PartsAvatar Gives You The Solution Of OBD Code P000C - A Camshaft Position Slow Response Bank 2

1. OBD Code P000C - A Camshaft Position Slow Response Bank 2 Is the Check Engine Light illuminated on the dashboard panel of your car? Is your vehicle running with decreased fuel mileage? If your answer is “YES” then there could be a problem with the timing or the slow response of the camshaft, and the result is an OBD error code P000C.

2. Learn More About OBD Error Code P000C • The OBD error code P000C indicates that your vehicle has a problem with the performance of its engine and the fuel efficiency. This means that the powertrain control module (PCM) which controls the oil control valves has detected a fault with the position and timing of the camshaft. • So, what is this problem with the camshaft timing and position? In a variable valve timing (VVT) system, the powertrain control module (PCM) controls the solenoid-operated oil control valves which subsequently apply pressure to the actuator placed between the camshaft and timing chain sprocket. The actuator in turn alters the phase change of the camshaft. If the camshaft position does not match the position desired by the PCM during camshaft phase changes then a trouble code P000C is set. This indicates that the camshaft placed at the left and front exhaust valve on the opposite bank of the engine (opposite to the bank containing cylinder #1) is not in the correct position. • What causes this problem with “A” camshaft position slow response bank 2? • There is an improper supply of oil • There is a fault with the camshaft position sensor • The oil control valve has failed • The VVT actuator has failed • There are problems with the timing chain • There are wiring problems • There is a fault with the PCM • Due to low oil pressure the camshaft position is erratic • There is an oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body • There is a problem with the camshaft advance mechanism binding (VCT unit)

3. The VCT phaser is damage • The issue of radio frequency interference (RFI) • Symptoms Of OBD Error Code P000C • We at Parts Avatar Canada are here to help you diagnose your car’s camshaft problem efficiently and avoid any misdiagnosis. You can find out if there is a problem with your vehicle’s camshaft position by looking for the following symptoms. • Common Symptoms • You will see the Check Engine Light illuminate • Your engine’s power can decrease • Your engine may operate with greater noise and roughness • Your fuel mileage can also decrease • Replace/Repair These Parts To Fix OBD Code P000C • Engine Control Module- OBD Error Code P000C can also be due to faulty ECMs. Replace faulty components immediately. • Powertrain Control Module- P000C error code also relates to problems with the powertrain that is not able to generate response in time causing distorted engine timing. Find all the Powertrain related parts with us. • Diagnostic Tool - Make use of professional scan and diagnostic tools to detect and correct the OBD code error. • Auto Switches & Sensors - Defective switches or faulty sensors can also cause OBD error to flash. So, replace them now.

4. Air Temperature Sensor- The Air Temperature sensor are usually exposed to air entering the engine. As it is a very important step in combustion, this sensor plays a crucial role in the performance. Replace faulty sensor now! Air Intake Kits - Air intake system checks on the proper air to fuel ratio entering the engine. Buy quality air intake kits from us to boost the engine performance. Mass Air Flow Sensor - A faulty mass airflow sensor will cause problems of engine not starting or hard idle and loss of power. Replace damaged/faulty MAF sensors today!