampling – is the topology most suitable for voltage amps. • Is also known as series-shunt feedback. • Provides high input resistance/low output resistance. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  17. Figure 10.6: Block diagram of a feedback voltage amplifier. Here the appropriate feedback topology is series–shunt. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  18. 10.3.1. Voltage Amplifiers • Increased input resistance results because Vf subtracts from Vs, resulting in smaller signal Vi at the input. • Low Vi causes input current to be smaller. • This effects higher input resistance. • Decrease output resistance results because feedback works to keep Vo as constant as possible. • DVo and DIo change / vary together. • This effects lower output resistance. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  19. Figure 10.7: Examples of a feedback voltage amplifier. All these circuits employ series–shunt feedback. Note that the dc bias circuits are only partially shown. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  20. 10.3.2. Current Amplifiers • current amplifier – accepts input current to generate output current. • CCCS • Norton Source • current-mixing / current-sampling – topology is most suitable for current amps. • Is also known as shunt-series feedback. • Provides lowinput resistance/high output resistance. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  21. Figure 10.8: (a) Block diagram of a feedback current amplifier. Here, the appropriate feedback topology is the shunt–series. (b) Example of a feedback current amplifier. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  22. 10.3.3. Transconductance Amplifiers • transconductance amplifier – accepts input voltage and generates output current. • VCCS • Norton Source Output • voltage-mixing / current-sampling – topology is most suitable for transconductance amps. • Is also known as series-series feedback. • Provides highinput resistance/high output resistance. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  23. Figure 10.10:(a) Block diagram of a feedback transconductance amplifier. Here, the appropriate feedback topology is series–series. (b) Example of a feedback transconductance amplifier. (c) Another example. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  24. 10.3.4. Transresistance Amplifiers • transresistance amplifier – accepts input current and generates output voltage. • CCVS • Thevenin Source Output • current-mixing / voltage-sampling – topology is most suitable for current amps. • Is also known as shunt-shunt feedback. • Provides lowinput resistance/low output resistance. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  25. Figure 10.11: (a) Block diagram of a feedback transresistance amplifier. Here, the appropriate feedback topology is shunt–shunt. (b), (c), and (d) Examples of feedback transresistance amplifiers. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  26. 10.4. The Feedback Voltage Amplifier • Series-shunt is appropriate feedback for voltage amplifier. • Unilateral open-loop amplifier (circuit A). • Ideal Voltage-Sampling, voltage-mixing feedback network (b circuit) • Input resistance Ri • Open Circuit Gain A • Output resistance Ro The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  27. Figure 10.12: The series–shunt feedback amplifier: (a) ideal structure; (b) equivalent circuit. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  28. 10.4.1. The Ideal Case The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  29. Figure 10.13: Determining the output resistance of the feedback amplifier of Fig. 10.12(a): Rof = Vx /Ix. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  30. 10.4.2. The Practical Case • In practical case, feedback network will not be ideal VCVS. • Actually, it is resistive and will load the amplifier. • Source and load resistances will affectA, Ri, and Ro. • Source and load resistances should be lumped with basic amplifier. • Expressed as two-port network. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  31. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  32. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  33. 10.4.3. Summary • 1. Ri and Ro are the input and output resistances, respectively, of the A circuit in Figure 10.15(a). • 2. Rif and Rof are the input and output resistances, respectively, of the feedback amplifier, including Rs and RL (see Figure 10.14a). • 3. The actual input and output resistances of the feedback amplifier exclude Rs and RL. These are denoted Rin and Rout in Figure 10.14(a) and can be determined via equations (10.25) and (10.25). The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  34. 10.5. The Feedback Transconductance Amplifier Figure 10.18: The series–series feedback amplifier: (a) ideal structure; (b) equivalent circuit. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  35. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  36. 10.6. The Feedback Transresistance Amplifier Figure 10.24: (a) Ideal structure for the shunt–shunt feedback amplifier. (b) Equivalent circuit of the amplifier in (a). The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  37. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  38. 10.7. The Feedback Current Amplifier Figure 10.28: (a) Ideal structure for the shunt–series feedback amplifier. (b) Equivalent circuit of the amplifier in (a). The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  39. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  40. 10.8. Summary of Feedback Analysis Method • Always begin analysis by determining an approximate value for the closed-loop gain (Af). • Assume that loop gain Ab is large. • Af = 1/b • This value should serve for final check on Af. • The shunt connection at input or output will always result in reducing the corresponding resistance. • In utilizing negative feedback to improve the properties of an amplifier under design, the starting point is selection of feedback topology. • Feedback factor (b.) may be determined as 1/Af. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  41. 10.9. Determining Loop Gain The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  42. 10.10 The Stability Problem • In a feedback amplifier, the open loop gain (A) is generally a function of frequency. • Therefore, it should be called open-loop transfer functionA(s). • One big question is: What happens to gain at higher frequencies? • This has huge implications on stability of the amplifier. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  43. 10.4.1. The Ideal Case The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  44. 10.4.2. Nyquist Plot Figure 10.34: The Nyquist plot of an unstable amplifier. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  45. 10.11. Effect of Feedback on the Amplifier Poles Figure 10.35: Relationship between pole location and transient response. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  46. 10.4.1. The Ideal Case The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  47. 10.11. Effect of Feedback on the Amplifier Poles Figure 10.36: Effect of feedback on (a) the pole location and (b) the frequency response of an amplifier having a single-pole, open-loop response. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  48. 10.12. Stability Study Using Bode Plots The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  49. Summary • Negative feedback is employed to make the amplifier gain less sensitive to component variations; to control input and output impedances; to extend bandwidth; to reduce nonlinear distortion; and to enhance signal-to-interference ratio. • The advantages above are obtained at the expense of a reduction in gain and at the risk of the amplifier becoming unstable (that is, oscillating). The latter problem is solved by careful design. • For each of the four basic types of amplifier, there is an appropriate feedback topology. The four topologies, together with their analysis procedures, are summarized in Table 10.1. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

  50. Summary • The key feedback parameter are the loop gain (Ab.), which for negative feedback must be a positive dimensionless number, and the amount of feedback (1+Ab.). The latter directly determines gain reduction, gain desensitivity, bandwidth extension, and changes in input and output resistances. • Since A and b are in general frequency dependent, the poles of the feedback amplifier are obtained by solving the characteristic equation 1+A(s)b(s) = 0. • For the feedback amplifier to be stable, its poles must all be in the left-hand side of the s-plane. The College of New Jersey (TCNJ) – ELC251 Electronics I http://anthony.deese.googlepages.com Based on Textbook: Microelectronic Circuits by Adel S. Sedra (0195323033)

More Related