1 / 21

CE 201 - Statics

CE 201 - Statics. Chapter 7 – Lecture 1. INTERNAL FORCES. Internal Forces Developed in Structural Members (2-D) Internal Forces Developed in Structural Members (3-D). Internal Forces Developed in Structural Members (2-D).

penelope-morrow
Download Presentation

CE 201 - Statics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CE 201 - Statics Chapter 7 – Lecture 1

  2. INTERNAL FORCES • Internal Forces Developed in Structural Members (2-D) • Internal Forces Developed in Structural Members (3-D)

  3. Internal Forces Developed in Structural Members (2-D) • To design a member, the forces acting within the member need to be determined. These forces are known as the internal forces and can be found by using the method of sections. • The method can be illustrated by the following example.

  4. F1 F2 A B C F1 F2 Ax B A C By Ay The reactive forces at the supports (A) and (B) can be determined by applying the Equilibrium Equations (Fx = 0; Fy = 0; Mo = 0) on the entire structure.

  5. F1 F2 Ax B A F2 C By Ay B By F1 Ax A C C Ay Suppose that the forces acting at (C) are to be found, then it is necessary to make a section at (C).

  6. F1 F2 VC VC MC MC Ax NC NC B A C By Ay C NC VC MC These external forces and couple moment will develop at the cut section in order to prevent the segments from translating or rotating Nis called the normal force V is called the shear force M is called the bending moment or couple moment Note: VC, NC, and MC on both segments are equal in magnitude and opposite in direction. VC, NC, and MC can be determined by applying the equilibrium equations (Fx = 0; Fy = 0; Mo = 0) on one of the segments.

  7. F1 F2 VC VC MC MC Ax NC NC B A C By Ay C Internal Forces developed in Structural Membranes (3-D)

  8. z Vz Mz y Ny C My Mx Vx x • Ny is normal to the cross-sectional area. • Vx and Vz are components of the shear force and they are acting tangent to the section. • My is the torsional moment or twisting moment. • Mx and Mz are components of the bending moment. • The resultant loadings (forces and moments) act at the centroid of the cross-sectional area.

  9. Procedure for Analysis • Support Reactions (before cutting) • Free-body Diagram (of the segment that has the least number of loadings) • Equilibrium Equations

More Related