370 likes | 728 Views
GC & LC. Gas Chromatography-1. Schematic diagram. Gas Chromatography-2. Columns : open tubular columns. Gas Chromatography-3. m.p.(gas) - s.p. s.p.: solid ( using adsorption ) ex: SiO 2 column ages: Si-O-H cause tailing peak. 2) s.p.: liquid ( GLC, using partition )
E N D
Gas Chromatography-1 • Schematic diagram
Gas Chromatography-2 • Columns : open tubular columns
Gas Chromatography-3 • m.p.(gas) - s.p. • s.p.: solid(using adsorption)ex: SiO2 column ages: Si-O-H cause tailing peak. 2) s.p.: liquid(GLC, using partition) a range of polarities (Table 22-1), “like dissolves like” Decrease thickness of stationary phase leads to • Resolution (H) • tr • Sample capacity
Gas Chromatography-4 Like dissolves like (a) S.P: nonpolar, b.p. dependent (b) S.P: polar B) The effects of column polarity on separation
How changing the S.P. can affect separation Figure 22-4 Resolution of trans fatty acids in hydrogenated food oil improves when the stationary phase is changed from DB-23 to HP-88 (aryl group) P.484
Gas Chromatography-5 C) Common solid s.p. : a) Porous carbon :larger molecules bind more tightly than small ones, flexible molecules bind more than rigid ones b) Molecular sieves : inorganic materials with nanometer-size cavities that retain & separate small molecules : H2, O2, N2, CO2, CH4. (Fig. 22-5) c) Guard column Collect nonvolatile components that would otherwise be injected into a column and never be eluted.
Gas Chromatography-6 packed column vs. open tubular column higher resolution lower sample capacity
Gas Chromatography-7 • Temperature programming temp of column v.p. solute, tr sharpens peaks isothermal : constant temp. temp. programming (gradient) : raise the column temp. during the separation.
Gas Chromatography -8 Figure 22-6 (a) Isothermal and (b) programmed temperature chromatography of linear alkanes through a packed column with a nonpolar stationary phase.
Gas Chromatography-9 4. Carrier Gas
Gas Chromatography-10 • 5. Sample Injection • 1) gasses, liquids, or solids • vaporized, not decomposition • 2) injection time bands broader • 3) injected by syringe (manual or automatic injection)
Gas Chromatography-11 Figure 22-7 Injection port operation for (a) split, (b) splitless, and (c) on-column injection into an open tubular column.
-12Gas Chromatography split injection (350℃) (only 0.1-10% sample) Routine method concentrated sample high resolution dirty samples could cause thermal decomposition splitless injection (220℃) (80%) For quantitative analysis and for analysis of trace components of mixture high resolution solvent trapping (Tsolvent < 40℃) for dilute sample cold trapping (Tsolute < 150℃) for high-boiling solutes on-column injection(50℃) (100%) best for thermally unstable solutes.
Gas Chromatography-13 5. Detectors Qualitative analysis :mass spectrometer, IR Quantitative analysis :area of a chromatographic peak.
Gas Chromatography-14 d) Mass Spectrometric Detection and Selected Reaction Monitoring : - A mass spectrometer is the single most versatile detector. - Total Ion Chromatogram (TIC) - selected ion monitoring (SIM) at on value of m/z - selected reaction monitoring (SRM) = tandem mass = MS/MS - Multiple reaction monitoring (MRM)
QQQ Mass Spectrometer Precursor ion (parent ion) vs. Product ions (daughter ion) Solid phase extraction (SPE)
Liquid Chromatography-1 1. open, gravity-feed column 2. closed column (under high pressure) packed with micron-size particles. (HPLC) 3. stationary phase : a. adsorption : silica (SiO2xH2O), alumina (Al2O3xH2O), b. molecular exclusion, c. ion-exchange, affinity
Liquid Chromatography-2 compete with ▲ for binding on s.p. the more strongly bind to s.p.eluent strength
Liquid Chromatography-3 4. Eluent strength : Table 22.2 The more polar solvent eluent strength tr 5. Gradient elution : increased the eluent strength during the separation in liquid chromatography.
HPLC-2 1. Through a closed column, and needs high pressure. 2. s.p. particles size microporous particles of silica with diameters of 1.5-10 um s.p. m.p. faster, i.e. C in van Deemter eqn. resolution
HPLC-4 3. Stationary phase a) Normal-phase chromatography :polar s.p. and less polar solvent. Eluent strength is increased by adding a more polar solvent. b) Reversed-phase chromatography :low-polarity s.p. and polar solvent. Eluent strength is increased by adding a less polar solvent.
HPLC-5 c) Bonded stationary phase. polar vs. nonpolar d) Optical isomers D- & L-amino acids for drug industry see p.494 for R = polar or nonpolar
HPLC-6 d) Optical isomers separation ex: for ant-inflammatory drug Naproxen
HPLC-7 5. Solvents a) Isocratic elution : elution with single solvent or a constant solvent mixture b) Gradient elution : solvent is changed continuously from a weak eluent strength to a strong eluent strength by mixing more and more of a strong solvent to a weak solvent during the chromatography.
HPLC-8 • Figure 22-20 Isocratic HPLC • separation of a mixture of aromatic • compounds at 1.0 mL/min on a • 0.46×25 cm Hypersil ODS column • (C18 on 5-μm silica) at ambient • temperature (~22℃): • benzyl alcohol; • phenol; • 3’, 4’-dimethoxyacetopheneone; • benzoin; • ethyl benzoate; • toluene; • 2,6-dimethoxytoluene; • o-methoxybiphenyl. A : KH2PO4(aq) B: CH3CN(l)
HPLC-9 The gradient can be used to resolve all peaks by reducing the time from 2 h to 38 min.