250 likes | 359 Views
GAPSS G eothermal A rea P assive S eismic S ources Sismicità associata allo sfruttamento del campo geotermico di Larderello-Travale G. Saccorotti, D. Piccinini. Enhanced Geothermal Systems (EGS).
E N D
GAPSS Geothermal Area Passive Seismic Sources Sismicità associata allo sfruttamento del campo geotermico di Larderello-Travale G. Saccorotti, D. Piccinini
Enhanced Geothermal Systems (EGS) • Is a subsurface heat exchanger designed to improve and potentially expand the heat extraction operations so that they become more economic; • Most commonly, an EGS is needed wherever the reservoir rocks are hot but their permeability is low. In such systems, permeability may be enhanced by hydraulic fracturing, high-rate water injection, and/or chemical stimulation; Hydrofracturing when fluid injection > rock fracture gradient → tensile failure occurs Failure should end when the pressure is < rock fracture gradient Injection pressure < rock fracture gradient → can also induce seismicity (low magnitude – 4.6 Geysers 1980's)
Mechanisms of induced seismicity in EGS • Pore pressure increase: increase fluid pressure can decrease static friction → seismic slip. High number of MEQ occur as the pressure migrates away from the well.. • Temperature decrease: Cool fluids can cause contraction of fracture surfaces (thermoelastic strain) → slight open of fracture reduce the static friction promoting slip. Alternatively, contraction can cause new fractures (non double-couple mechanism). • Volume change due to fluid injection: cause a perturbation in local stress conditions close to the failure state → seismic slip • Chemical alteration: injecting non-native fluids (or allowing “outside fluids” to flow into reservoir) may cause geochemical alteration of fracture surface changing the friction coefficient (barriers became asperities?) • Stress condition (orientation and size of deviatoric stress in relation to faults) • Extent of the faults • Rock mechanical properties • Hydrological factors • Hystorical natural seismicity
Mechanisms of induced seismicity in EGS • Pore pressure increase: increase fluid pressure can decrease static friction → seismic slip. High number of MEQ occur as the pressure migrates away from the well.. • Temperature decrease: Cool fluids can cause contraction of fracture surfaces (thermoelastic strain) → slight open of fracture reduce the static friction promoting slip. Alternatively, contraction can cause new fractures (non double-couple mechanism). • Volume change due to fluid injection: cause a perturbation in local stress conditions close to the failure state → seismic slip • Chemical alteration: injecting non-native fluids (or allowing “outside fluids” to flow into reservoir) may cause geochemical alteration of fracture surface changing the friction coefficient (barriers became asperities?) • Stress condition (orientation and size of deviatoric stress in relation to faults) • Extent of the faults • Rock mechanical properties • Hydrological factors • Hystorical natural seismicity
THE GAPSS EXPERIMENT GAPSS is a passive seismic experiment which began as of early May, 2012. It is intended to last until summer 2013. Its main goal is to verify the resolving power of passive exploration techniques in an area where the subsurface geological structures are well known → i.e., the Larderello Travale Geothermal field (LTGF). GAPSS involves the cooperative efforts of INGV personnel from Pisa, CNT and RM1. Most of the Instruments have been provided by Co.Re.Mo @ CNT
SEISMICITY AT LTGF 1978-1982 [Batini et al., 1985] EQ rate: 5-60 eqs / months 60 50 40 'In the early 1970s, injection of cold condensate from the power plants was initiated in order to recharge the upper reservoir [...]. The area has a long history of seismicity, and therefore many, if not most of the events are likely to be natural' [Evans et al., Geothermics 41 (2012) 30–54]
SEISMICITY & INJECTION 1978-1982 [Batini et al., 1985] EQ RATE MAX MAG INJECTION 'The production history of the Larderello-Travale geothermal field is so complex that few quantitative data are available for the productive and reinjection wells'' [Batini, Console & Luongo, Geothermics (1985) ]. Nonetheless, it is clear that: - Seismicity rate correlates positively with amount of injected fluids; - Max magnitudes correlates negatively with amount of injected fluids;
SIGNAL DETECTION & ANALYSIS 1. STA / LTA detection algorithm (all stations) 2. TRIGGER with coincidence sum 3. VISUAL INSPECTION 4. MANUAL PICKING 5. LOCATION (LIN & NON-LIN)
THE GAPSS CATALOG 15 May 2012 – 30 Sept. 2012: 948 locations, ~ 460 class A & B - 1D Vp/Vs model suggest strong lateral heterogeneities; - High B-value as expected for geothermal fields - Seismicity rate 5.25 ev/day!!!
CROSS-SECTIONS K-Horizon L T K-Horizon follows the 450° isotherm. Fractured level filled by supercritical fluids (Batini et al., 1983) OR Fragile-Ductile transition level containing fluids overpressure (Brogi et al., 2003)
A TYPICAL DAY OF LTGF SEISMICITY 1 day Conventional event detection algorithms obviously fail in grabbing most of the events 1000 s 100 s 100 s
CLUSTER ANALYSIS MASTER STATION: LA12 (largest number of time readings) 4-s-long time window, start 1s before Tp 2-20 Hz frequency band EXCLUSIVE, 'CLOSED' CLUSTER algorithm w/ min 5 events CORRELATION THRESHOLD @ 0.8 10 clusters (max 23 events)
MATCHED FILTERING For each cluster: selection of the largest event as a template waveform; Slide the template along the continuous recording and compute cross-correlation; Store events for which max[xcorr] > 0.75
SAMPLE RESULTS: JUNE 2, 2012 Two closely-spaced clusters exhibit marked differences in the time recurrence of failure: Omori's law vs constant rate. Constant Rate Omori's Law
CLUSTER AND ACTIVE WELLS LOCATIONS 10 km Location of the clusters (circles) and of the active wells (red dots). White arrows are wells where reinjection occurs (source: Ministry of Industry and Economical Development).
Kinematic of Rayleigh Waves Rayleigh wave polarisation is oriented perpendicularly to the main fault system of the area → maximisation of the triggering potential. Multichannel analysis serves to infer the seismic velocity of the medium to be used for stress calculation. Multichannel analysis serves to infer the seismic velocity of the medium to be used for stress calculation.
The dynamic stress field Stress fields as a function of time and depth for a 10 s Rayleigh wave with a max amplitude of 1 mm. (a) Vertical displacement seismogram. (b) Horizontal normal stress. (c) Vertical normal stress. (d) Shear stresses. Positive = extensional Negative = compressional.
The dynamic stress field • Interpolation of seismic recordings allows deriving the actual ground motion at the triggered hypocenters, which is eventually transformed into stress values. • Failure occurred with dynamic stresses as low as 5 Kpa • Faults must have been already very close to failure • High pore fluid pressure • Triggered depths are consistent with location of the K-horizon !
Threshold on Triggering Gomberg and Davis, JGR, 1996 Empirical Magnitude – distance triggering threshold relationship found at The Geysers Geothermal Field, California These 2 earthquakes were recorded with amplitudes differing by a factor of ~4. Is this enough to inherit triggering ? Or rather the time in between them (9 days) was shorter than the 'recharge time' of faults? 2012 05 20 Mw=5.9 2012 05 29 Mw=5.8