1 / 8

Volume Meshing with Mimics

Volume Meshing with Mimics. Subha Srinivasan Feb 9 th , 2009. Procedure. Create Masks Make 3-D surface from mask Open remesher (FEA tab) and select the 3-D you want to make mesh from

quin-elliott
Download Presentation

Volume Meshing with Mimics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Volume Meshing with Mimics Subha Srinivasan Feb 9th, 2009

  2. Procedure • Create Masks • Make 3-D surface from mask • Open remesher (FEA tab) and select the 3-D you want to make mesh from • Remesher will show the surface mesh. Inspect its quality. Typical shape measure used is Height to Base (N): should be greater than 0.3. • Auto remesh (under remesher) to achieve quality of surface desire. (this is important since volume mesh works off of surface) • Hit create volume mesh on remesher • Status is shown on log window. If there are any errors in surface, this will show. In which case, use fixing tab to fix errors (mostly automated) • Create volume mesh, give edge length and analysis parameter (recommended: aspect ratio to be 25)

  3. Surface Mesh in Remesher

  4. Surface Mesh in Remesher

  5. Viewing Volume Mesh • Go to 3-D view in remesher, and use sectioning tab to view volume mesh • Close remesher, volume mesh should be visible in mimics under FEA tab • Materials can be tagged with mimics and exported in desired format

  6. Volume Mesh

More Related