1 / 59

STEEPLECHASE TOOL AND DIE ESTIMATING

STEEPLECHASE TOOL AND DIE ESTIMATING. MODEL LC22 ESTIMATING LAYOUT. FLAT BLANK LAYOUT FROM FASTBLANK SOFTWARE. STEEPLECHASE TOOL AND DIE DESIGN FULL SOLID MODEL DESIGN MASTERCAM VER.”X2” WITH DYNA-FORM 3-D SIMULATION WITH LS-DYNA SOLVER. INITIAL PART DESIGN. PART PROCESS LAYOUT.

rania
Download Presentation

STEEPLECHASE TOOL AND DIE ESTIMATING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. STEEPLECHASE TOOL AND DIEESTIMATING

  2. MODEL LC22 ESTIMATING LAYOUT

  3. FLAT BLANK LAYOUT FROM FASTBLANK SOFTWARE

  4. STEEPLECHASE TOOL AND DIEDESIGNFULL SOLID MODEL DESIGNMASTERCAM VER.”X2”WITH DYNA-FORM3-D SIMULATION WITH LS-DYNA SOLVER

  5. INITIAL PART DESIGN

  6. PART PROCESS LAYOUT

  7. COMPLETED DESIGN SOLID MODELING LOWER DIE

  8. COMPLETED DESIGN SOLID MODELING UPPER HALF OF DIE

  9. COMPLETED 3-D SOLID MODELING DESIGN

  10. STEEPLECHASE TOOL AND DIECOMPUTER AIDEDPROGRAMING

  11. CNC PROGRAMING VERIFICATION

  12. STEEPLECHASE TOOL AND DIE CNC MACHININGWITH 4TH AXISCAPABILITIES

  13. 20,000 SQ FT ASSEMBLY & TRYOUT AREA WITH 4 TRYOUT PRESSES WITH COIL HANDELING UP TO 72” WIDTH FOR LINE, PROGRESSIVE, AND TRANSFER TOOLING.

  14. STEEPLECHASE QUALITY ANDCMM DEPARTMENT

  15. EXAMPLES OF TOOLING

  16. YEAR 2008 LC22 CHALLENGER UPPER DOOR PANEL R & LH CAR POSITION

  17. YEAR 2008 LC22 CHALLENGER UPPER DOOR PANEL R & LH

  18. MODEL GMT 345 (2007 H3 HUMMER) ENGINE SHIELD 4.50 THK ALUMINUM

  19. YEAR 2007 MODEL MK74 TROUGH LIFTGATE DRAIN R & LH CAR POSITION

  20. YEAR 2007 MODEL MK74 8 STATION TRANSFER COMPLETE RIGHT AND LEFT HAND. TROUGH LIFTGATE DRAIN RIGHT AND LEFT HAND

  21. YEAR 2007 MODEL JK TRANSFER REINF.-”B” PILLAR R & LH CAR POSITION

  22. YEAR 2007 MODEL JK 8 STATION DOUBLE TRANSFER COMPLETE. REINF.-”B” PILLAR RIGHT AND LEFT HAND

  23. YEAR 2007 MODEL JK CROSSMEMBER R & LH CAR POSITION

  24. YEAR 2007 MODEL JK 10 STATION PROG. DIE CROSSMEMBER R & LH

  25. YEAR 2005 MODEL KJ REINF. HOOD LATCH SUPPORT CAR POSITION

  26. YEAR 2005 MODEL KJ REINF. HOOD LATCH SUPPORT. 10 STATION PROG. COMPLETE

  27. MODEL GMX 245 Z06 CORVETTE UPPER AND LOWER CROSSOVER “X” PIPE CAR POSITION 1.20 MM THICK STAINLESS STEEL STOCK

More Related