Tephigrams

1. Tephigrams ENVI1400 : Lecture 8

2. Tephigrams are thermodynamic diagrams – one of a range of such diagrams developed to help in the visual analysis of atmospheric profiles. • They have the property that equal areas on the diagram represent equal amounts of energy. ENVI 1400 : Meteorology and Forecasting

3. Tephigram Thermodynamic diagram showing the vertical structure of the atmosphere. Temperature (°C) Dew­pointtemperature (°C) ENVI 1400 : Meteorology and Forecasting

4. Temperature (°C) Pressure (mb) PotentialTemperature (°C)or ‘dry adiabat’ ENVI 1400 : Meteorology and Forecasting

5. Saturationmixing ratio (g kg-1) Saturated Adiabat ENVI 1400 : Meteorology and Forecasting

6. Much of the change in air temperature with altitude is due purely to the reduction in pressure. It is often easier to work with a measure of temperature that accounts for this pressure-related change in T, allowing us to focus on real differences in the energy content of the gas. The Potential Temperature is one such measure. Potential temperature,  (K) is defined as the temperature a parcel of air would have if moved adiabatically to a pressure level of 1000 mb. R/Cp = 0.286 for air T must be in Kelvin Potential Temperature ENVI 1400 : Meteorology and Forecasting

7. As a parcel of air is lifted, the pressure decreases & the parcel expands and cools at the dry adiabatic lapse rate. As the parcel cools, the saturation mixing ratio decreases; when it equals the actual water vapour mixing ratio the parcel becomes saturated and condensation can occur. The level at which saturation occurs is called the lifting condensation level. Adiabatic Lifting Saturation mixing ratioequal to actual watervapour mixing ratio of parcel Liftingcondensationlevel Dew pointat surface ENVI 1400 : Meteorology and Forecasting

8. If the parcel continues to rise, it will cool further; the saturation mixing ratio decreases, and more water condenses out. Condensation releases latent heat; this offsets some of the cooling due to lifting so that the saturated air parcel cools at a lower rate than dry air. The saturated (or wet) adiabatic lapse rate is NOT constant, but depends upon both the temperature and pressure. ENVI 1400 : Meteorology and Forecasting

9. If adiabatic ascent of a parcel of air results in a temperature less than the environmental temperature at any given level, then the air parcel will be more dense than the surrounding air, and will fall back towards its original level. Such conditions are described as (statically) stable. Similarly a parcel forced downward, under stable conditions will warm adiabatically to a temperature greater than the surrounding air, will be less dense, and will rise back towards its original level. Stability EnvironmentalLapse Rate Dry adiabaticascent of surfaceair parcel Environment warmerthan lifted parcel stable ENVI 1400 : Meteorology and Forecasting

10. EnvironmentalLapse Rate Dry AdiabaticLapse Rate Lifted air is warmerthan environment unstable If adiabatically lifted air is warmer than the surrounding environment, it will be less dense, and therefore buoyant, and will continue to rise. Such conditions are described as statically unstable, or convective. This is common near the surface when heated by sunlight. ENVI 1400 : Meteorology and Forecasting

11. Theoretical maximumaltitude to which parcelmay overshoot Equal areas Equal areas on a tephigram represent equal amounts of energy. The buoyant potential energy available is represented by the area between the environmental temperature curve and the adiabatic lapse rate. As the parcel rises, this is converted to kinetic energy. The rising parcel may overshoot its level of neutral buoyancy by an amount that just uses up all the kinetic energy. ENVI 1400 : Meteorology and Forecasting

12. Adiabatic lifting (dry & wet) never results in the air temperature exceeding that of the environment. Lifting can only take place if forced, and at the expense of using energy. This is sometimes called forced convection and may occur due to mechanical mixing of stable air in strong winds. Cloud is formed if air lifted above the lifting condensation level (LCL), but remains limited to extent of parcel lifted from below. Absolute Stability stable LCL Temperature at surface Dew point at surface ENVI 1400 : Meteorology and Forecasting

13. Any adiabatic lifting results in air that is warmer than its environment, and thus in buoyant convection. The buoyancy force increases at the lifting condensation level due warming by the release of latent heat. Strong solar heating of the surface, or advection over a warmer surface often results in unstable, or convective, conditions in the boundary layer. Cumulus clouds frequently form in such conditions. Absolute Instability Cloud overshoots level of neutral stability stable unstable LCL Temperature at surface Dew point at surface ENVI 1400 : Meteorology and Forecasting

14. Forced adiabatic lifting of an air parcel through a region of static stability such that wet adiabatic lifting succeeds in raising the temperature above the environmental temperature. At this point, the parcel becomes convectively unstable and continues to lift under its own buoyancy. Conditional Instability stable unstable stable LCL Temperature at surface Dew point at surface ENVI 1400 : Meteorology and Forecasting

15. The column of air A-B has a lapse rate less than the dry adiabatic lapse rate, and is thus stable. If the column is forced to lift adiabatically, the whole columncools. If the lower part of the column reaches saturation [A'], it starts to cool at the wet adiabatic lapse rate – if this is less than the lapse rate of the column A'-B‘, the column becomes unstable. This type of instability may occur during large scale lifting up frontal surfaces or flow over mountain ranges. Convective Instability B' B A' A LCL ENVI 1400 : Meteorology and Forecasting

16. ENVI 1400 : Meteorology and Forecasting

17. ENVI 1400 : Meteorology and Forecasting

18. ENVI 1400 : Meteorology and Forecasting

19. ENVI 1400 : Meteorology and Forecasting