Common Paint Problems Solutions - You should know!

1. Common Paint Problems Solutions - You should know!

2. Working with reputed painting companies can help you accomplish all your residential and commercial painting needs. Whether you plan to paint the interior part of the house or the exterior ones, you can do that right now. But, there are some common paint problems which reliable to local painters from Melbourneand it might help you understand before they even start working on your project. It is just to remain on the safer side. Don’t worry about the problems as they have solutions to it as well. • The first issue is with blistering paint: Blistering paint, as identified by local painters from Melbourne, is smaller to medium sized blisters or bubbles just under the paint film and it is most common on wood trim and siding. The potential causes are many. Painting under direct sunlight on hot substrate can cause blisters. It can trap solvent vapour as paint tries way too quickly. Moreover, painting when wood is damp or even rain, dew or high humidity just after the latex paint are some of the other reasons behind blistering formations. As a solution, the painters at Melbourne south east will scrape away blistered paint and sand to the bare wood. They will let the wood dry completely and then sand, prime and even paint in non-direct sunlight and non-humid conditions. They have to use high quality latex paints.

3. Alligatoring and checking – next issue: Alligatoring is mainly failure in the paint film, where it might take some time on cracking pattern of the deep relief resembling that of a reptile skin like alligator. On the other hand, you have checking, which is a similar form of failure but less severe. It is mostly characterized by fairly long spaced cracks in paint film having shallow depth of relief. You need help from painters at Melbourne south east to treat these issues now. The fix is same for alligatoring and checking. You just have to remove old paint. Then sand, prime and repair the area with flexible latex depending on the paint. Always remember to use premium quality latex paint for this service.

4. Efflorescence – know more about it: An issue with painted masonry construction is that efflorescence can take place. It is identified by crusty deposition of white salt that might bubble through paint film from masonry structure. Salts in concrete or brick become dissolved with water and then will leach to surface as the water starts to evaporate. Get help fromcommercial painting company for the solutions. If the moisture is getting into masonry wall, then you have to eliminate source of moisture by tuck-pointing cracks or missing mortar in wall. In case the moisture is migrating from outside, then you have to apply waterproofing to outside of wall. You need to remove all loose flaking and efflorescence with wire brush before repainting.

5. Other than these issues, you have chalking, mildew, sagging or running, and rust discolouration as some of the other painting issues. Always remember to contact experts from commercial painting company for immediate help in this regard for sure. For More Information Visit us: www.allpropaintsystems.com.au