1 / 36

Honda Fit Turbo Kit

Honda Fit Turbo Kit. Installation Manual. Take off windshield wiper. Take this part off. Take off the engine of windshield wiper. Uninstall the protecting hood. Take off the front bumper. Take off the stock manifold. Remember to keep the stock O 2 Sensor that you take off.

osmond
Download Presentation

Honda Fit Turbo Kit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Honda Fit Turbo Kit Installation Manual

  2. Take off windshield wiper

  3. Take this part off

  4. Take off the engine of windshield wiper

  5. Uninstall the protecting hood

  6. Take off the front bumper

  7. Take off the stock manifold

  8. Remember to keep the stock O2 Sensor that you take off

  9. Take off the stock mid-pipe

  10. Remember to keep the stock O2 Sensor that you take off

  11. Install manifold on the turbocharger

  12. Please note this particular bolt should be locked from the bottom up, so it doesn’t block another bolt beside it. Other 3 bolts are locked the normal way from top.

  13. Install the silicon hose first, remember the turbo clamp, too

  14. Turbocharger can be installed from this angle

  15. Connect compressor housing inlet and air filter with Aluminum pipe Lock up spot

  16. Please assemble the pipes according to the specified order above ５ １ ２ ４ ３

  17. Aluminum Pipe 1 1 Lock up spot

  18. Aluminum Pipe 2 ２

  19. Aluminum Pipe 3 ３ Lock up spot

  20. Install intercooler, please pay attention to the 3 lock up spots.

  21. Aluminum Pipe 4 ４ Lock up spot

  22. Aluminum Pipe 5 Install the smaller air filter Install blow off ５

  23. Set up of aluminum pipe and vacuum pipe Install vacuum pipe Blow off MAP sensor

  24. Install oil feed line Please lock it tight to prevent oil leakage

  25. Oil feed line set up

  26. Connection of oil feed line on the engine side

  27. Install oil drain pipe

  28. Install front pipe

  29. Install mid pipe Connect O2 Sensor onto mid pipe first, then install both onto to car

  30. Remember to connect O2 Sensor

  31. Install the protecting hood back up

  32. Install engine of windshield wiper back up

  33. Put the cover back

  34. Install windshield wiper back on

  35. Put the front bumper back ＺＡＧＥ

  36. THE END

More Related