1 / 7

November 9, 2012 Changing or replacing G460 sensors

November 9, 2012 Changing or replacing G460 sensors. G460 sensor replacement. G460 sensors are equipped with “smart” PCBs that identify the type of sensor and other settings to the instrument

ovid
Download Presentation

November 9, 2012 Changing or replacing G460 sensors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. November 9, 2012 Changing or replacing G460 sensors

  2. G460 sensor replacement G460 sensors are equipped with “smart” PCBs that identify the type of sensor and other settings to the instrument As long as the type of sensor is supported when installed in a particular position on the PCB, the instrument will automatically update the sensor configuration when it is restarted

  3. Sensor replacement Make sure instrument is turned off Remove battery pack Loosen the four screws holding the front and back of the instrument housing together Remove the back cover

  4. Sensor replacement Remove and replace the required sensor(s)

  5. Reassembling the instrument housing Reattach the back of the instrument housing Tighten the 4 screws in diagonal sequence (just like tightening the lug nuts on a tire)

  6. Returning the instrument to service Calibrate ALL sensors in the instrument (whether or not they have been changed) before returning the instrument to service It is best to let new sensors stabilize in the instrument for 30 minutes prior to calibration

  7. Questions?

More Related