DEWG CAP 9/30/00

1. NATNPX138N VHF-FM RadioPart II Advanced User Trainingon the use of Scanning, Priority, and Direct Frequency / Channel Editing DEWG CAP 9/30/00 DAFB Air Mobility Command Museum Dover, Delaware

2. This is the Advanced Training for use of the NPX-138 from Northern Airborne Technology • Specific assumptions are made that the student understands the purpose of certain VHF-FM specific matters [such as CTCSS tones], and is comfortable with prior instruction on general use as covered under Part I of this user training series • It is assumed for the purposes of this advanced training that the operator/student has at least some experience with frequency agile radios • Examples of such are aviation band comm radios or certain VHF-FM applications [Page Up] orNEXT [Page Up] orNEXT Remember, this means you may press any key to continue

3. Proceed further if you desire information on Channel Scanning, Priority Scanning, and in-the-field frequency entry. Do so only if you feel entirely confident with the preceding material under Part I, the Basic NPX-138N User Training. [[Page Up] orNEXT

4. Review One makes display selections by means of 4 toggle switches. Many radios will arrive with the default screen shown here. Your radio can be re-programmed to come on and go directly to the channel position of your choice. For now, let’s assume this is what you see…. Most references to adjustments will be with respect to one or more of these switches. [Page Up] orNEXT [Page Up] orNEXT

5. Review “NEXT” • IF your radio does power up with this screen, simply move the “NEXT” {Brightness} toggle to the left or right • We now see the normal operating screen [Page Up] orNEXT [Page Up] orNEXT

6. Review X X X “And how, exactly, do I do that?”, you ask. • The EDIT switch is normally centered so that important settings don’t get messed up • You can, however, make corrections to TONE, POWER, SIMPLEX/DUPLEX, SCAN & PRIORITY choices by this means • You can, however, make corrections to TONE, POWER, SIMPLEX/DUPLEX, SCAN & PRIORITY choices by this means • You can, however, make corrections to TONE, POWER, SIMPLEX/DUPLEX, SCAN & PRIORITY choices by this means • You can, however, make corrections to TONE, POWER, SIMPLEX/DUPLEX, SCAN & PRIORITY choices by this means • You can, however, make corrections to TONE, POWER, SIMPLEX/DUPLEX, SCAN & PRIORITY choices by this means • You can, however, make corrections to TONE, POWER, SIMPLEX/DUPLEX, SCAN & PRIORITY choices by this means [Page Up] orNEXT [Page Up] orNEXT

7. Setting Options • The important mode selections are STEPPED through, one at a time, by moving the EDIT switch to the right -- to the STep position • The important mode selections are STEPPED through, one at a time, by moving the EDIT switch to the right -- to the STep position [Page Up] orNEXT

8. Setting Options • The important selections are STEPPED through, one at a time, by moving the EDIT switch to the right -- to the STep position • The EDIT switch in this position changes the mode of these other two switches to NEXT and SELECT, as labeled below them • The EDIT switch in this position changes the mode of these other two switches to NEXT and SELECT, as labeled below them • The EDIT switch in this position changes the mode of these other two switches to NEXT and SELECT, as labeled below them • The EDIT switch in this position changes the mode of these other two switches to NEXT and SELECT, as labeled below them [Page Up] orNEXT

9. Setting Options • Toggling the switch labeled NEXT takes you through the different modes or settings which can be adjusted, such as Power, Tones, Scan, etc • These settings are “global” - They affect all channels, not just the one displayed at the time [Page Up] orNEXT

10. Setting Options • The SELECT toggle makes the desired change, such as (selection) On, (selection) Off, or setting High or Low, etc • The key is knowing what it is you want or need [Page Up] orNEXT

11. Setting Options “SELECT” “NEXT” • So we know now that we can change various parameters by running thru them one at a time with the NEXT switch • So we know now that we can change various parameters by running thru them one at a time with the NEXT switch • And we know we can execute the change by toggling the SELECT switch. • And we know we can execute the change by toggling the SELECT switch. [Page Up] orNEXT [Page Up] orNEXT

12. Setting Options • The Transmit mode should be left in DUPLEX, so that repeater channels will work. Duplex channels use one frequency for transmit and another for receive • The first variable which comes up is the Simplex/Duplex selection • The next variable in this sequence is the POWER OUTPUT with a choice of HI, which is 10 Watts of power (max allowed in CAP air service), or LO, which is 1 Watt • One usually thinks of Simplex operation as direct, radio-to-radio contact, while Duplex is most often associated with repeater use • Channels meant to be “Simplex” , such as 1 thru 4, have been programmed with TX and RX the same so they will act as simplex channels just fine [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

13. Setting Options • The TONES selection is the next variable • You recall from ROA training that a “channel” is comprised of 1) a radio frequency, and, 2) a sub-audible note, or tone, which rides underneath the voice audio and opens up other radios’ receivers • The choices for the TONES setting are: ON, OFF, or TX ONLY. Leave “ON” for most general use • IF you need to hear a channel without your receiver tone filter on, “TX ONLY” does this. Don’t ever set to “TONES=OFF”. This cuts TX tones as well & you’ll forget, leaving it unusable for future air crews. [Page Up] orNEXT [Page Up] orNEXT

14. Setting Options • The next changeable option is the TONE DISPlay. • The TONE DISPlay mode determines how that tone is labeled, for programming or reference purposes • In order to explain it’s significance, take a look at the main screen again, in this DISPlay mode • Choices are the audio frequency itself, such as 100.0, or the EIA# such as “12”, or other nomenclatures used by the Motorola or Wulfsberg companies • Assume you’re now in the RX Display mode [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

15. Setting Options • We refer to tone types in both simplex and repeater service by their frequency - 156.7 Hz, 203.5 Hz, etc • This will become important if you should need to install other users’ channels in the field [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

16. Setting Options • The next selectable options are the SCAN bank designator and the PRIORITY selector • These two functions and their set-up are related, so we’ll cover them together in just a moment • So, “TONE DISPlay” is simply a choice of ways to refer to the CTCSS tones you may need to enter in the field • Let’s go back to the STep SELECTion we just left, showing the TONE DISP option and continue from there…... [Page Up] orNEXT [Page Up] orNEXT

17. Setting Options • Another selection along in the Step process lets you choose the channel you see when you POWER-UP the radio [Page Up] orNEXT

18. Setting Options Once all of the STepped variables have been set, return the EDIT switch to the center position. Consider leaving all settings as show above: Verify that you left : • We didn’t go through all selections possible within each variable option category • Most people won’t need to change any of these aforementioned selections, but it’s good to know how to do so in the field or on a mission POWER = HI DISPlay Switch = ID Channel = Air to Ground or as directed by your local command SCAN Switch = Normal Guard1/Guard2 = G1 or as directed by local command EDIT Switch = <Centered> TONES = ON [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

19. Advanced User Training • OK, let’s cover Channel Scan and Priority • Scanning is the process of allowing the radio to listen to many channels in a repeating sequence • The receiver stops on a channel if it’s in use, so you can hear if there’s traffic of interest to you [Page Up] orNEXT

20. Advanced User Training SC • The display, in ID DISPlay mode, will show “SC“to the right of the Channel Name if it’s on the Scan List • If you choose to use the SCAN feature, first put your radio on the primary Channel you’re going to be working • Then, move the SCAN/NORM switch upwards and the radio will begin scanning channels [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

21. Advanced User Training SC • If the “home channel” becomes busy, the receiver will revert back there for you • If a channel becomes a nuisance, toggle the CHANnel switch to “ - ” to make the radio ignore that channel • This temporary bypass request is reset once you leave the SCAN mode, or if you power off the radio [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

22. Advanced User Training SC PI • In addition to being on the normal Scan list , certain channels can be designated as Priority channels • You’ll see a PIor P2to the right of the Channel Name if this channel was programmed as a Priority channel • If a Priority channel becomes active while you’re scanning, the radio will go to the priority channel [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

23. Advanced User Training SC PI = • This is NOT the same as a guard channel. A scanned channel is monitored in sequence; A Guard channel is monitored simultaneously regardless of other activities • This is NOT the same as a guard channel. A scanned channel is monitored insequence; A Guard channel is monitored simultaneously regardless of other activities • This is NOT the same as a guard channel. A scanned channel is monitored insequence; A Guard channel is monitored simultaneously regardless of other activities • A channel is made a Priority channel at the time of programming; This can be changed in the field by persons who know how to edit or enter channels in the field [Page Up] orNEXT [Page Up] orNEXT

24. Advanced User Training SC PI 3 2 1 “NEXT” • We now know that there is a batch of channels listed in a main Scan group, and that there are certain ones among this group which are Priority selections 1. Move the EDIT/STep switch to the right 2. Use the NEXT toggle to find the SCAN options (Note that at present, only the normal scan list is chosen) • How do we decide if we want to simply scan those in the Scan group batch, or if we want to be interrupted by Priority channels as well? 3. SELECT whether to scan just the LIST of scan-channels, or if you want the scan-LIST and the PRIority feature to be engaged [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT [Page Up] orNEXT

25. Advanced User Training SC PI SC PI SC PI SC PI SC PI • The use of scanning is a subject best covered in detail under self-study in front of the radio with the manual • Please avail yourself of this time-honored training technique [Page Up] orNEXT

26. BREAK Please take a 15 Minute recess before continuing with this program Please load the file NPX138 2of2 Advanced Training.ppt for the rest of this training session. Please load the file NPX138 2of2 Advanced Training.ppt for the rest of this training session. Please load the file NPX138 2of2 Advanced Training.ppt for the rest of this training session.