University Physics: Mechanics

University Physics: Mechanics Ch5. Newton’s Law of Motion Lecture 6 Dr.-Ing. Erwin Sitompul http://zitompul.wordpress.com

Announcement Industrial Engineering (IE) 18.11.09 17.30–18.30 : Class session 19.00–20.15 : Quiz 2 25.11.09 17.30–18.30 : Class session & Make-up Quiz 2 19.00–20.15 : Discussion Quiz 2 02.12.09 17.30–18.30 : Class session 19.00–20.15 : Quiz 3 09.12.09 17.30–18.30 : Discussion & Make-up Quiz 3 : 16.12.09 18.30–20.30 : Final Examination University Physics: Mechanics

Announcement Information Technology (IT) 20.11.09 17.30–18.30 : Class session 19.00–20.15 : Quiz 2 27.11.09 Eid al-Adha (No class) 04.12.09 17.30–18.30 : Class session & Make-up Quiz 2 19.00–20.15 : Discussion Quiz 2 20.15–20.45 : Quiz 3 11.12.09 17.30–18.30 : Class session & Make-up Quiz 3 19.00–20.15 : Discussion Quiz 3 18.12.09 18.30–20.30 : Final Examination University Physics: Mechanics

What Causes an Acceleration? • Out of common experience, we know that any change in velocity must be due to aninteraction between anobject (a body) and something in its surroundings. • An interaction that can cause an acceleration of a body is called a force. Force can be loosely defined as a push or pull on the body. • The relation between a force and the acceleration it causes was first understood by Isaac Newton. • The study of that relationship is called Newtonian mechanics. • We shall now focus on its three primary laws of motion. Sir Isaac Newton (1642—1727) University Physics: Mechanics

Newton’s First Law • Newton’s First Law: “If no force acts on a body, then the body’s velocity cannot change, that is the body cannot accelerate.” • In other words, if the body is at rest, it stays at rest. If the body is moving, it will continue to move with the same velocity (same magnitude and same direction). University Physics: Mechanics

Force • A force can cause the acceleration of a body. • As the standard body, we shall use the standard kilogram. It is assigned, exactly and by definition, a mass of 1 kg. • We put the standard body on a horizontal frictionless surface and pull the body to the right, so that it eventually experiences an acceleration of 1 m/s2. • We can now declare, as a matter of definition, that the force we are exerting on the standard body has a magnitude of 1 newton (1 N). University Physics: Mechanics

Force • Forces are vector quantities. They have magnitudes and directions. • Principle of Superposition for Forces: A single force with the magnitude and direction of the net force acting on a body has the same effect as all the individual forces acting together. • Newton’s First Law: (proper statement)“If no net force acts on a body , then the body’s velocity cannot change, that is the body cannot accelerate.” University Physics: Mechanics

Net Force Calculation using Vector Sum University Physics: Mechanics

Checkpoint Which of the following six arrangements correctly show the vector addition of forces and to yield the third vector, which is meant to represent their net force ? University Physics: Mechanics

Mass • Mass is a scalar quantity. • Mass is an intrinsic characteristic of a body. • The mass of a body is the characteristic that relates a force on the body to the resulting acceleration. • A physical sensation of a mass can only be obtained when we attempt to accelerate the body. University Physics: Mechanics

Newton’s Second Law • Newton’s Second Law: “The net force on a body is equal to the product of the body’s mass and its acceleration.” • The Newton’s second law in equation form • It the net force on a body is zero, then the body’s acceleration is zero • If the body is at rest, it stays at rest. • If it is moving, it continues to move at constant velocity. University Physics: Mechanics

Newton’s Second Law • The vector equation is equivalent to three component equation, one written for each axis of an xyz coordinate system: • The acceleration component along a given axis is caused only by the sum of the force components along that same axis, and not by force components along any other axis. University Physics: Mechanics

Free-Body Diagram • The most important step in solving problems involving Newton’s Laws is to draw the free-body diagram. • Only the forces acting on the object of interest should be included in a free-body diagram. Fon book from hand Fon book from earth University Physics: Mechanics

Free-Body Diagram The system of interest is the cart The free-body diagram of the cart University Physics: Mechanics

Example: Puck (Ice Hockey “Ball”) Three situations in which one or two forces act on a puck that moves over frictionless ice along an x axis, in one-dimensional motion, are presented here. The puck’s mass is m = 0.2 kg. Forces F1 and F2 are directed along the axis and have magnitudes F1 = 4 N and F2 = 2 N. Force F3 is directed at angle θ = 30° and has magnitude F3 = 1 N. In each situation, what is the acceleration of the puck? → → → University Physics: Mechanics

Example: Puck (Ice Hockey “Ball”) The puck’s mass is m = 0.2 kg. Forces F1 and F2 are directed along the axis and have magnitudes F1 = 4 N and F2 = 2 N. Force F3 is directed at angle θ = 30° and has magnitude F3 = 1 N. University Physics: Mechanics

Some Particular Forces • The Gravitational Force The gravitational force Fg on a body is a force that pulls on the body, directly toward the center of Earth (that is, directly down toward the ground. → • The Weight The weight W of a body is equal to the magnitude Fg of the gravitational force on the body University Physics: Mechanics

Some Particular Forces • The Normal Force When a body presses against a surface, the surface (even a seemingly rigid one) deforms and pushes back on the body with a normal force FN that is perpendicular to the surface. • In mathematics, normal means perpendicular. → According to Newton’s second law, • Why? Forces on A Body, Resting on A Table University Physics: Mechanics

Some Particular Forces • Friction The frictional force or simply friction is a force f that resists the motion when we slide or attempt to slide a body over a surface. • Friction is directed along the surface, opposite the direction of the intended motion. → University Physics: Mechanics

Some Particular Forces • Tension When a cord (or a rope, cable, or other such object) is attached to a body and tensed, the cord pulls on the body with a force T directed away from the body. • The force is often called a tension force. The tension in the cord is the magnitude T of the force on the body. → → • A cord is considered as massless and unstretchable • A pulley is considered as massless and frictionless University Physics: Mechanics

Newton’s Third Law • Newton’s Third Law: “When two bodies interact, the forces on the bodies from each other are always equal in magnitude an opposite in direction.” (Equal Magnitudes) (Equal Magnitudes and Opposite Directions) : The force on the book B from the box C : The force on the box C from the book B University Physics: Mechanics

Applying Newton’s Law: Problem 1 A block S (the sliding block) with mass M =3.3 kg is free to move along a horizontal frictionless surface. It is connected by a cord that wraps over a frictionless pulley, to a second block H (the hanging block) with mass m = 2.1 kg. The cord and pulley are considered to be “massless”. The hanging block H falls as the sliding block S accelerate to the right. Find: (a) the acceleration of block S (b) the acceleration of block H (c) the tension in the cord University Physics: Mechanics

Applying Newton’s Law: Problem 1 The Forces Acting On The Two Blocks Free-Body Diagram for Block S and Block H University Physics: Mechanics

1 2 1 2 Applying Newton’s Law: Problem 1 • The cord does not stretch, so ax of M and ay of m have the same magnitude. • The tension at M and the tension at m also have the same magnitude • Why? University Physics: Mechanics

Applying Newton’s Law: Problem 1 (a) the acceleration of block S (b) the acceleration of block H (c) the tension in the cord University Physics: Mechanics

Applying Newton’s Law: Problem 2 A cord pulls on a box of sea biscuits up along a frictionless plane inclined at θ = 30°. The box has mass m = 5 kg, and the force from the cord has magnitude T = 25 N. What is the box’s acceleration component a along the inclined plane? Free-Body Diagram of the Box Free-Body Diagram, Fg in components → University Physics: Mechanics

Applying Newton’s Law: Problem 2 • What is the meaning of this value? What is the force exerted by the plane on the box? No motion in • y direction University Physics: Mechanics

Homework 5: Two Boxes and A Pulley A block of mass m1 = 3.7 kg on a frictionless plane inclined at angle θ = 30° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.3 kg. What are: (a) the magnitude of the acceleration of each block, (b) the direction of the acceleration of the hanging block, and (c) the tension in the cord? Hint: Draw the free-body diagram of m1 and m2 first. University Physics: Mechanics

University Physics: Mechanics