1 / 59

Linear Momentum

Linear Momentum. Unit 5. F 21 + F 12 = 0. (Newton’s Third Law). m 1 a 1 + m 2 a 2 = 0. (Newton’s Second Law). dv 1. dv 2. m 1. m 2. +. = 0. dt. dt. d(m 1 v 1 ). d(m 2 v 2 ). +. = 0. dt. dt. Lesson 1 : Linear Momentum and Its Conservation.

quincy
Download Presentation

Linear Momentum

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Linear Momentum Unit 5

  2. F21 + F12 = 0 (Newton’s Third Law) m1a1 + m2a2 = 0 (Newton’s Second Law) dv1 dv2 m1 m2 + = 0 dt dt d(m1v1) d(m2v2) + = 0 dt dt Lesson 1 : Linear Momentum and Its Conservation

  3. sum of linear momentum is constant p = mv (linear momentum) d (m1v1 + m2v2) = 0 dt Linear momentum is a vector quantity whose direction the same as the direction of v. Its SI unit is kg . m/s.

  4. dv d(mv) dp SF = = dt dt The time rate of change of the linear momentum of a particle is equal to the net force acting on the particle. SF = ma = m dt (This is the form in which Newton presented his second law.)

  5. Total p before = Total p after Conservation of Linear Momentum Whenever two or more particles in an isolated system interact, the total momentum of the system remains constant. The total momentum of an isolated system at all times equals its initial momentum.

  6. A 60. kg archer stands at rest on frictionless ice and fires a 0.50 kg arrow horizontally at 50. m/s. Example 1 a) With what velocity does the archer move across the ice after firing the arrow.

  7. b) What if the arrow were shot in a direction that makes an angle q with the horizontal ? How will this change the recoil velocity of the archer ?

  8. Two blocks of masses M and 3M are placed on a horizontal, frictionless surface. A light spring is attached to one of them, and the blocks are pushed together with the spring between them. A cord initially holding the blocks together is burned, and the 3M block moves to the right with a speed of 2.00 m/s. Example 2

  9. a) What is the speed of the block of mass M ? b) Find the original elastic potential energy in the spring if M = 0.350 kg.

  10. A swing seat of mass M is connected to a fixed point P by a massless cord of length L. A child also of mass M sits on the seat and begins to swing with zero velocity at a position at which the cord makes a 60o angle with the vertical as shown in Figure I. The swing continues down until the cord is exactly vertical at which time the child jumps off in a horizontal direction. Example 3 : AP 1981 #2

  11. 2 3 2 2 The swing continues in the same direction until the cord makes a 45o angle with the vertical as shown in Figure II; at that point it begins to swing in the reverse direction. With what velocity relative to the ground did the child leave the swing ? (cos 45o = sin 45o = , sin 30o = cos 60o = ½, cos 30o = sin 60o = )

  12. d(mv) dp SF = = dt dt tf ò Dp = pf – pi = F dt Impulse (I) tf ti ò I = F dt ti Lesson 2 : Impulse and Momentum dp = F dt Integrating F with respect to t,

  13. Impulse has a magnitude equal to the area under the force-time graph. Impulse is a vector quantity with the same direction as the direction of the change in momentum.

  14. I = FDt Because the force imparting an impulse can generally vary in time, we can express impulse as

  15. The impulse of the force F acting on a particle equals the change in the momentum of the particle. tf ò Dp = pf – pi = F dt ti I = Dp Impulse – Momentum Theorem

  16. In a particular crash test, a car of mass 1500 kg collides with a wall, as shown. The initial and final velocities of the car are vi = -15.0i m/s and vf = 2.60i m/s, respectively. ^ ^ Example 1

  17. a) If the collision lasts for 0.150 s, find the impulse caused by the collision and the average force exerted on the car.

  18. b) What if the car did not rebound from the wall ? Suppose the final velocity of the car is zero and the time interval of the collision remains 0.150 s. Would this represent a larger or a smaller force by the wall on the car ?

  19. A 3.00 kg steel ball strikes a wall with a speed of 10.0 m/s at an angle of 60.0o with the surface. It bounces off with the same speed and angle. If the ball is in contact with the wall for 0.200 s, what is the average force exerted by the wall on the ball ? Example 2

  20. An estimated force-time curve for a baseball struck by a bat is shown above. From this curve, determine Example 3 a) the impulse delivered to the ball

  21. b) the average force exerted on the ball c) the peak force exerted on the ball

  22. Elastic Collisions Inelastic Collisions The total KE (as well as total momentum) of the system is the same before and after the collision. The total KE of the system is not the same before and after the collision (even though the momentum of the system is conserved). KE is conserved KE is not conserved Lesson 3 : Collisions in One-Dimension “perfectly inelastic” “inelastic”

  23. m1v1i + m2v2i = (m1 + m2)vf Perfectly Inelastic Collisions when the colliding objects stick together

  24. Elastic Collisions m1v1i + m2v2i = m1v1f + m2v2f ½ m1v1i2 + ½ m2v2i2 = ½ m1v1f2 + ½ m2v2f2

  25. Example 1 An 1800 kg car stopped at a traffic light is struck from the rear by a 900 kg car, and the two become entangled, moving along the same path as that of the originally moving car. a) If the smaller car were moving at 20.0 m/s before the collision, what is the velocity of the entangled cars after the collision ?

  26. b) Suppose we reverse the masses of the cars – a stationary 900 kg car is struck by a moving 1800 kg car. Is the final speed the same as before ?

  27. The ballistic pendulum is an apparatus used to measure the speed of a fast-moving projectile, such as a bullet. A bullet of mass m1 is fired into a large block of wood of mass m2 suspended from some light wires. The bullet embeds in the block, and the entire system swings through a height h. How can we determine the speed of the bullet from a measurement of h ? Example 2

  28. A block of mass m1 = 1.60 kg initially moving to the right with a speed of 4.00 m/s on a frictionless horizontal track collides with a spring attached to a second block of mass m2 = 2.10 kg initially moving to the left with a speed of 2.50 m/s. The spring constant is 600 N/m. Example 3

  29. a) Find the velocities of the two blocks after the collision.

  30. b) During the collision, at the instant block 1 is moving to the right with a velocity of +3.00 m/s, determine the velocity of block 2.

  31. A 5 kg ball initially at rest at the edge of a 2 m long, 1.2 m high frictionless table, as shown above. A hard plastic cube of mass 0.5 kg slides across the table at a speed of 26 m/s and strikes the ball, causing the ball to leave the table in the direction in which the cube was moving. Example 4 : AP 1995 #1

  32. The figure below shows a graph of the force exerted on the ball by the cube as a function of time. a) Determine the total impulse given to the ball.

  33. b) Determine the horizontal velocity of the ball immediately after the collision. c) Determine the following for the cube immediately after the collision. i. Its speed ii. Its direction of travel (right or left), if moving

  34. d) Determine the kinetic energy dissipated in the collision. e) Determine the distance between the two points of impact of the objects with the floor.

  35. A 2 kg block and an 8 kg block are both attached to an ideal spring (for which k = 200 N/m) and both are initially at rest on a horizontal frictionless surface, as shown in the diagram above. In an initial experiment, a 100 g (0.1 kg) ball of clay is thrown at the 2 kg block. The clay is moving horizontally with speed v when it hits and sticks to the block. The 8 kg block is held still by a removable stop. As a result, the spring compresses a maximum distance of 0.4 m. Example 5 : AP 1994 #1

  36. a) Calculate the energy stored in the spring at maximum compression. b) Calculate the speed of the clay ball and 2 kg block immediately after the clay sticks to the block but before the spring compresses significantly.

  37. c) Calculate the initial speed v of the clay. In a second experiment, an identical ball of clay is thrown at another identical 2 kg block, but this time the stop is removed so that the 8 kg block is free to move. d) State whether the maximum compression of the spring will be greater than, equal to, or less than 0.4 m. Explain briefly.

  38. e) State the principle or principles that can be used to calculate the velocity of the 8 kg block at the instant that the spring regains its original length. Write the appropriate equation(s) and show the numerical substitutions, but do not solve for the velocity.

  39. Lesson 4 : Two-Dimensional Collisions m1v1i = m1v1f cosq + m2v2f cosf 0 = m1v1f sinq - m2v2f sinf

  40. Since this is an elastic collision, KE is also conserved.* ½ m1v1i2 = ½ m1v1f2 + ½ m2v2f2 * If this were an inelastic collision, KE would not be conserved, and this equation does not apply.

  41. Example 1 A 1500 kg car traveling east with a speed of 25.0 m/s collides at an intersection with a 2500 kg van traveling north at a speed of 20.0 m/s. Find the direction and magnitude of the velocity of the wreckage after the collision, assuming that the vehicles undergo a perfectly inelastic collision (that is, they stick together).

  42. Example 2 In a game of billiards, a player wishes to sink a target ball in the corner pocket. If the angle to the corner pocket is 35o, at what angle q is the cue ball deflected ? Assume that friction and rotational motion are unimportant and that the collision is elastic. Also assume that all billiard balls have the same mass m.

  43. Lesson 5 : The Center of Mass Center of mass (CM) is the average position of the system’s mass Center of mass is located on the line joining the two particles and is closer to the particle having the larger mass.

  44. How to Locate the Center of Mass System rotates clockwise when F is applied between the less massive particle and CM. System rotates counterclockwise when F is applied between the more massive particle and CM. System moves in the direction of F without rotating when F is applied at CM.

  45. m1x1 + m2x2 xCM = m1 + m2

  46. m1x1 + m2x2 + m3x3 + …… xCM = m1 + m2 + m3 + …… Smixi Smiyi Smizi xCM = yCM = zCM = M M M Y coordinates of CM Z coordinates of CM Center of mass for a system of many particles

  47. ^ ^ ^ rCM = xCM i + yCM j + zCM k SxiDmi xCM = lim M Dmi 0 Using a Position Vector (r) to locate CM of a system of particles Using a Position Vector (r) to locate CM of an extended object

  48. 1 1 ò ò rCM xCM = = r dm x dm M M (likewise for yCM and zCM)

  49. Suspend the object first from points A and C. Locating CM of an irregularly shaped object CM is where lines AB and CD intersect If wrench is hung freely from any point, the vertical line through this point must pass through CM.

  50. Example 1 A baseball bat is cut at the location of its center of mass. The piece with smaller mass is a) the piece on the right. b) the piece on the left. c) both have same mass. d) impossible to determine.

More Related