vertical drums

1. INCHES HIGHSPEED WINCHES HIGHSPEED WINCHE vertical drums rider technical BGVC1 Sil 3

2. vertical drums Each cable pulley / pair of cable pulleys induce forces to local construction. Depending on array certain forces occur. Example: Artist 70kg + costume and attachment appliance + dynamic induces forces of app. 1.5kN in each cable direction. Example: Fhor 1,5kN+ Fvert 1,5kN @90°  Fres 2,1kN. The local construction must be capable of these forces. Be aware that up to 8 Artistes may induce this forces!

3. vertical drums 400V three-phase current 50 Hz, with proper neutral and earth must be assured!One or two 125 A CEE plug next to the winches, fused 125A time lag, with no other power consumers on this fuses. It depends on number of winches. If the power is provided by local generator its power capacity should be at least 120KVA, depends on the number of winches as well. No other power consumers on this generator as well.  It is very important that there is no RCD or any other earth leakage protector of any kind in the whole power line! If any existing RCD is not detachable, there must be a transformer to get ground free. The transformer must be capable of 120 KVA, but depends on the number of winches. There are no other power consumers allowed after the RCD, even if the generator would be big enough. Any power failure is definitely serious and will end the show. Any power failure during set-up or rehearsals will cause considerable delay In any case there will be no danger to artist or any participants. measurements length 1345 mm width 1000 mm height 900 mm

4. vertical drums 1 desk / platform 1 x 2m, 2 chairs, 220 V electricity. 3 data cables will be installed between the winches and the operator place. Outdoor: Additional 1 Pavillion with walls 3 x 3 m. If it is cold appropriate heating is necessary. It is very important, that at any time the operator has a free sight to the action area. The Action Area and the Space of the Winches must be separated against any access.

5. vertical drums The winches are usually on the ground and are coupled together in a line or at least blocks. The ground must be plain, if required a plain platform must be build. Usually the winches are placed on the ground. The drummers will be fixed left and right with 2 steelcables on their harness. These steelcables conduct from the winches to 1 or 2 redirection cable pulleys (or pair of cable pulleys). The last pair of pulleys are attached with a distance of app. 80 cm to 100 cm. From this last pair of pulleys the steel cable goes vertically down to the artist. Keep in mind that each pulley or pair of pulleys induces the same forces to the local construction. Setup time incl. technical setup, 1-2 days Time for programming, it depends on the show, 6-8 hours. Additional to the show programming you can plan with about 4 hours for light programming. Fork lift truck and pallet lorry on location is needed, depends on location

6. vertical drums • Further possibilities for the use of winches  • Artists float in the horizontal on support cables, slide systems and in 3D flight through stadiums and arenas. • Stuntmen and stuntwomen run in the vertical as if it was an ordinary thing to do. • Facades, high-rises, bridge pylons, glass walls, towers, exhibits, gondolas_ • Roping formations from gondolas_ from cranes_ fast roping from the helicopter_ • spectacular_ impressive_ overwhelming_ performances • we translate your visions into artistic and technical reality • top artists, creative minds, IT specialists and innovative engineers work for you • we set our own standards to achieve every goal together with you • talk with us about your ideas – we can deliver the solutions for you