80 likes | 90 Views
Here by going through this presentation you would come across some Important guidelines for Split AC Installation.<br><br>For more details visit here:<br><br>https://www.oldmateact.com.au/services/air-conditioning-canberra/<br>
E N D
Important Guidelines for Split AC Installation The installation of the split air conditioners is a crucial job. Accurately installed air conditioner will give optimum cooling. If it is not done properly, you won’t get the desired cooling effect. Poor air conditioning installation Canberra leads to frequent maintenance problems. https://www.oldmateact.com.au/
Important Factors to Consider During the Installation of Split Air Conditioner Strength of Wall to Hold the AC: • The indoor unit of the split AC must be installed on a wall strong enough • Proper spacing between wall and AC unit • The indoor unit of the split AC requires at least 15 cm of open space surrounding https://www.oldmateact.com.au/
Appropriate Installation Height From Ground: • Experts of reverse cycle air conditioning service say that the indoor unit of the split AC should be installed at a height of 7-8 feet above the ground • There should be adequate cooling inside the room https://www.oldmateact.com.au/
Correct Tilt Angle of Indoor Unit: • Slight angle is needed to ensure unrestricted flow of the condensed water from the drain pipe https://www.oldmateact.com.au/
Correct Location of Outdoor Unit: • Proper cooling is ensured only when indoor and outdoor units of split AC are located away from direct sunlight and water • Install the outdoor unit of the split AC in open space so that there is no hindrance to the heat dissipated from the condenser https://www.oldmateact.com.au/
Proper Placement of Outdoor Unit: • An outdoor unit of the split AC must be placed on a flat and rigid surface • Outdoor unit has some key components of the split AC like compressor, condenser, fan motor, etc. • If not on a flat surface, it will vibrate excessively • This will lead to the breakage of copper pipes, coolant leakage and compressor/condenser damage https://www.oldmateact.com.au/
Oldmate ACT Pty Ltd https://www.oldmateact.com.au/ E-Mail: office@oldmateact.com.au tim@oldmateact.com.au Office: 02 6254 6576 https://www.oldmateact.com.au/