100 likes | 353 Views
Please visit below link:<br>https://www.robomart.com/battery-chargers-adaptors-eliminators
E N D
ARDUINO UNO R3 POWER SUPPLY PRODUCT LINK:https://www.robomart.com/battery-chargers-adaptors-eliminators BY ROBOMART
INTRODUCTION: • The Arduino Uno R3 Power supply is a microcontroller board based on • theATmega328P. • It has 14 digital input/output pins (of which 6 can be used as PWM • outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a • power jack, an ICSP header and a reset button. • It contains everything needed to support the microcontroller; • simply connect it to a computer with a USB cable or power it with a • AC- to-DC adapter or battery to get started.. • You can tinker with your UNO without worrying too much about • doing something wrong, worst case scenario you can replace the chip for • a few dollars and start over again.
Continue…… • In this modern technology, whether electronic, mechanical or electrical • all of these require some backup. • For backup, inventions reached to batteries which worked for longer • hours depending upon device which requires more power. • If power required is more, battery will be dead within few hours and • vice versa. There exist two types of batteries disposable and • rechargeable. In rechargeable, battery is charged when dead and • in disposable battery, cells once dead can’t be used again.
Continue… • Battery eliminators and battery adapters have replaced use of batteries. • Instead of utilizing battery, it’s better to use eliminators because when connected provide power to your electronic items. • It’s used in number of devices especially electronic circuits and caters 9volt DC supply. • We have maintained a renowned approach towards eliminators and powerful battery chargers in India. So without any doubt, quickly grab opportunity and purchase battery as per requirements.
CONTACT US: • B5, C-Block, Above IOB Bank, Sec-31,Noida-201301(UP) India • 0120-4317229 • +91-8744000555 • admin@robomart.com • www.robomart.com