220 likes | 407 Views
Motor Packages. Solder 100K resistors (R11,R12,R14,R15). Solder 1K Resistors (R1,R2,R3,R4,R5,R6,R8,R9). Solder 2x3 Header. Add 2 jumpers to 3x2 header. Quad package solder (R24) as shown. Otherwise add a 100 ohm resistor to (R24).
E N D
Quad package solder (R24) as shown. Otherwise add a 100 ohm resistor to (R24)
Add 100uf electrolytic to (C17). Long lead goes to +. – on these caps are also marked
Place second l6205, do not solder. But do solder the heatsink.
Solder electrolytic to (C10) Long lead goes to +. Cap is also marked with – on the - side