120 likes | 220 Views
Simulation Setup. FL Full buffer simulation All the parameters and methods for the simulations follow both the parameter spread sheet in C30-20080416-001 and the output metrics spread sheet in C30-20080114-021R2 Note: Effective SNR AWGN curves (C30-20080114-029) is used.
E N D
Simulation Setup • FL Full buffer simulation • All the parameters and methods for the simulations follow both the parameter spread sheet in C30-20080416-001 and the output metrics spread sheet in C30-20080114-021R2 • Note: • Effective SNR AWGN curves (C30-20080114-029) is used. • The PER curves for 8 tiles are used. • The backoff (C30-20080114-033R1, PedB3 case) is applied. • Capacity curves (C30-20071105-013) is used. • ITU Model (TU3) as the channel model • BRCH for F-DCH • CQI Mapping (for PF Selection): C30-20071203-020R2 • AT Layout: C30-20080416-002 • FLCS power is considered. • Scheduler: in line with the pseudo code in C30-20080331-031R1 • The value for CDF is the left (=min) value of bin.
TU3 channel • Aggregate sector throughput Average throughput: 12.44Mbps Edge user throughput: 455.3kbps
TU3 channel • PER distribution
TU3 channel • Normalized per user average throughput
TU3 channel • Average PHY throughput per AT vs. Geometry
TU3 channel • HARQ statistics (distribution)
TU3 channel • Packet format selection distribution
TU3 channel • CDF of AT Throughput
Appendix ~ Output Metrics Spread Sheets ~ • TU3 channel