1 / 42

SPOTTERS TRAINING

SPOTTERS TRAINING. Elkhorn Construction Inc. Definition. A spotter is someone trained to look. Why we need Spotters in our industry. A spotter is necessary when the driver/operator does not have a full view of the working area and need someone to direct him/her.

paul-duncan
Download Presentation

SPOTTERS TRAINING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SPOTTERS TRAINING Elkhorn Construction Inc.

  2. Definition A spotter is someone trained to look.

  3. Why we need Spotters in our industry • A spotter is necessary when the driver/operator does not have a full view of the working area and need someone to direct him/her. • Not only if is there the possibility of injuring someone, but of causing property damage

  4. Fatalities/Injuries Potentially Averted Annually by New Standard Source: U.S. Department of Labor, OSHA, Office of Regulatory Analysis

  5. Equipment Fatalities by Age Group Source: Bureau of Labor Statistics

  6. Industries Where Powered Industrial Truck Accidents Occurred Source: OSHA Fatality/Catastrophe Reports, complied by OSHA Office of Electrical/Electronic and Mechanical Engineering Safety Standards.

  7. Industries Where Powered Industrial Truck Accidents Occurred • BEING STRUCK BY, OR CAUGHT IN- BETWEEN, ARE TWO OF THE LEADING CAUSE OF INJURIES AND FATALITIES ON CONSTRUCTION SITES! • STRUCK BY (22%) • CAUGHT IN-BETWEEN (18%)

  8. Vehicle / Heavy Equipment Danger Zone • Heavy Equipment is an essential part of most industry around the world. However, statistics indicate that they also present a very significant hazard to people occupying the same workspace, since injuries can be severe or fatal as equipment is heavy and powerful.

  9. Vehicle / Heavy Equipment Danger Zone • Blind spots • Rotating machinery • Swing radius • Travel Path • Approaching the machinery before acknowledging the operator • Non-essential workers on the area • Struck by overhead loads falling IF YOU CAN TOUCH THE MACHINERY YOU ARE TOO CLOSE!!!

  10. Learn to know the… Danger-ZONE THE SHADED AREA SURROUNDING EACH VEHICLE REPRESENTS THE DANGER ZONE IN WHICH THE VEHICLE OPERATOR’S VIEW OF PEDESTRAN TRAFFIC IS GREATLY REDUCED OR OBSCURRED ALTOGETHER.

  11. Eye level 10 ft - 0 in above ground level 34’ 0” 36’ 4” 68’ 0” 95’ 0” Manlift

  12. Area of fully obstructed view Eye level 7 ft - 0 in above ground level 25’ 5” 17’ 8” 15’ 9” 10’ 0” 3’ 0” 16’ 4” 27’ 2” Hydraulic Crane

  13. Eye level 7 ft - 7 in above ground level 8’ 4” 29’ 1” 9’ 1” 7’ 7” 18’ 5” Backhoe

  14. Eye level 6 ft - 3 in above ground level 16’ 0” 8’ 2” 8’ 2” 3’ 10” 12’ 5” 12’ 1” 18’ 7” Bulldozer

  15. Eye level 10 ft - 0 in above ground level 28’11” 14’ 8” 16’ 2” 14’ 3” 14’ 10” 21’ 11” Front End Loader

  16. Eye level 5 ft - 5 in above ground level 11’ 7” 11’ 5” 21’ 8” 4’ 10” 6’ 1” 3’ 1” 6’ 3” Bobcat/Skid Steer

  17. Eye level 7 ft - 3 in above ground level 85’ 0” 18’ 2” 10’ 9” 7’ 9” 3’ 0” 39’ 0” 21’ 2” 14’ 10” High Reach RT Fork Lift

  18. Eye level 6 ft above ground level 8’ 6” 3’ 1” 3’ 8” 5’ 7” 3 Ton Forklift

  19. Eye level 8 ft - 8 in above ground level 13’ 7” 13’ 0” 6’ 4” 9’ 2” 7’ 0” 10’ 7” 12’ 2” 10 Ton Forklift

  20. Eye level 8 ft - 9 in above ground level 26’ 8” 15’ 5” 4’ 8” 4’ 5” 13’ 6” 8’ 8” 14’ 1” 17 Ton Forklift

  21. Eye level 6 ft - 10 in above ground level Area of fully obstructed view 27’ 1” 6’ 5” 42’ 8” 40’ 6” 36’ 8” Semi-Truck & Trailer

  22. Eye level 8 ft - 0 in above ground level Area of fully obstructed view 13’ 2” 13’ 3” 3’ 4” 8’ 10” 8’ 0” Refuse Truck

  23. Eye level 8 ft - 0 in above ground level Area of fully obstructed view (more than 300 ft) Area of fully obstructed view from Eductor Hose (more than 100 ft) 29’ 0” 24’ 0” 37’ 4” 8’ 7” 31’ 0” 24’ 6” 41’ 0” HiVac Truck

  24. Vehicle / Heavy Equipment Danger Zone • Make sure no one enters the danger zone while the machinery is in operation, the danger zone is the area around the equipment/vehicle where the operator don’t have a full visibility during normal operation. Stay at least ten feet away from all sides of the Machinery • Front • Both Sides (left, right) Yes, the right rear side is one of the most dangerous • Back Yes, behind the machinery is also one of the most dangerous • Up and Bottom

  25. Vehicle / Heavy Equipment Danger Zone If you’re working near moving vehicles or equipment, what are the most important safety points to remember? • Stay alert at all times. • Don’t distract yourself. • Keep a safe distance. • Keep off the equipment unless authorized. • Watch out for shifting or unstable loads. • Wear a bright orange vest if you are working near moving vehicles or heavy equipment. • Wear reflectorize clothing at night.

  26. SPOTTERS -AN IMPORTANT REQUIREMENT • There is the important rule for drivers and operators: "Don't back up or move a heavy equipment unless you have a spotter directing your movement." It's an easy rule to remember. The important thing is to obey it.  

  27. When to use a Spotter • When: • backing a vehicle or machinery • entering or moving a vehicle or machinery in a congested area • poor visibility • close proximity • Pedestrians/coworkers or other contractors on the surroundings • lateral, overhead, or other obstructions

  28. SPOTTERS -AN IMPORTANT REQUIREMENT • This person has to watch out for others as well as for himself (keeping enough distance in between spotter and equipment moving), and make sure the vehicle doesn't damage property. • It may appear as an easy task. But there are a lot of dangers involved. 

  29. THE SPOTTER'S RESPONSIBILITIES • SPOTTERS AND DRIVERS/OPERATOR MUST WORK TOGETHER • The operator will discuss the positioning, backing, movement and plan with the spotter before proceeding. • The operator shall stop the vehicle immediately prior to losing sight or losing sight of the spotter.

  30. THE SPOTTER'S RESPONSIBILITIES • In order to give you an unobstructed view of the entire movement, when directing the driver/operator, stand at the driver's side. • It's important that the driver understands your signals, so get together with the driver before any movement and explain the signals you will use. • allow for sufficient stopping distance and clearance

  31. THE SPOTTER'S RESPONSIBILITIES • Always be sure to use the same signals for the same moves (avoid misunderstandings) • Hand signals are much better than vocal signals. Because of noise, a shouted signal may not be heard or may be misunderstood. • If the driver is unclear at any point about the spotter’s signals, the vehicle should be stopped immediately.  Never assume what the spotter is signaling, if there is any doubt  

  32. THE SPOTTER'S RESPONSIBILITIES STRAIGHT BACKWARD OR FORWARD – To move the vehicle in a straight line either forward or backward.

  33. THE SPOTTER'S RESPONSIBILITIES TURN – To move the vehicle either to the right or left while the vehicle is moving

  34. THE SPOTTER'S RESPONSIBILITIES DISTANCE TO STOPPING POINT – To provide the driver a visual reference for the distance to the stop point.

  35. THE SPOTTER'S RESPONSIBILITIES CLEARED TO LEAVE THE AREA – To show the driver the vehicle is clear of obstructions and is cleared to leave in the direction indicated.

  36. THE SPOTTER'S RESPONSIBILITIES STOP – Stop all movement of the vehicle, await further instructions.

  37. THE SPOTTER'S RESPONSIBILITIES • When spotting, concentrate on spotting –The task at hand. • Maintain eye contact with the driver/operator, even if you have to change position frequently. • If the spotter needs to stop spotting momentarily for any reason, first make sure that the driver/operator stops the equipment.

  38. BE SURE YOU'RE SEEN • If you or someone else have to pass behind a vehicle or equipment: • stop the vehicle or equipment first. • As you're passing behind it, extend your hand at arm's length and place it against the back of the vehicle/equipment. Then if the vehicle/equipment starts to move,  you'll be able to feel the movement and get out of the way.  

  39. BE SURE YOU'RE SEEN • In addition to standing well to the driver's side of the vehicle/equipment, wear a fluorescent vest. • In the dark, don't blind the driver by shining your flashlight in the rearview mirror.

  40. BE SURE YOU'RE SEEN • Day or night, avoid walking backward. If you have to, when walking backwards, be careful not to trip (check the path). 

  41. QUESTIONS

More Related