1 / 8

MTC 故障處理

MTC 故障處理. 檢查各感應器是否正常﹐各硬件是否變形。 對 MTC 進行校正。 一般情况是 FEEDE 轴. MTC 校正. 1.將右介面下 positions 里的 zero point correction 紀錄並將其設置為 0.設置 OK 後, reference run. 設為 0. 2. teach zero point. 3. TEACH FEEDER 零點

quentin-hahn
Download Presentation

MTC 故障處理

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MTC 故障處理 • 檢查各感應器是否正常﹐各硬件是否變形。 • 對MTC進行校正。 • 一般情况是FEEDE轴

  2. MTC校正 1.將右介面下 positions 里的 zero point correction 紀錄並將其設置為 0.設置 OK 後, reference run. 設為 0

  3. 2. teach zero point

  4. 3.TEACH FEEDER零點 1). 將所需 calibration tower 的安全門 by pass,將 cassette 2 .3 .4 .5 取出,剩下 cassette 1 及第一層tray 盤(以便觀察掛勾和 tray 的位置); 2.) 利用右界面中的方向件調整掛勾的位置,首先向一個方向逐步動作,(動作的單位一般為 0.1mm) 動作一次點击一次 ''engage'',當掛勾卡第一次卡到盤的時候,繼續向前並紀錄前進的次數直到卡不到為止; 3.)用同樣的單位(0.1mm)反方向動作,其動作的次數為記錄次數的一半,選取OK 後,點击 ACCEPT,OK.

  5. 寫入 zero point 值 • 5.將 teach zero point 的值(校正cassette1的值)寫入 zero point correction ,reference run 後,再 teach + - limit switch position

  6. 6. teach limit position 分別點击 ‘’limit switch - limit switch + “即可﹐讓其自動數據保存。

  7. 7. teach transfer position 1) 確認 LEVLE 1 上有 tray 盤後,點击右介面中 ‘’OK ‘’.LEVEL 1 上的 Tray 盤將被送出到 Tray 盤傳軌邊緣. 2)打開機蓋將 tray 盤的位置調整到和傳軌的邊緣平齊,確認位置好後,關閉機蓋,點击右介面中的 OK,再點击 ''update position"

  8. 8.插入軟盤,點击右介面中的 saving MTC machine date………即可.

More Related