1 / 8

Twin Spine Installation

Twin Spine Installation. Twin Spine Installation.

rayya
Download Presentation

Twin Spine Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Twin Spine Installation

  2. Twin Spine Installation Installation of a Twin Spine is very simple and easy. Before you begin, make sure you have a copy of the installation instructions, the necessary materials and the electrical conduit has been run to the sign location. If you have an 8’ X 5’, a 10’ X 5’ or a 12’ X 6’ you may need some type of mechanical lifting assistance to set the base. Make sure you have the proper permits.

  3. Twin Spine Installation • Dig a Hole

  4. Twin Spine Installation • Set base in hole. Use blocks to aid in leveling base.

  5. Twin Spine Installation Pour ready mix concrete. Make sure base is level and conduit for electrical lines lines is installed

  6. Twin Spine Installation • Your sign will be delivered on a wooden skid. You will need some mechanical means of lifting your sign so as to place it on the base. Two legs extending from the bottom of the sign should slide into the two larger legs of the base.

  7. Twin Spine Installation • After sign legs have been inserted into the base legs, tighten the four bolts on the base legs and make electrical connections.

  8. Twin Spine Installation Install cowlings and enjoy your new sign.

More Related